Integrate reviewed source PRs #2201-#2223, #2225-#2231, #2235-#2240, #2242 and #2243 (firmware README hunks remain in #2247). Regenerate one package manifest after integration, validate native Windows test execution, bound MTK listener startup, support official C6 release bundles, and retain stronger release metadata gates.
The sensing-server bridge builds every node frame with a zero phase
placeholder and the fuser combined those phases across nodes as if they
were measured against one reference. ESP32 nodes each run an independent
crystal with a random PLL phase after reset; mesh time sync aligns frames,
not RF phase, so there is nothing to combine.
- Add PhaseReference (Unavailable / NodeLocal / Shared{id}) to
MultiBandCsiFrame. The server bridge declares Unavailable.
- MultistaticFuser combines phase only when every frame declares the same
Shared id. Otherwise fused_phase is empty and FusedSensingFrame carries
PhaseFusion::AmplitudeOnly(reason). Amplitude fusion is unchanged.
- The ADR-134 CIR blend is skipped when the phase is a placeholder.
- TrustedOutput and /health/ready (trust.phase_fusion) report the mode
and reason.
- ADR-029 status note updated.
Refs #1752, #1710, #1750.
Co-Authored-By: claude-flow <ruv@ruv.net>
Proposed. Defines the RangeObservation record, a warn-only check mode
against --node-positions with tolerances from MEASURED ESP32-S3 FTM
bench data, per-boot calibration, and a fill mode gated off until a
source shows MEASURED p90 link error <= 0.3 m (expected from UWB).
Records the FTM bias between responder starts plainly and parks FTM
for check mode, coarse gating and time sync rather than dropping it.
Links ADR-144, ADR-281, rufield ADR-261, #2109 and #2133.
Co-Authored-By: claude-flow <ruv@ruv.net>
The spatial.evidence.v1 format is specified in WeftOS ADR-107 section 7.
ADR-382 records the part RuView emits (envelope, room_enu frame,
rf_gaussian, rf_link_observation, validation ranges, versioning) so the
contract is readable from this repository, and names ADR-107 as its origin.
ADR-107 was amended on 2026-10-03: one yaw convention (degrees
counter-clockwise from room +x), new tof_depth and radar_range types, and
an optional sensor block on radar_track_point. The two RF bodies did not
change. The crate now documents the yaw sense of an rf_gaussian
orientation and tests it (+90 degrees about +z maps local x onto room +y),
and tests that the amended example lines are rejected as unknown types by
this RF-only mirror.
Co-Authored-By: claude-flow <ruv@ruv.net>
home-assistant.md now describes current behaviour: the 15 announced
entities (13 with --privacy-mode) with their source and availability
rule, the entities that are not announced and why, publish rates and
retention, the persisted client id, and what privacy mode does and does
not cover. The guide no longer documents --semantic* flags that
sensing-server does not accept, and it drops the HIPAA/GDPR/CCPA
claims.
ADR-115 §11 records what P4.5 wired and what it did not, with a
before/after measurement against a real broker (MEASURED, one live
node).
Refs #2085, #2093
Co-Authored-By: claude-flow <ruv@ruv.net>
- firmware/openwrt-wn586x3/: the patch set that made a Wavlink WL-WN586X3
Rev A (MT7981B + MT7976C) emit CSI on OpenWrt 24.10.8. It contains:
MediaTek's mt7915 CSI driver patch rebased onto the mt76 revision 24.10.8
pins (BSD-3-Clause-Clear, MediaTek author line kept); the Rev A board
patch (GPL-2.0); a buffer-overrun fix for `mt76-vendor dump csi`; and
an attribute-enum fix for MtkCSIdump. Each patch keeps the licence of
the code it modifies. There are no images, firmware blobs, or captures.
- docs/mediatek-router-csi.md: an operator guide covering supported
silicon, the image build route that was tested, arming CSI, the
bridge, `--source mediatek`, endpoints and provenance labels, what the
data is not, evidence, and troubleshooting. Every claim is tagged
MEASURED, CODE-DERIVED, CLAIMED, or SYNTHETIC.
- scripts/mediatek-csi-phase-stability.py: a read-only reproducer for
the one MEASURED offline result. On one MT7976C radio, the cross-chain
phase arg(H0*conj(H1)) moves 0.014-0.039 rad (p50) between adjacent
frames for well-sampled transmitters, against about 1.56 rad for raw
per-chain phase, which is what random phase gives. It never prints a
transmitter address. The captures it was run on are not in the tree.
- ADR-266 Amendment 1: vendor CSI exists on MT7981 through MediaTek's
public feed patch, demonstrated on one board model, and still
`mediatek:physical-unvalidated`. The hardware gates remain open.
- user-guide.md and the bridge README link to the guide.
Developed in whitsentry, a RuView-based project.
Co-Authored-By: claude-flow <ruv@ruv.net>
A real MT7981 (WL-WN586X3, MT7981B + MT7976C) CSI report arrived with
rx_mode = MT_PHY_TYPE_OFDM for a 2.4 GHz client. The MTC1 PpduType had no
pre-HT value, so a bridge had to drop the frame. MediaTek's CSI driver
treats legacy OFDM as its own tone-mask group, and association traffic is
legacy-rate, so these frames are routine rather than a corner case.
Add PpduType::Legacy = 6 and PpduType::Unknown = 7. Values 1-5 and the
72-byte header are unchanged. A decoder built before this change rejects
6 and 7 as UnknownPpduType (fails safe, drops the frame), so MTC1
consumers need a rebuild.
ADR-267 gains Amendment 1 recording the change, its compatibility, and the
observed 1x1x64 dimensions of the motivating capture. The capture is not
in the tree: it holds a client transmitter address and raw CSI.
Developed in whitsentry, a RuView-based project.
Co-Authored-By: claude-flow <ruv@ruv.net>
Add --udp-tee / RUVIEW_UDP_TEE: every datagram the source allowlist admits
is copied unchanged to up to four loopback targets, so a fusion host or
Cognitum cog can read full I/Q, sequence numbers and sync packets without
binding the CSI port. Targets must be loopback and may not reuse the
listener port or port 0. Sends are non-blocking and drops are counted. Off
by default.
Tests: cargo test -p wifi-densepose-sensing-server --no-default-features
--lib udp_tee (6 passed) and --bin sensing-server (332 passed). Loopback
smoke test of the debug binary: a 288-byte datagram sent to the UDP port
arrived byte for byte at the tee target, and a non-loopback --udp-tee
target made the server exit 1 with "must be a loopback address".
Co-Authored-By: claude-flow <ruv@ruv.net>
Records the decision behind the two preceding firmware commits: why an
OTA'd image has to confirm itself, the health signals (STA IP plus one CSI
frame accepted by the stream sender), the 30 s minimum uptime and 120 s
deadline, the FORCE_FAIL test hook, ota_state in /ota/status, and the httpd
stack sizing.
MEASURED 2026-09-29:
- ESP32-S3 (16 MB, rollback bootloader): OTA push to ota_1, HTTP 200;
"httpd stack after POST /ota: 4900 of 8192 bytes never used";
pending_verify then valid; still valid on ota_1 after a hard reset.
A FORCE_FAIL build pushed to ota_0 rolled back to ota_1 after ~30 s.
- ESP32-C6 (4 MB layout, rollback bootloader): push to ota_1, HTTP 200;
pending_verify then valid ~28 s later; still valid after a hard reset.
Not yet verified: the 120 s no-IP timeout path, a true power cycle (an RTS
hard reset was used), and forced rollback on the C6.
Numbered 379: main has up to ADR-378 and open PRs claim nothing higher (2026-10-02).
Co-Authored-By: claude-flow <ruv@ruv.net>
On macOS 27, without Location Services, CoreWLAN redacts both the SSID and
the BSSID, while rssi, noise and channel stay real. resolve_bssid abstained
when both identities were blank, so every macOS scan was dropped and
`--source wifi` silently produced nothing.
- mac_wifi --scan-once marks its sample `"connected": true`. It is always the
single connected link, so a synthetic id cannot merge two networks.
- A redacted connected sample gets a stable locally administered synthetic
BSSID; the SSID stays empty. Unmarked redacted lines still abstain.
- `--source auto` that resolves to host WiFi now also binds UDP, and wifi_task
yields while the source is a live esp32, so ESP32 nodes that start after
the boot probe still promote the source (the #1004 rule). Without this, the
fix would make stock Macs ignore late-starting nodes.
- A missing helper is reported once, with the build command.
- ADR-025: Updated row + Amendment 1 recording the measured behaviour.
Measured on macOS 27: --source wifi gives source wifi:unnamed with sensing
ticks advancing; --source auto on a quiet port starts on wifi with
udp_receiver=true and promotes to esp32 (5 nodes) when real frames arrive.
Tests: wifiscan 158+1, sensing-server bin 332, all passing.
Co-Authored-By: claude-flow <ruv@ruv.net>
- Stale frames shown as live: spectrumWith now keeps only nodes in the
latest capture, so a node that stops streaming (or a failed capture)
leaves the waterfall and the "no CSI frames" card returns.
- Multi-antenna ESP32 nodes never reached the waterfall: with --spectrum
the parser adds chain-0 amplitudes (ADR-018 antenna-major) in a separate
field the SpectrumCollector reads; the kernel path is unchanged.
- Frames from different CSI layouts could be joined: spectrum results
carry their shape, and frames merge only when shape and bins match.
- Animation ran on assumed time: frames read the real clock (the one the
full render uses), so pulses keep the reported rates and the replay
keeps up when a frame fires late; replay lag is pruned with the nodes.
Tests: regression tests for each; npm test 193 pass, test:security 91
pass, engine tests 4 pass, validate passes.
Co-Authored-By: claude-flow <ruv@ruv.net>
The /ruview pane gains three views (keys 1/2/3) drawn in terminal Rasters
and animated in place with $.ui.blit (~12 fps, no redraws):
- CSI waterfall: per-subcarrier amplitude over time from the new
`esp32 --spectrum` capture, two frames per row via the half block,
5-95th percentile colour limits, replayed at the frames' arrival rate,
labelled MEASURED or SYNTHETIC from the packets' own flag; n cycles nodes.
- Radar: a 120-degree range fan with rings, a fading distance trail and a
sonar ping to the measured range; braille heart/breathing/distance charts
scaled to the data; a heart and breathing gauge that pulse at the
device-reported rates ("a metronome, not a waveform").
- A shimmer rule under the title; surfaces without Raster get a note.
Harness: captureEsp32 / ruview_esp32_capture take spectrum,
spectrum_bins (8-128) and spectrum_frames (8-256): a bounded ring of
binned amplitude frames per node, dominant shape, rate and synthetic flag.
The mod is split into model/raster/anim/views/register (own-file imports
only). Tests: 11 showcase + 11 mod Node tests, a --spectrum loopback test,
4 engine tests (waterfall tab sends --spectrum, draws the Raster, blits);
npm test 189 pass, test:security 90 pass, manifest verified, validate passes.
Evidence: MEASURED on an ESP32-C6 (COM11, release c6-adr110 v0.7.0, node 6)
streaming 7-18 Hz CSI to this host; a 1x256 capture renders the occupied
band against guard/null tones. Unpacked budget 384 -> 448 KiB (+~37 KB).
Co-Authored-By: claude-flow <ruv@ruv.net>
- mod/: a Claude Code mod (function hooks). /ruview opens a pane beside
the transcript with CSI nodes (rate, loss, RSSI, shape, SYNTHETIC) and an
optional ESPHome radar (presence, distance, device-reported vitals),
alerts (heartbeat-only boards + buffer-starvation hint), Refresh/Close
buttons and a one-line status; refreshed on $.clock.every.
- Reads only through the harness CLI beside it (fixed read-only argv,
--json) located via $.plugin.root (mods may import nothing else).
- Packaged in @ruvnet/ruview (mod/.claude-plugin, mod/hooks), listed in the
repo marketplace as ruview-live@ruview; `ruview mod` prints how to load it.
- @ruvnet/ruview 0.9.0; umbrella ruview 0.9.0 (still unpublished).
Verified: claude plugin validate (mod + marketplace); claude plugin test
2/2 x3 runs; harness 172 tests + 89 security; real Claude Code headless
`/ruview refresh` from an installed tarball and with the live radar kit.
Co-Authored-By: claude-flow <ruv@ruv.net>
- harness/ruview-umbrella -> npm `ruview` 0.8.0: one CLI and one MCP server
for the operator harness, Homecore and the vitals kernel. `ruview homecore
...`, `ruview kernel <doctor|info|selftest|parity|synth|analyze|bench>`,
`ruview capabilities`; everything else delegates to @ruvnet/ruview. MCP
serves ruview_* + homecore_* tools and the ui:// console (stdio + HTTP).
- @ruvnet/ruview 0.8.0: bin renamed `ruview-harness` (the umbrella owns
`ruview`; a clean tarball install showed the bin collision). New exports
(cli, cli-ui, mcp, mcp-http, ui, esphome, kernel); injectable MCP handler;
kernel as optional peer + setKernelImporter so the kernel resolves from
the umbrella's tree under linked/pnpm installs.
- mmwave --source esphome: dependency-free read-only ESPHome native API
client (private hosts only; encrypted/password APIs reported). Live Seeed
MR60BHA2 kit: presence, distance, device-reported HR/BR (MEASURED).
- monitor detects Ameba CSI buffer starvation; radar views in terminal UI
and console widget.
- homecore 0.1.0 and @ruvnet/ruview-kernel 0.1.0 gain ./cli exports.
Gates: harness 166 + 89 security, homecore 27 + 23, kernel 21 + 12,
umbrella 4; clean-dir tarball install smoke incl. live radar over HTTP MCP.
Local publish is a one-off exception to ADR-265 D2, recorded in ADR-376.
Co-Authored-By: claude-flow <ruv@ruv.net>
Live RTL8721Dx capture (node 3, COM10) reported 97% loss: one stray
sequence value (+52,835, then straight back) was counted as 52,834 lost
frames, and every late UDP packet re-counted its gap. The tracker now
treats a single out-of-window value as a stray, needs two agreeing frames
to accept a counter reset, and lets a late packet fill its own gap
(seqReordered / seqStrays / seqResyncs in the summary). Against ground
truth on the live board (unique sequence numbers over the span): 4,783 of
4,783 present, loss 0, 9 strays; the tracker matched both.
ADR-373 Amendment 2 records the live Realtek run: devices -> realtek,
7,404/7,404 packets decoded, monitor at 1500000 baud without a reset, and
12,549 live frames analyzed by the WASM kernel.
Co-Authored-By: claude-flow <ruv@ruv.net>
The flash flow's boot-log capture decoded serial lines and wrote text to a
stdout that the scrubbed child env leaves on cp1252. The ESP32-C6 release
firmware logs U+2192, so the capture died mid-boot (bootLog.captured=false);
an earlier abort would have hidden the CSI evidence and reported a good
flash as unvalidated. Write raw bytes instead. Regression test forces
PYTHONIOENCODING=cp1252 through a stand-in serial module (fails without
the fix). ADR-373 Amendment 2 records the real C6 flash evidence.
Co-Authored-By: claude-flow <ruv@ruv.net>
Findings from a hardware run of this branch against an RTL8721Dx board
(PL2303GC) and an ESP32-C6 (CP210x) on Windows 11:
- esp32 capture decodes Realtek RAC1 (ADR-323, CRC-verified, 8/16-bit
tones) and RHB1 heartbeats, ADR-110 sync and ADR-081 mesh packets, and
reports every CSI shape a node sends.
- Capture fails (no_decodable_packets / heartbeat_only) instead of
returning ok:true + MEASURED when nothing decodes; names
heartbeat-only senders.
- --analyze runs live single-antenna CSI through @ruvnet/ruview-kernel at
the measured frame rate with a bounded buffer.
- monitor opens the port with DTR/RTS deasserted (no node reboot), takes
--baud, and explains the C6/S3 USB-Serial/JTAG console.
- devices classifies Prolific 067B:23A3 as a Realtek board.
- Windows: owner-only ACL on the hosts file (fails closed); symlink test
skips only where Windows refuses symlinks.
- kernel build names uninitialized submodules when cargo fails.
- Parser ~3.2x faster (MEASURED, 0.42-0.52M -> 1.33-1.67M packets/s).
Co-Authored-By: claude-flow <ruv@ruv.net>
CI fixes (both failures on PR #2062 were in this branch):
- harness/ruview: remove `2.11.0` literals from training remedies; the
ADR-265 D3 version-literal gate rejects them.
- ruview-kernel workflow: install wasm32 for the toolchain pinned by
v2/rust-toolchain (the action only added it to `stable`); build.mjs now
fails fast with the exact `rustup target add` remedy.
Kernel optimization (ADR-368 amendment):
- New `analyze_flat` / `session_push_flat` ops via `call_f64`: WASM
`rvk_call_f64` (alignment-agnostic bytes) and napi `callF64(Float64Array)`.
`analyze()`/`session.push()` pack uniform frames automatically; irregular
input keeps the JSON path and its per-frame errors. `analyzeFlat()` is the
zero-copy entry. Shared `Session::step` makes both paths byte-identical on
identical f64 inputs (Rust test), and the binary path avoids serde_json's
non-correctly-rounded float parsing.
- MEASURED (`ruview-kernel bench --seconds 120`, one Linux x64 host):
2.82x (wasm) and 2.45x (napi) faster than the JSON transport.
- Profiled remaining cost (examples/profile_stages.rs): heart-rate ACF in
wifi-densepose-vitals dominates; left for a separate, output-reviewed
change. Rejected WASM +simd128 and opt-level=s after three measured runs
(bench/wasm-variants.mjs).
Device e2e (ADR-373 amendment):
- test/e2e/devices.e2e.mjs + `npm run test:e2e:devices` + new workflow
ruview-device-e2e.yml: pty-emulated MR60BHA2 and RPLIDAR through real
pyserial, a UDP ESP32 node, and the real iPhone relay, via the CLI.
- mmWave auto-detect keeps probe frames and reads only the remainder;
iPhone LiDAR gains max_frames and returns immediately when refused.
Suite wall time 19.6 s -> 5.6 s (MEASURED, dev container).
Co-Authored-By: claude-flow <ruv@ruv.net>
Claude-Session: https://claude.ai/code/session_015H55jmprfz4oHWXSFbX5rf
@ruvnet/ruview 0.7.0 gives CLI, MCP, and SDK access to RuView sensing
hardware on the machine it is attached to, and to other machines over SSH.
Devices (ADR-373, src/devices/):
- ruview_devices_scan: pyserial port list classified by USB VID:PID
(Espressif native USB, CP210x, CH34x, FTDI) into ESP32 / mmWave / RPLIDAR
roles with the command that confirms each.
- ruview_esp32_capture: receive-only UDP listener parsing ADR-018 CSI
frames, vitals, and the other 0xC511000x packets per node: rate,
sequence loss, RSSI, subcarriers, frequency, device vitals.
- ruview_mmwave_read: MR60BHA2 (60 GHz) and LD2410 (24 GHz) parsers ported
byte-for-byte from firmware mmwave_sensor.c; baud/frame auto-detect.
- ruview_lidar_read: RPLIDAR SCAN over serial (start/stop, DTR best-effort)
and the iPhone LiDAR relay as a WebSocket client (token only via
RUVIEW_LIDAR_TOKEN; statistics only, never raw depth).
- Dependency-free serial via a fixed pyserial pump (argv-only, bounded,
hex output immune to secret redaction). Schema-level port pattern
validation added to the policy validator.
- All device tools require the new `device-access` MCP grant.
Remote hosts (ADR-374, src/remote.js):
- ~/.config/ruview/hosts.json (0600), CLI-only `hosts add`; strict
name/target validation against ssh option and shell injection.
- `ssh -o BatchMode=yes -o StrictHostKeyChecking=yes -- <target>` running a
version-pinned `ruview call <tool> --read-only`, every token single-quoted;
read-only enforced locally and remotely; no mutations, credentialed reads,
or host hopping. MCP needs `remote-host` plus the remote tool's grant.
Also: device-access skill, doctor `devices`/`remote` groups, SDK
`devices.*`/`hosts.*` with types, generic `ruview call` verb, guidance
capability, 320 KiB package budget, CI smoke expects 22 tools.
Co-Authored-By: claude-flow <ruv@ruv.net>
Claude-Session: https://claude.ai/code/session_015H55jmprfz4oHWXSFbX5rf
@ruvnet/ruview 0.6.0 turns the harness into a complete npm operator
surface: one policy-checked tool registry behind the CLI, the MCP server,
and a new typed SDK.
- SDK (ADR-369): `@ruvnet/ruview/sdk` createRuView() with doctor,
firmware.{ports,plan,flash,monitor}, training.{plan,run,gate,calibrate},
kernel.{selfTest,load}, guidance/claimCheck/verify/spaces; strict mode
throws RuViewError; TypeScript declarations in src/sdk.d.ts.
- Firmware (ADR-370): cross-platform `python -m esptool` flashing replaces
the Windows-only stub. SHA256SUMS verification (mismatch always fatal),
bundle containment, variant/partition checks, argv-only command, chip_id
preflight that refuses a mismatched chip, boot-log capture;
hardwareValidated only when CSI callbacks appear without a panic.
Read-only ruview_firmware_plan / ruview_firmware_ports.
- Training (ADR-371): ruview_train / ruview_train_plan run pose-smoke,
pose (MM-Fi), or room training from the trusted checkout with in-repo
paths only, logs/checkpoints under v2/target/ruview-train, and libtorch
remedies. ruview_train_gate enforces mean-pose baseline, leakage-free
splits, subject/time disjointness, and evidence tagging.
- Doctor (ADR-372): structured pass/warn/fail/skip checks with remedies
across runtime, integrity, hosts, repo, Rust, Python/esptool, firmware
bundles, serial, sensing server, and the compute kernel; --json/--group;
hardware probe and network checks are CLI/SDK-only.
- Plan tools cannot take `confirm`; acting tools keep grant+confirm over
MCP. Policy files and TOOL_POLICY are drift-tested.
- Unpacked budget 160 KiB → 224 KiB in both npm workflows; CI tarball smoke
now checks the SDK and the training gate.
Co-Authored-By: claude-flow <ruv@ruv.net>
Claude-Session: https://claude.ai/code/session_015H55jmprfz4oHWXSFbX5rf
Adds a portable RuView compute kernel for JavaScript, built from the Rust
source of truth and wired into the @ruvnet/ruview metaharness.
Rust
- v2/crates/ruview-kernel: bounded single-function JSON ABI
(call(op, json) -> envelope) over the ADR-021 wifi-densepose-vitals
pipeline: streaming sessions, batch analyze, deterministic SplitMix64
synthetic CSI (SYNTHETIC), bounded session registry, strict input
validation (deny_unknown_fields, width/finite/magnitude checks, size and
count limits). wasm32-only zero-import C ABI (rvk_alloc/free/call).
- v2/crates/ruview-kernel-napi: napi-rs transport exposing only
abiVersion()/call(); standalone workspace (excluded from v2) so napi never
enters `cargo test --workspace`; panic=unwind + catch_unwind.
npm (harness/ruview-kernel, zero runtime deps)
- loadKernel({backend: wasm|napi|auto}); WASM default (no host authority),
napi never silently falls back, auto reports fallbackReason.
- SHA256SUMS integrity verification; mismatch is always fatal; loader
rejects any WASM module that imports host functions.
- Browser-safe ./wasm entry; CLI doctor/info/selftest/parity/synth/
analyze/bench; build.mjs builds artifacts from source (no shell).
- Unit, security, and e2e tests (CLI round trip, cross-backend parity).
Metaharness
- New read-only tool ruview_kernel_selftest / `ruview kernel`: imports the
fixed optional package, fails closed with kernel_not_installed; policy,
claims, MCP policy, guidance capability, and manifest updated.
CI: .github/workflows/ruview-kernel-npm.yml builds both transports on
Linux/macOS/Windows, requires napi in tests, runs parity, verifies
artifacts, packs, and runs the cross-package e2e. No publish step.
Co-Authored-By: claude-flow <ruv@ruv.net>
Claude-Session: https://claude.ai/code/session_015H55jmprfz4oHWXSFbX5rf
* feat(firmware): add the 16MB flash profile the C6 fleet runs on
The 4MB and display layouts have 1.875MB and 2MB OTA slots, sized for 4MB
and 8MB parts. A 16MB C6 (DevKitC-1 N16) has no layout in the tree at all,
so building for one meant hand-editing sdkconfig -- and a smaller table
written over a deployed 16MB node relocates NVS and destroys its
provisioning, which is why this belongs in the repo rather than in a
workstation's untracked sdkconfig.
Two 4MB OTA slots, plus a 64K coredump partition and an 8000K FAT volume
for on-node storage. Rollback is enabled so an OTA'd image that cannot
confirm itself is reverted by the bootloader.
Layered, not inherited: sdkconfig.defaults.esp32c6 keeps its 4MB layout so
the common 4MB devkit is never silently repartitioned.
Co-Authored-By: claude-flow <ruv@ruv.net>
Claude-Session: https://claude.ai/code/session_01PVWMiHQifoYXL7uL3bphrZ
* feat(firmware): persistent on-node log and coredump-to-flash
A remote fault currently leaves no post-mortem. main.c decodes the reset
reason at boot and logs it to the CONSOLE -- which is exactly what a power
cycle destroys, and a power cycle is how a wedged node gets recovered.
The flash was already provisioned for this and the features were simply off:
partitions_16mb.csv has reserved a 64K `coredump` partition and an 8000K
`storage` FAT volume since the 16MB layout was written, neither had ever been
mounted or written, and the build defaulted to CONFIG_ESP_COREDUMP_ENABLE_TO_NONE.
- node_log.c/h: a 128 B-record ring on the storage volume. Boot records
(reset reason + the previous session's final uptime + a health snapshot),
periodic health samples, and event records. Ordering is boot_id + uptime_s
because these boards have no RTC and nothing can be timestamped absolutely.
Counters are stored RAW and differenced at read time, so a cadence change
never invalidates old records. Retention, not wear, binds: 128 B every
300 s is ~208 days in 8 MB, and the write rate is bounded explicitly.
- ap_rssi_dbm, the association link from esp_wifi_sta_get_ap_info. The
adaptive controller's rssi_median_dbm is a CSI statistic, not the uplink,
so a node with a bad uplink currently shows no signal for it anywhere.
- CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH, complementary rather than a
substitute: a coredump catches a CRASH, the boot record catches a HANG
followed by a watchdog reset.
node_log_init failing is non-fatal by design -- the module disables itself
and every entry point becomes a no-op. A logging volume that will not mount
must never take the fleet down with it.
csi_collector gains two gate accessors. This build selects its frame gate at
compile time, so both return CSI_GATE_NOT_CONFIGURABLE rather than a
plausible number: the log keeps a field of fixed width and meaning either
way, and an explicit "not applicable" is stored instead of something a
reader would later reason from as a real setting.
Built with ESP-IDF v5.4 for esp32c6 using
defaults + .esp32c6 + .16mb. Verified from the resulting artifacts: 16MB
table with coredump and storage present, COREDUMP_ENABLE_TO_FLASH set,
rollback enabled, image 0x10abd0 bytes in a 4M slot. NOT flashed to hardware
from this branch -- the equivalent code was exercised on a node-3 pilot, but
that is not evidence for this build.
Co-Authored-By: claude-flow <ruv@ruv.net>
Claude-Session: https://claude.ai/code/session_01PVWMiHQifoYXL7uL3bphrZ
* docs(adr-362): reading the on-node log is on-demand, never streamed
The log engine lands with no consumer, so the access pattern was open. Records
the decision to pull a node's log only when a human asks -- after a hang or a
crash, or while troubleshooting that node -- and to keep nothing server-side.
The reasoning that decided it: the ring already survives a power cycle on the
node (~208 days of retention), so a server copy duplicates a durability
property that is already met; and airtime is this fleet's binding constraint,
measured at 91% consumed by two slow nodes, so a periodic drain across nine
boards would spend exactly the resource whose exhaustion you would open the
log to investigate. An instrument must not perturb what it measures.
Leaves the decode-where question open on purpose, with the argument for a raw
proxy stated: decoding server-side defines the record layout in both C and
Rust, and the pilot already paid once for a host/firmware disagreement about a
field's meaning.
Co-Authored-By: claude-flow <ruv@ruv.net>
Claude-Session: https://claude.ai/code/session_01PVWMiHQifoYXL7uL3bphrZ
---------
Co-authored-by: Joe <joe@GitDev.hedgehog>
Co-authored-by: claude-flow <ruv@ruv.net>
A-B-A capture from the overnight run, ten 30 s windows per arm: pairing
fraction rises 0.5668 -> 0.7287 (Welch t=13.26, p<0.0001) when the fleet is
filtered to one transmitter, but paired observations/s falls 44% because
tx/s falls 56%. Fraction was the wrong figure of merit; not adopted.
Firmware changes (persistent on-node log, live filter_mac, and the node-3
pilot fixes) that produced this capture are held back pending a port against
main's restructured firmware/main/ tree (config_api.c and ota_update.c are
gone there).
Claude-Session: https://claude.ai/code/session_01PVWMiHQifoYXL7uL3bphrZ
Co-authored-by: Joe <joe@GitDev.hedgehog>
Co-authored-by: claude-flow <ruv@ruv.net>
Records why device-free position kept failing here, measured rather than
argued, and the join key built in response. The implementing PRs land without
this and are harder to read for it.
**Phase is unusable on this hardware.** The bistatic tier needed a signed
per-link radial velocity, which requires the common-mode component of CSI
phase. Measured across three ESP32-C6 nodes over ~40,000 frames, the
frame-to-frame change in common-mode phase is statistically indistinguishable
from uniform random: resultant length R = 0.011-0.032 against a 0.000
reference, sd 1.78-1.81 against pi/sqrt(3) = 1.814, no lag-1 autocorrelation.
A second, unwrap-free estimator agreed.
The mechanism is packet-detection timing quantization. Common-mode phase is
-2*pi*f_c*tau, and one ADC sample of jitter at 20 MHz is about 758 rad -- some
120 full wraps, re-randomized every packet. Not calibratable. The bistatic tier
is default-off as a result.
**Amplitude works but had no parallax.** The three AP->node links leave a single
distant transmitter inside a 36.5 degree fan; scalar per-node energy weighting
closed with a clean negative result -- magnitude responds to proximity,
direction does not.
What follows from both: a position tier needs several transmitters seen from
several receivers, and fusing those requires knowing that two nodes observed
the SAME transmission. Arrival timestamps cannot say so -- the sink sees network
jitter, not capture time -- and the per-node sequence counter is private to each
node. Hence (tx_mac, rx_seq): the 802.11 sequence control field is assigned by
the transmitter and is identical at every receiver, so it names one
transmission without any coordination between receivers, no shared clock and no
negotiation.
Status is Proposed, deliberately. The measurement layer is implemented and
validated on hardware; localization is NOT built, and the ADR says so along
with the rest of its known limitations -- peer links are ~10x weaker than data
frames, three links is below the threshold for tomographic localization
regardless of quality, and no position tier consumes the link table.
References only ADR-018, ADR-060 and ADR-110, all already present here.
Co-Authored-By: claude-flow <ruv@ruv.net>
Claude-Session: https://claude.ai/code/session_01BHNNWbmKvxXrVaEDwXEBNo
ruv