# creator5-fw-builder — build configuration
# Edit paths to match your machine, then run ./build.sh

# ---- identity of the package you are building -------------------------------
MOD_NAME=anvil                  # goes into the .tgz filename
MOD_VER=1.0.0                 # your mod version

# Version stamped on the software component. Empty = keep the stock number
# (recommended). The installer wipes every other version dir before renaming
# its temp dir, so a collision is not a problem; a suffix like 1.9.7-mod is
# only useful if you want to see at a glance that a machine is modded.
SW_VER=""

# ---- inputs (sources you already have on this machine) ----------------------
DESKTOP="$HOME/Desktop"

# Stock OTA package (encrypted). Used for start.img/end.img/play.
STOCK_TGZ="$DESKTOP/Creator5-1.9.7-1.2.9-20260810/Creator5-1.9.7-1.2.9-20260810"

# Extracted stock software component -- the BASE our overlay is applied onto.
STOCK_SOFTWARE="$DESKTOP/software-1.9.8.tar_2026-08-21_7045c47d__md5-8e12dbbd961f0821bd7895f902563238/software-1.9.8"

# Your Klipper fork (branch creator5) -- klippy tree + prebuilt MIPS c_helper.so
KLIPPER_FORK="$DESKTOP/klipper"

# Toolchanger mod repo (klippy-extras + configs + helixscreen db entry)
TOOLCHANGE="$DESKTOP/creator5-toolchange"

# HelixScreen release tarball for the Creator 5 (MIPS static)
HELIX_TGZ="$DESKTOP/helixscreen-creator5-v0.99.115.tar.gz"

# Optional extras -- leave empty to skip that feature
MAINSAIL_ZIP="$PWD/assets/mainsail.zip"                                  # scripts/fetch-mainsail.sh writes vendor/mainsail.zip
BUSYBOX_BIN="$DESKTOP/creator5/busybox"          # optional richer busybox

# ---- what the installed image does at boot (defaults baked into mod.conf) --
MOD_UI=stock                  # stock | helix   -- which UI owns the screen
MOD_KLIPPER=fork              # stock | fork    -- which klippy tree runs
MOD_WEB=1                     # 1 = start nginx (Mainsail) + moonraker
MOD_SSH=1                     # 1 = start dropbear on port 22
MOD_TOOLCHANGE=1              # 1 = install ff_* extras and configs

# ---- root login shipped in the image ---------------------------------------
# This is the whole "enable ssh" feature. The stock rootfs already runs
# dropbear from /etc/init.d/S50dropbear, so port 22 is ALREADY open on a
# stock printer -- there is simply no published root password.
#
# Empty = keep FlashForge's stock hash (nobody can log in).
# Generate one with:   openssl passwd -6 'yourpassword'
ROOT_PW_HASH=""

# ---- crypto (from /usr/prog/bin/unTar on the printer) -----------------------
FF_KEY='FFP0331&*%root'