# creator5-fw-builder — build configuration
# Edit paths to match your machine, then run `make build`.

# ---- identity of the package you are building -------------------------------
MOD_NAME=anvil                  # goes into the .tgz filename
MOD_VER=""                    # empty = today's UTC date, e.g. 20260823.
                              # Pin it to rebuild an old release, or for a
                              # second release on the same day (20260823b).

# ---- which printer is this for? --------------------------------------------
# Creator5Pro / 0029   or   Creator5 / 0028
# Find it on the printer: Settings -> About, or in
# /usr/data/firmwareRes/config/general.json ("machineName").
#
# This MUST match the model the stock package was built for. A package's
# runFirmwareExe.sh carries its own MACHINE=/PID= gate and refuses to install
# on the other model, so a Pro cannot be recovered or modded with a non-Pro
# package (and vice versa).
TARGET_MACHINE=Creator5Pro

# Override for one command:  MODEL=Creator5 make build
# Build both at once:        make release

# ---- inputs -----------------------------------------------------------------
# THERE ARE NO PATHS TO EDIT HERE ANY MORE. Every source this build reads is
# downloaded into vendor/ by bin/fetch-assets.sh, pinned by name and sha256 in
# versions.env -- the stock FlashForge OTA package included, which used to be
# the one file you had to go and find yourself. `make build` fetches what it
# needs; `make vendor` fetches the lot.
#
# The stock packages are ONE PER MODEL and not interchangeable: each carries a
# different firmwareExe and refuses to install on the other model. The one
# matching TARGET_MACHINE (or MODEL=) is selected automatically.
#
# Set one of these ONLY to build against firmware you downloaded yourself.
# Unlike HELIX_TGZ below, a path you put here is never checksummed and never
# overwritten -- it is 93MB you fetched by hand, and this build will not
# replace it with one you did not ask for. That also means nothing verifies it:
# it is your file and your problem.
#STOCK_TGZ_CREATOR5PRO="/path/to/Creator5Pro-1.9.7-1.2.9-20260810.tgz"
#STOCK_TGZ_CREATOR5="/path/to/Creator5-1.9.7-1.2.9-20260810.tgz"

# Set this only to force one specific package regardless of model. It does not
# suppress the download above; point the per-model variable at your file
# instead if that is what you want.
STOCK_TGZ=""

# KLIPPER_FORK USED TO BE HERE and pointed the build at a local checkout of
# the fork. It is gone: the Klipper build is pkg/klipper now, and a recipe
# names its source exactly once -- a checkout beside the pinned tarball is the
# second source that rule forbids, and the one that let a release ship a tree
# nobody had built. To build your own fork, put its tarball in vendor/ and
# re-pin KLIPPER_VERSION and KLIPPER_SHA256 in versions.env; the sha is then
# the same guarantee every other source in this repo carries.

# The toolchanger mod (klippy-extras + configs + helixscreen db entry) used to
# be a TOOLCHANGE= path to a creator5-toolchange checkout. It now lives in this
# repo under payload/klipper/, so there is nothing to set. BUILD_TOOLCHANGE=0
# here still turns it off.

# Mainsail, Fluidd, the HelixScreen build for the Creator 5 (MIPS static) and
# Moonraker are NOT set here. They are downloaded on demand into vendor/ by
# bin/fetch-assets.sh, pinned by version and sha256 in versions.env, so the
# repo carries no binaries. Set any of these ONLY to build against your own
# local copy.
# NOTE: the path is still checksummed against versions.env, and on a mismatch
# fetch-assets.sh OVERWRITES it with the pinned release -- SKIP does not save
# you, it re-downloads too. To build against your own file, also put ITS
# sha256 in versions.env; only an exact match is left alone ("cached"):
#HELIX_TGZ="/path/to/helixscreen-creator5-v0.99.118.tar.gz"
#MAINSAIL_ZIP="/path/to/mainsail.zip"
#FLUIDD_ZIP="/path/to/fluidd.zip"
#MOONRAKER_TGZ="/path/to/moonraker-v0.9.3.tar.gz"

# ---- optional extras -- leave empty to skip that feature ---------------------
# The ONE input with no pinned source, because it has no source at all: a
# busybox someone built elsewhere, for the applets FlashForge left out. Nothing
# needs it (the printer's own busybox works), so `make vendor` has nothing to
# fetch and an empty value simply leaves the package out of the feed. See
# pkgs/3rdparty/busybox/build.sh.
BUSYBOX_BIN=""

# The private key the package feed is signed with, or empty for an unsigned
# feed. A PATH, never a key: config.env is gitignored and this points outside
# the repo, so the key is never a thing the repository can leak.
#
#     ./bin/apk-keygen.sh ~/.anvil/anvil.rsa      makes the pair
#     APK_SIGN_KEY="/home/you/.anvil/anvil.rsa"
#
# EMPTY IS A WORKING CONFIGURATION, deliberately: `make packages` has to run on
# a bare checkout with no secrets, which is what keeps the packaging lane a
# gate in CI. An unsigned feed installs with --allow-untrusted, exactly as it
# does today; a signed one does not need the flag and refuses a package whose
# signature does not match. RSA or Ed25519 only -- ECDSA signatures are
# randomised and two builds of one tree would stop being byte-identical.
#
# The PUBLIC half is generated beside the private one and ships in anvil-core,
# so a printer can verify what it is offered. Losing the private key means
# printers stop accepting new packages until one is reflashed by .tgz.
#
# The DIRECTORY holding the key is bind-mounted read-only into the build
# container by the Makefile, which is what lets this point outside the
# checkout at all. Both halves must live in it, named as apk-keygen.sh leaves
# them, and it must be a path docker is allowed to mount.
#
# In CI the same value comes from a repository secret rather than from here:
# see the signing section of docs/notes/85-packaging.md.
APK_SIGN_KEY=""

# Where that feed is SERVED, and the URL every printer this build produces will
# ask for updates. It ships inside anvil-core as $MODDIR/etc/apk/repositories,
# so it is baked into the .tgz a printer installs and cannot be changed later
# except by installing an anvil-core that names somewhere else.
#
# LEAVE IT UNSET unless you are running your own feed. The default is
# Reforge's own host, and a printer only accepts packages signed with the key
# whose public half is in the same build -- so pointing a build at somebody
# else's URL produces a printer that fetches packages it will then refuse.
# Change this and APK_SIGN_KEY together or neither.
#
# The layout it names is what ./bin/publish-feed.sh writes:
#     $FEED_URL/<arch>/anvil.adb      the index
#     $FEED_URL/<arch>/<name>-<version>.apk
#FEED_URL="http://reforge.8941973.xyz/apk"

# ---- what the installed image does at boot ----------------------------------
# NOTHING, from here. There is no build-time knob for boot behaviour any more,
# and no runtime config file on the printer either: /usr/data/anvil/anvil.conf
# is gone. Every component that is installed runs, and the settings that used
# to live in that file -- the splash, the startup wait and its timeout, the
# first-boot import, the camera resolution, the nice values -- are now stated
# once each, in the service that uses them, under
# pkgs/anvil-core/payload/etc/s6-rc/source/.
#
# A printer that should not run a component does not have it: leave it out of
# the build with the BUILD_* flags, or `apk del` it on the printer. What
# there is no longer a way to ask for is a component that is installed and
# switched off -- a half-installed mod nobody chose on purpose, that everything
# downstream had to keep a second answer for.
#
# The BUILD_* flags that decide what goes INTO a package (BUILD_TOOLCHANGE,
# BUILD_MAINSAIL, BUILD_FLUIDD, BUILD_MOONRAKER, BUILD_HELIX) are not set
# here: bin/common.sh defaults them to the full firmware, and setting one in
# this file overrides that. Only touch them if you want a piece left out.

# ---- root login shipped in the image ---------------------------------------
# This is the whole "enable ssh" feature. The stock rootfs already runs
# dropbear from /etc/init.d/S50dropbear, so port 22 is ALREADY open on a
# stock printer -- there is simply no published root password.
#
# Empty = the INSTALLER picks a random password on the printer -- on the
# FIRST install only, updates keep the one the machine already has -- and
# writes it to anvil-password.txt on the USB stick you flashed from. Every
# machine gets a different one, which a hash baked into a shared package
# never could.
# Set one here to choose your own:   make passwd
# (it prompts, and runs inside the build image -- the same python everywhere,
# where a host openssl may lack `passwd -6` entirely)
ROOT_PW_HASH=""

# ---- crypto (from /usr/prog/bin/unTar on the printer) -----------------------
FF_KEY='FFP0331&*%root'

# ---- the printer replica -----------------------------------------------------
# Nothing here. The replica's settings -- the factory image, the partition
# sizes, a prebuilt printer image -- live in test.env, because they exist only
# for the tests and must never reach a printer:
#
#     cp test.env.example test.env