mirror of
https://github.com/ruvnet/RuView.git
synced 2026-10-22 22:52:34 -05:00
ruvandClaude Fable 5.1
a64e9e98fb
- mmwave_sensor: the default probe pins (UART1 TX=17/RX=18) put UART1 TX on GPIO17, which is U0RXD on the ESP32-C6. Console input was dead on every C6 node even when no sensor was found, because uart_driver_delete() leaves the GPIO matrix routing in place. C6 now defaults to GPIO4/5 and any pin pair overlapping the console UART is refused. - serial_onboarding_protocol: _POSIX_C_SOURCE for strtok_r under -std=c11 -pedantic (host tests on glibc). - main/CMakeLists: explicit led_strip REQUIRES so builds work with the component manager disabled (vendored components, offline builds). - release_bins/c6-onboarding: 0.8.12 C6 images built with ESP-IDF v5.4. Hardware-verified on an ESP32-C6 over cu.usbserial-3120 from the RuView Mac app: flash -> RUVIEW_HELLO_V1 receipt -> RUVIEW_CONFIG_V1 -> node 3 live at -34 dBm on the sensing server. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Rqz356q3Qz6sscTrpy5Jrv
2 lines
7 B
Plaintext
2 lines
7 B
Plaintext
0.8.12
|