Since ADR-296 the sensing server binds its UDP receiver to 127.0.0.1 by
default, and docker-entrypoint.sh never set a UDP bind. Inside a
container that address cannot receive from the published 5005/udp port,
so the default image never shows a node (#2089, follow-up to #1394).
The entrypoint now binds UDP on 0.0.0.0 only when the operator has set
an ADR-296 source guard (RUVIEW_UDP_ALLOW, RUVIEW_UDP_INSECURE_LAN, or
the matching CLI flags). Without a guard it keeps the loopback bind and
prints a note explaining why no node will appear and what to set,
including the macOS bridge-gateway allowlist. An explicit RUVIEW_UDP_BIND
or --udp-bind still wins.
I chose this over defaulting the bind to 0.0.0.0 unconditionally. With
no guard that would make the server refuse to start (exit 1) in auto
mode, which binds UDP, and the guard would still have to be supplied. The
change keeps ADR-296's fail-closed rule as is: a routable bind never
happens without an allowlist or the explicit insecure opt-in. Auth
defaults are unchanged.
The entrypoint also normalizes RUVIEW_UDP_INSECURE_LAN=1/yes/on to true,
since clap rejects 1 for that flag.
The compose service passes RUVIEW_API_TOKEN, the RUVIEW_UDP_* variables
and SENSING_ALLOWED_HOSTS through from the shell, with notes on the
exit-64 auth check, the macOS gateway allowlist and the 421 Host check.
The README and user-guide Docker quickstarts now set a token, and the
user guide gains a "Receiving ESP32 frames in Docker" section.
Co-Authored-By: claude-flow <ruv@ruv.net>
Background
Issue #937 in the cognitum-v0 appliance repo flagged that the
`cognitum-csi-capture` systemd unit shipped `--simulate` by default,
silently serving synthetic CSI tagged as production telemetry on
`/api/v1/sensor/stream`. That's a textbook trust-eroding pattern — the
single most-cited "where's the real data?" evidence external reviewers
(#943, #934) point at when they call the project AI-slop.
A grep across THIS tree surfaced the exact same anti-pattern in three
places:
docker/docker-compose.yml:27 # auto (default) — probe ESP32, fall back to simulation
docker/docker-entrypoint.sh:14 # CSI_SOURCE — data source: auto (default), ...
main.rs:6435 info!("No hardware detected, using simulation"); "simulate"
The sensing-server's `auto` source resolver at main.rs:6425-6440
silently fell back to synthetic with only an `info!` log line as the
signal. Downstream consumers calling `/api/v1/sensing/latest` or
`/ws/sensing` had no in-band way to know they were being served fake
data.
Fix
`auto` now refuses to fall back. When neither ESP32 UDP nor host WiFi
is detected, the server logs a clear `error!` explaining the situation
and exits 78 (EX_CONFIG). The error message names the two ways to
proceed: provision real hardware, or set `--source simulated` /
`CSI_SOURCE=simulated` explicitly. Existing operators who already use
`--source simulated` (or its legacy `simulate` alias) are unaffected —
the alias is preserved for back-compat.
Docker entrypoint comment, docker-compose comment, and the Tauri
desktop app's source-default path also updated to reflect the new
posture. The desktop app keeps its `simulated` default because it's
an explicit demo product — the value passed downstream is the
*explicit* `simulated`, not `auto`, so the server tags it correctly
and never lies about its data source.
Validation
cargo build -p wifi-densepose-sensing-server --no-default-features
cargo test -p wifi-densepose-sensing-server --no-default-features
→ 122 / 122 pass, build clean (existing pre-fix warnings unchanged).
Deployment
⚠ Breaking change for unattended deployments that relied on the
`auto → simulated` silent fallback. That is exactly the failure mode
this PR fixes: pretending to serve real sensing data when the source
is fake. Operators who genuinely want demo mode set
`CSI_SOURCE=simulated` explicitly; the error message and the
docker-compose comment both point them there.
Docker Desktop on Windows demultiplexes inbound UDP from multiple source
IPs onto a single virtual socket, silently dropping packets from all but
one ESP32 node. This makes multi-node sensing setups appear to work
(WebSocket connects, packets flow on the host) while only one node's CSI
ever reaches the container.
Adds scripts/udp-relay.py (stdlib only) which collapses multi-source UDP
to a single loopback source so Docker's forwarding accepts every packet.
Verified locally: 6 packets from 3 distinct source ports all arrive at
the receiver from a single relay socket.
Updates docker/docker-compose.yml with an inline comment pointing
Windows users at the relay + 5006:5005 mapping. Linux/macOS hosts are
unaffected and need no changes.
Also documents the workaround alongside fixes for #188 (UI 404 from
relative --ui-path) and #438 (boot loop on --edge-tier 1/2 against
pre-v0.4.3.1 firmware) as new sections 9-11 of docs/TROUBLESHOOTING.md.
Supersedes the docs-only PR #413.
Closes#374, #386
Refs #188, #438, #301
Fixes#384: docker run with --source/--tick-ms flags now works correctly.
Fixes#399: model files in mounted volumes are now discoverable via MODELS_DIR env var.
Root cause (issue #384):
The Dockerfile used ENTRYPOINT ["/bin/sh", "-c"] with a shell-form CMD.
When users passed flags like `--source wifi --tick-ms 500` as docker run
arguments, Docker replaced CMD entirely, resulting in
`/bin/sh -c "--source wifi --tick-ms 500"` which executes `--source` as
a shell command → `--source: not found`.
Root cause (issue #399):
Model directory was hardcoded to the relative path `data/models`. When Docker
users mounted models to `/app/models/`, the scan looked in the wrong place.
Changes:
1. docker/docker-entrypoint.sh (new):
- Proper entrypoint script that handles both env-var-based defaults and
user-passed CLI flags
- No arguments → starts server with CSI_SOURCE env var as --source
- Flag arguments (start with -) → prepends /app/sensing-server + defaults,
appends user flags (clap last-wins allows overrides)
- Non-flag first arg → exec passthrough (e.g., /bin/sh for debugging)
- Sets --bind-addr 0.0.0.0 (was 127.0.0.1 which blocks container access)
2. docker/Dockerfile.rust:
- Switch from ENTRYPOINT ["/bin/sh", "-c"] to exec-form entrypoint
- Add MODELS_DIR env var (default: data/models)
- COPY the entrypoint script into the image
3. docker/docker-compose.yml:
- Remove shell-form command (entrypoint handles defaults)
- Add MODELS_DIR env var
4. model_manager.rs + main.rs:
- Replace hardcoded `data/models` path with `effective_models_dir()`
/ `models_dir()` that reads MODELS_DIR env var at runtime
- Docker users can now: docker run -v /host/models:/app/models -e MODELS_DIR=/app/models
5. tests/test_docker_entrypoint.sh (new, 17 tests):
- Default CSI_SOURCE substitution (6 assertions)
- Custom CSI_SOURCE propagation
- User-passed flag arguments (--source, --tick-ms, --model)
- Unset CSI_SOURCE defaults to auto
- Explicit command passthrough
- MODELS_DIR env var propagation
- Docker default changed from --source simulated to --source auto
(auto-detects ESP32 on UDP 5005, falls back to simulation)
- Pose derivation now driven by real sensing features: motion_band_power,
breathing_band_power, variance, dominant_freq_hz, change_points
- Temporal feature extraction: 100-frame circular buffer, Goertzel
breathing rate estimation (0.1-0.5 Hz), frame-to-frame L2 motion
detection, SNR-based signal quality metric
- Signal field driven by subcarrier variance spatial mapping instead
of fixed animation circle
- UI data source indicators: LIVE/RECONNECTING/SIMULATED banner on
sensing tab, estimation mode badge on live demo tab
- Setup guide panel explaining ESP32 count requirements for each
capability level (1x: presence, 3x: localization, 4x+: full pose)
- Tick rate improved from 500ms to 100ms (2fps to 10fps)
- Fixed Option<f64> division bug from PR #83
- ADR-035 documents all decisions
Closes#86
Co-Authored-By: claude-flow <ruv@ruv.net>
The sensing server defaults to HTTP :8080 and WS :8765, but Docker
exposes :3000/:3001. Added --http-port 3000 --ws-port 3001 to CMD
in both Dockerfile.rust and docker-compose.yml.
Verified both images build and run:
- Rust: 133 MB, all endpoints responding (health, sensing/latest,
vital-signs, pose/current, info, model/info, UI)
- Python: 569 MB, all packages importable (websockets, fastapi)
- RVF file: 13 KB, valid RVFS magic bytes
Also fixed README Quick Start endpoints to match actual routes:
- /api/v1/health → /health
- /api/v1/sensing → /api/v1/sensing/latest
- Added /api/v1/pose/current and /api/v1/info examples
- Added port mapping note for Docker vs local dev
Co-Authored-By: claude-flow <ruv@ruv.net>
- Add docker/ folder with Dockerfile.rust (132MB), Dockerfile.python (569MB),
and docker-compose.yml
- Remove stale root-level Dockerfile and docker-compose files
- Implement --export-rvf CLI flag for standalone RVF package generation
- Generate wifi-densepose-v1.rvf (13KB) with model weights, vital config,
SONA profile, and training provenance
- Update README with Docker pull/run commands and RVF export instructions
- Update test count to 542+ and fix Docker port mappings
- Reply to issues #43, #44, #45 with Docker/RVF availability
Co-Authored-By: claude-flow <ruv@ruv.net>
