RuView/firmware/esp32-csi-node/version.txt at dependabot/github_actions/actions/github-script-9.0.0 - RuView - Gitea: Git with a cup of tea

starred/RuView

0 Fork 0

mirror of https://github.com/ruvnet/RuView.git synced 2026-10-23 15:13:03 -05:00

Files

T

ruvandClaude Fable 5.1 a64e9e98fb fix(firmware): keep the C6 console RX alive and ship USB onboarding (0.8.12)

- mmwave_sensor: the default probe pins (UART1 TX=17/RX=18) put UART1 TX on
  GPIO17, which is U0RXD on the ESP32-C6. Console input was dead on every C6
  node even when no sensor was found, because uart_driver_delete() leaves the
  GPIO matrix routing in place. C6 now defaults to GPIO4/5 and any pin pair
  overlapping the console UART is refused.
- serial_onboarding_protocol: _POSIX_C_SOURCE for strtok_r under -std=c11
  -pedantic (host tests on glibc).
- main/CMakeLists: explicit led_strip REQUIRES so builds work with the
  component manager disabled (vendored components, offline builds).
- release_bins/c6-onboarding: 0.8.12 C6 images built with ESP-IDF v5.4.

Hardware-verified on an ESP32-C6 over cu.usbserial-3120 from the RuView Mac
app: flash -> RUVIEW_HELLO_V1 receipt -> RUVIEW_CONFIG_V1 -> node 3 live at
-34 dBm on the sensing server.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Rqz356q3Qz6sscTrpy5Jrv

2026-09-11 08:58:46 -04:00

2 lines

7 B

Plaintext

Raw Permalink Blame History

0.8.12