Build SDL's Wayland backend next to X11 and ask SDL for "wayland,x11"
on Linux, so the window runs natively under a Wayland compositor instead
of through XWayland. SDL loads libwayland, xkbcommon and libdecor at run
time, so systems without them, or sessions without WAYLAND_DISPLAY, keep
using X11. SDL_VIDEODRIVER still overrides the choice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Writes the 80-byte status described in #2746: the sceVideoOutGetOutputStatus
fields followed by zeros, with the documented codes for a null status and an
unknown handle.
(cherry picked from commit e893efad2d0a7b90243d07bf6669cc9b5f540432)
fstat on a guest socket descriptor passed the guest number to the host,
which has no such descriptor, and threw ("FillFileStat: fstat failed for
fd 268435460"); sceKernelFstat returned EBADF. FreeBSD fills the stat
buffer for a socket through soo_stat (sys/kern/sys_socket.c):
bzero((caddr_t)ub, sizeof (*ub));
ub->st_mode = S_IFSOCK;
...
if ((sb->sb_state & SBS_CANTRCVMORE) == 0 || sbavail(sb))
ub->st_mode |= S_IRUSR | S_IRGRP | S_IROTH;
ub->st_size = sbavail(sb) - sb->sb_ctl;
...
if ((sb->sb_state & SBS_CANTSENDMORE) == 0)
ub->st_mode |= S_IWUSR | S_IWGRP | S_IWOTH;
and pru_sense_null (sys/kern/uipc_socket.c) adds
st_blksize = so->so_snd.sb_hiwat.
fstat and sceKernelFstat now answer a guest socket from the socket
table: S_IFSOCK, the read bits until the receive side is shut down and
drained, the write bits until the send side is shut down, st_size from
the bytes queued and st_blksize from the send buffer size, other fields
zero. shutdown records which side it closed. A closed socket descriptor
returns EBADF. The differences from the console (peer shutdown, the
host's FIONREAD and SO_SNDBUF, socketpair identity) are listed in
TechnicalDebt.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
sceNetConnect() on a connected datagram socket rejected an address
whose family is AF_UNSPEC (a null address) with EINVAL before touching
the socket, so the socket stayed connected: sceNetGetpeername() still
reported the old peer and datagrams from any other sender were dropped
by the host.
FreeBSD 11.4 disconnects a connected datagram socket first and only then
looks at the address. sys/kern/uipc_socket.c, soconnectat():
* If protocol is connection-based, can only connect once.
* Otherwise, if connected, try to disconnect first. This allows
* user to disconnect by connecting to, e.g., a null address.
*/
if (so->so_state & (SS_ISCONNECTED|SS_ISCONNECTING) &&
((so->so_proto->pr_flags & PR_CONNREQUIRED) ||
(error = sodisconnect(so)))) {
udp_disconnect() (sys/netinet/udp_usrreq.c) clears the peer and keeps
the local port. connect(2): "Datagram sockets may dissolve the
association by connecting to an invalid address, such as a null
address." libkernel's connect gets the same change in #4498.
A connected datagram socket given an address whose family byte is 0 is
now disconnected on the host first (AF_UNSPEC on Linux, a zeroed
address of the socket's family on Windows), and the call then fails
with EINVAL as before. Linux also drops an ephemeral local port on that
disconnect, so the port is bound again on the wildcard address, which
is what FreeBSD leaves. A host failure during the disconnect is
returned as the call's error. Stream sockets keep the previous path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The driver had no handler for the PFP INDEX_ATTRIBUTES_INDIRECT packet,
so a submission with it threw "opcode is not known in the reference".
The packet now reads the 16-byte record at attribute_base +
attribute_index * 16 when it executes and loads INDEX_BASE,
INDEX_BUFFER_SIZE and INDEX_TYPE from it as the direct packets do.
The packet encoding follows PAL's BuildIndexAttributesIndirect and the
record layout PAL's IndexAttribIndirect (gfx9Chip.h, c5e80007).
indirect_mode 1, reserved bits and record index types above 3 throw.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A registered range larger than 64 MiB is imported one 64 MiB window at a
time for buffer and fill accesses instead of whole, and the live imports
stay under a budget: APS5_HOST_IMPORT_MIB, else the larger of 6 GiB and
half the physical memory, at most the largest host heap less 2 GiB
(imports and type-3 mirrors share it; #167's rule). An import past the budget
retires the least recently used imports not used in the last 256
lookups.
- An access across window edges imports the cells it touches, grown to
the union of the range's imports it overlaps, so uses across
neighbouring edges share one import instead of replacing each other.
- An address-based build (AcquireRegistered) imports the range whole; a
window over its first byte does not serve it.
- Every refusal (alignment, a failed run, a held import, the budget with
what may be evicted) is decided before anything is retired.
- An import made when a range is mapped never evicts: the map observer
holds no GPU lock.
The window size and the budget have setters for the tests.
The mimalloc in PS5MC (PPSA99420) reads vm.overcommit at start-up and
stopped on the unsupported name. It reports FreeBSD's default, 0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guest path resolution trimmed the trailing slash of a path under a
mount alias (/savedata0, /download0, /app0 and the others), so the host
saw "file" for "file/": unlink, remove, sceKernelUnlink and rename
removed or moved the file, open opened it, and chmod and access
succeeded on it. The same path outside an alias already failed with
ENOTDIR, because the host got the slash.
FreeBSD 11.4 rejects it in lookup() (sys/kern/vfs_lookup.c):
/*
* If we're processing a path with a trailing slash,
* check that the end result is a directory.
*/
if ((cnp->cn_flags & TRAILINGSLASH) && dp->v_type != VDIR) {
error = ENOTDIR;
goto bad2;
}
On Linux and macOS a path under an alias now keeps its trailing slash
on the host path, as paths outside an alias do, so the host fails with
ENOTDIR for a file and directories with a trailing slash still work.
Windows keeps the previous behaviour; TechnicalDebt records it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The dolphin_libretro core of RetroArch (PPSA99169) reads {CTL_HW,
HW_REALMEM} as the machine's memory size and stopped on the unsupported
MIB. It reports the same value as hw.physmem.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PS5CEMU-HAR (PPSA99360, ps5-payload-dev build, relinks with
--trap-sdk-syscall-stubs) imports the data objects sys_siglist
(yCdGspbNHZ8) and sys_nsig (ZD+Dp+-LsGg) from libSceLibcInternal.prx;
the import audit lists both as absent (registry entries 364 and 378,
after pthread_setaffinity_np at 276). No run has reached them yet; the
predicted stop line is
FAIL: unresolved ELF import ZD+Dp+-LsGg (sys_nsig) from libSceLibcInternal.prx
or yCdGspbNHZ8 (sys_siglist), whichever the loader resolves first.
The table and count are FreeBSD 11.4 lib/libc/gen/siglist.c (8c639945):
32 descriptions, signal 0 to SIGUSR2 (NSIG 32), and sys_nsig is their
number, 32. ps5-payload-dev declares both as objects exported by
libSceLibcInternal and its strsignal reads them.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
