From d16ca973802cc884f6bc463b140403a30bb9bc6d Mon Sep 17 00:00:00 2001 From: Kris Austin Date: Sun, 18 Oct 2026 21:35:32 -0500 Subject: [PATCH] Snapmaker U1: set the top cover purifier mode and match Snapmaker's start G-code (#16590) Port the U1 top cover purifier mode and the related start G-code changes from Snapmaker's Orca (Snapmaker/OrcaSlicer#504 and Snapmaker/OrcaSlicer#1005, as of 8931178229). The start G-code sends SET_PURIFIER_MODE for strong cooling, weak cooling or keep warm, picked from the lowest softening temperature of the filaments used through min_vitrification_temperature, with Snapmaker's thresholds and parameters. It also pre-extrudes the first tool, and turns the part fan off for probing and back on for nozzle cleaning. U1 filament presets use Snapmaker's softening temperatures. U1 presets that have no U1 version in Snapmaker's Orca use the value Snapmaker gives that material on the U1. --- resources/profiles/Snapmaker.json | 2 +- .../profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json | 3 +++ .../profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json | 3 +++ .../profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json | 2 +- .../filament/Snapmaker PETG Translucent @U1 base.json | 5 ++++- .../Snapmaker/filament/Snapmaker PETG-CF @U1 base.json | 2 +- .../profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json | 3 +++ .../Snapmaker/filament/Snapmaker PLA Eco @U1 base.json | 3 +++ .../Snapmaker/filament/Snapmaker PLA Glow @U1 base.json | 3 +++ .../Snapmaker/filament/Snapmaker PLA Metal @U1 base.json | 3 +++ .../profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json | 3 +++ resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json | 3 +++ .../Snapmaker/filament/Snapmaker TPU 95A @U1 base.json | 2 +- .../profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json | 2 +- resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json | 3 +++ .../Snapmaker/filament/Snapmaker TPU High-Flow @U1.json | 3 +++ .../Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json | 2 +- .../Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json | 2 +- .../Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json | 2 +- .../Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json | 2 +- 20 files changed, 43 insertions(+), 10 deletions(-) diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json index 4978095364..4abf624a41 100644 --- a/resources/profiles/Snapmaker.json +++ b/resources/profiles/Snapmaker.json @@ -1,6 +1,6 @@ { "name": "Snapmaker", - "version": "02.04.00.17", + "version": "02.04.00.18", "force_update": "0", "description": "Snapmaker configurations", "machine_model_list": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json index af8c929c82..df243f2bbb 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json @@ -49,5 +49,8 @@ ], "pressure_advance": [ "0.02" + ], + "temperature_vitrification": [ + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json index 409bbdd793..e566ab4682 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json @@ -46,5 +46,8 @@ ], "fan_min_speed": [ "0" + ], + "temperature_vitrification": [ + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json index d081c6f9d8..e9164a7c2f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json @@ -45,7 +45,7 @@ "250" ], "temperature_vitrification": [ - "178" + "70" ], "fan_max_speed": [ "20" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json index 6b51cd2535..5a712d7483 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json @@ -4,5 +4,8 @@ "inherits": "fdm_filament_petg", "from": "system", "filament_id": "OFW8lqnb", - "instantiation": "false" + "instantiation": "false", + "temperature_vitrification": [ + "70" + ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json index 076dc7e2b9..562c7ce6e3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json @@ -60,7 +60,7 @@ "250" ], "temperature_vitrification": [ - "178" + "70" ], "fan_max_speed": [ "20" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json index 3f41d5579e..f0a41e4cc1 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json @@ -34,5 +34,8 @@ ], "nozzle_temperature": [ "220" + ], + "temperature_vitrification": [ + "45" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json index 67e0d74b2e..23586149c3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json @@ -34,5 +34,8 @@ ], "filament_cooling_final_speed": [ "60" + ], + "temperature_vitrification": [ + "45" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json index 97d2a7ea61..15e1d514ad 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json @@ -34,5 +34,8 @@ ], "nozzle_temperature": [ "220" + ], + "temperature_vitrification": [ + "45" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json index 87c26fdb09..63648c9206 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json @@ -40,5 +40,8 @@ ], "nozzle_temperature": [ "220" + ], + "temperature_vitrification": [ + "45" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json index f2b2033dd9..4444e1f7ab 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json @@ -31,5 +31,8 @@ ], "slow_down_layer_time": [ "8" + ], + "temperature_vitrification": [ + "45" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json index 5f6820fa39..cedc844340 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json @@ -50,5 +50,8 @@ "additional_cooling_fan_speed": [ "70", "70" + ], + "temperature_vitrification": [ + "30" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json index d61e2adb1b..aa0899f247 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json @@ -137,7 +137,7 @@ "240" ], "temperature_vitrification": [ - "60" + "30" ], "nozzle_temperature_range_low": [ "200" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json index 6d5c2c4c73..474b9a0620 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json @@ -302,7 +302,7 @@ "-1" ], "temperature_vitrification": [ - "60" + "30" ], "textured_cool_plate_temp": [ "40" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json index 7de9731406..c4f9ee7985 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json @@ -29,5 +29,8 @@ "additional_cooling_fan_speed": [ "70", "70" + ], + "temperature_vitrification": [ + "30" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json index a3afba536b..dfa2fe0526 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json @@ -49,5 +49,8 @@ "additional_cooling_fan_speed": [ "70", "70" + ], + "temperature_vitrification": [ + "30" ] } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json index 6971ed458f..99dda99752 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json @@ -97,7 +97,7 @@ "20", "12" ], - "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", "machine_tool_change_time": "5", "max_layer_height": [ "0.14", diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json index 8438b121cb..be5af23449 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json @@ -97,7 +97,7 @@ "20", "12" ], - "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", "machine_tool_change_time": "5", "max_layer_height": [ "0.32", diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json index ec01b97698..41fb2bf76e 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json @@ -97,7 +97,7 @@ "20", "12" ], - "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", "machine_tool_change_time": "5", "max_layer_height": [ "0.42", diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json index 5bc11525e9..6c31cf7633 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json @@ -97,7 +97,7 @@ "20", "12" ], - "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", "machine_tool_change_time": "5", "max_layer_height": [ "0.56",