- firmware/openwrt-wn586x3/: the patch set that made a Wavlink WL-WN586X3
Rev A (MT7981B + MT7976C) emit CSI on OpenWrt 24.10.8. It contains:
MediaTek's mt7915 CSI driver patch rebased onto the mt76 revision 24.10.8
pins (BSD-3-Clause-Clear, MediaTek author line kept); the Rev A board
patch (GPL-2.0); a buffer-overrun fix for `mt76-vendor dump csi`; and
an attribute-enum fix for MtkCSIdump. Each patch keeps the licence of
the code it modifies. There are no images, firmware blobs, or captures.
- docs/mediatek-router-csi.md: an operator guide covering supported
silicon, the image build route that was tested, arming CSI, the
bridge, `--source mediatek`, endpoints and provenance labels, what the
data is not, evidence, and troubleshooting. Every claim is tagged
MEASURED, CODE-DERIVED, CLAIMED, or SYNTHETIC.
- scripts/mediatek-csi-phase-stability.py: a read-only reproducer for
the one MEASURED offline result. On one MT7976C radio, the cross-chain
phase arg(H0*conj(H1)) moves 0.014-0.039 rad (p50) between adjacent
frames for well-sampled transmitters, against about 1.56 rad for raw
per-chain phase, which is what random phase gives. It never prints a
transmitter address. The captures it was run on are not in the tree.
- ADR-266 Amendment 1: vendor CSI exists on MT7981 through MediaTek's
public feed patch, demonstrated on one board model, and still
`mediatek:physical-unvalidated`. The hardware gates remain open.
- user-guide.md and the bridge README link to the guide.
Developed in whitsentry, a RuView-based project.
Co-Authored-By: claude-flow <ruv@ruv.net>
