From cfaa7e4ff9dac2a2d2e4f0396eaec34c163fa352 Mon Sep 17 00:00:00 2001 From: Oleksandr Shyshatskyi Date: Wed, 2 Sep 2026 13:54:58 +0300 Subject: [PATCH] Document OrcaSlicer Moonraker upload setup --- docs/known-issues.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/known-issues.md b/docs/known-issues.md index 29b55e1..6709bd8 100644 --- a/docs/known-issues.md +++ b/docs/known-issues.md @@ -6,10 +6,10 @@ Some OrcaSlicer profiles can upload a `.3mf` project rather than the sliced `.gcode` file. Reforge expects the G-code file for printing, so the job may not appear or start correctly in Mainsail. -In OrcaSlicer, open **Printer Settings** and uncheck: +In OrcaSlicer, open **Printer Settings**, change the upload protocol from +**FlashForge** to **Moonraker**, and uncheck: > Use 3MF instead of G-code -Slice the model again and upload the resulting `.gcode` file through Mainsail -or your Moonraker upload target. - +Slice the model again and upload the resulting `.gcode` file through the +Moonraker upload target.