mirror of
https://github.com/Klipper4FlashForge/firmware.git
synced 2026-10-21 12:52:16 -05:00
Oleksandr Shyshatskyi
80a4d64ffd
Add Fluidd and custom boot scripts, migrate DC24V control, update the web UIs and filament macros, improve startup status reporting, and expand upgrade and replica coverage.
187 lines
9.1 KiB
Bash
187 lines
9.1 KiB
Bash
ROOT="$(cd "$(dirname "${BASH_SOURCE[0]:-$0}")/.." && pwd)"
|
|
cd "$ROOT"
|
|
|
|
CONFIG_ENV="${CONFIG_ENV:-$ROOT/config.env}"
|
|
if [ ! -f "$CONFIG_ENV" ]; then
|
|
if [ -f config.env.example ]; then
|
|
echo "no config.env -- copy config.env.example and edit the paths:" >&2
|
|
echo " cp config.env.example config.env" >&2
|
|
fi
|
|
exit 1
|
|
fi
|
|
# shellcheck disable=SC1090
|
|
. "$CONFIG_ENV"
|
|
|
|
BUILD_TOOLCHANGE="${BUILD_TOOLCHANGE:-1}"
|
|
BUILD_MAINSAIL="${BUILD_MAINSAIL:-1}"
|
|
BUILD_FLUIDD="${BUILD_FLUIDD:-1}"
|
|
BUILD_MOONRAKER="${BUILD_MOONRAKER:-1}"
|
|
BUILD_HELIX="${BUILD_HELIX:-1}"
|
|
|
|
# A --prefix root on the DATA partition, so a FlashForge OTA cannot delete it.
|
|
# s6 and CPython are configured with this path, so moving it rebuilds them.
|
|
MODDIR="${MODDIR:-/usr/data/anvil}"
|
|
|
|
# Two names because a package's ./usr/data/anvil/... paths are unpacked relative
|
|
# to the root the installer is given: the payload sits $MODDIR deep inside
|
|
# PAYLOAD_ROOT.
|
|
PAYLOAD_ROOT="${PAYLOAD_ROOT:-$ROOT/work/modpayload-root}"
|
|
PAYLOAD_DIR="${PAYLOAD_DIR:-$PAYLOAD_ROOT$MODDIR}"
|
|
export PAYLOAD_ROOT PAYLOAD_DIR
|
|
|
|
PY_HOST="${PY_HOST:-mips-linux-gnu}"
|
|
PY_TOOLCHAIN_DIR="${PY_TOOLCHAIN_DIR:-work/.mips-toolchain/mips-gcc720-glibc229}"
|
|
|
|
# Deliberately not an OpenWrt or Alpine name: mipsel_24kc and mipsel are musl,
|
|
# so such a package would satisfy a dependency here, install cleanly and fail
|
|
# against glibc 2.29. An unknown name gets it refused on architecture instead
|
|
# -- apk checks it against etc/apk/arch, which --initdb writes once.
|
|
IPK_ARCH="${IPK_ARCH:-mipsel_xburst2}"
|
|
export MODDIR PY_HOST PY_TOOLCHAIN_DIR IPK_ARCH
|
|
|
|
# Downloaded on demand, pinned in versions.env. An explicit override path is
|
|
# checksummed too and replaced when the hash differs -- put its own sha256 there.
|
|
# shellcheck disable=SC1091
|
|
[ -f "$ROOT/versions.env" ] && . "$ROOT/versions.env"
|
|
MAINSAIL_ZIP="${MAINSAIL_ZIP:-$ROOT/vendor/mainsail-${MAINSAIL_VERSION:-unpinned}.zip}"
|
|
FLUIDD_ZIP="${FLUIDD_ZIP:-$ROOT/vendor/fluidd-${FLUIDD_VERSION:-unpinned}.zip}"
|
|
HELIX_TGZ="${HELIX_TGZ:-$ROOT/vendor/${HELIX_FILE:-helixscreen.tar.gz}}"
|
|
MOONRAKER_TGZ="${MOONRAKER_TGZ:-$ROOT/vendor/moonraker-${MOONRAKER_VERSION:-unpinned}.tar.gz}"
|
|
TIMELAPSE_TGZ="${TIMELAPSE_TGZ:-$ROOT/vendor/moonraker-timelapse-${TIMELAPSE_VERSION:-unpinned}.tar.gz}"
|
|
X264_TGZ="${X264_TGZ:-$ROOT/vendor/x264-${X264_VERSION:-unpinned}.tar.bz2}"
|
|
FFMPEG_TGZ="${FFMPEG_TGZ:-$ROOT/vendor/ffmpeg-${FFMPEG_VERSION:-unpinned}.tar.xz}"
|
|
KLIPPER_TGZ="${KLIPPER_TGZ:-$ROOT/vendor/klipper-${KLIPPER_VERSION:-unpinned}.tar.gz}"
|
|
MIPS_TOOLCHAIN_TGZ="${MIPS_TOOLCHAIN_TGZ:-$ROOT/vendor/${MIPS_TOOLCHAIN_FILE:-mips-toolchain.tar.gz}}"
|
|
SKALIBS_TGZ="${SKALIBS_TGZ:-$ROOT/vendor/skalibs-${SKALIBS_VERSION:-unpinned}.tar.gz}"
|
|
S6_TGZ="${S6_TGZ:-$ROOT/vendor/s6-${S6_VERSION:-unpinned}.tar.gz}"
|
|
EXECLINE_TGZ="${EXECLINE_TGZ:-$ROOT/vendor/execline-${EXECLINE_VERSION:-unpinned}.tar.gz}"
|
|
S6RC_TGZ="${S6RC_TGZ:-$ROOT/vendor/s6-rc-${S6RC_VERSION:-unpinned}.tar.gz}"
|
|
|
|
export MAINSAIL_ZIP FLUIDD_ZIP HELIX_TGZ MOONRAKER_TGZ KLIPPER_TGZ MIPS_TOOLCHAIN_TGZ
|
|
export SKALIBS_TGZ S6_TGZ EXECLINE_TGZ S6RC_TGZ
|
|
export TIMELAPSE_TGZ X264_TGZ FFMPEG_TGZ
|
|
|
|
# Built with the GLIBC toolchain above: a musl-linked interpreter cannot dlopen
|
|
# a glibc c_helper.so, and dlopen is how klippy loads it.
|
|
PY_TGZ="${PY_TGZ:-$ROOT/vendor/Python-${PY_VERSION:-unpinned}.tgz}"
|
|
OPENSSL_TGZ="${OPENSSL_TGZ:-$ROOT/vendor/openssl-${OPENSSL_VERSION:-unpinned}.tar.gz}"
|
|
SQLITE_TGZ="${SQLITE_TGZ:-$ROOT/vendor/sqlite-autoconf-${SQLITE_VERSION:-unpinned}.tar.gz}"
|
|
ZLIB_TGZ="${ZLIB_TGZ:-$ROOT/vendor/zlib-${ZLIB_VERSION:-unpinned}.tar.gz}"
|
|
LIBFFI_TGZ="${LIBFFI_TGZ:-$ROOT/vendor/libffi-${LIBFFI_VERSION:-unpinned}.tar.gz}"
|
|
XZ_TGZ="${XZ_TGZ:-$ROOT/vendor/xz-${XZ_VERSION:-unpinned}.tar.gz}"
|
|
BZIP2_TGZ="${BZIP2_TGZ:-$ROOT/vendor/bzip2-${BZIP2_VERSION:-unpinned}.tar.gz}"
|
|
EXPAT_TGZ="${EXPAT_TGZ:-$ROOT/vendor/expat-${EXPAT_VERSION:-unpinned}.tar.gz}"
|
|
|
|
# Spelled out rather than derived from PY_VERSION so a 3.14 bump is deliberate.
|
|
PY_MM="${PY_MM:-3.13}"
|
|
export PY_MM
|
|
|
|
export PY_TGZ OPENSSL_TGZ SQLITE_TGZ ZLIB_TGZ LIBFFI_TGZ XZ_TGZ BZIP2_TGZ
|
|
export EXPAT_TGZ
|
|
|
|
# pypkg_var maps a PYPKG_LIST entry plus a suffix to the variable versions.env
|
|
# spells for it (streaming-form-data -> PYPKG_STREAMING_FORM_DATA_FILE), by bash
|
|
# indirection -- which is why this file is never sourced by payload/*'s ash.
|
|
pypkg_var() {
|
|
local _n _v
|
|
_n=$(printf '%s' "$1" | tr 'a-z' 'A-Z' | tr '-' '_')
|
|
_v="PYPKG_${_n}_$2"
|
|
printf '%s' "${!_v-}"
|
|
}
|
|
# The sdist as bin/fetch-assets.sh leaves it in vendor/.
|
|
pypkg_tgz() { printf '%s/vendor/%s' "$ROOT" "$(pypkg_var "$1" FILE)"; }
|
|
# Version taken from the pinned file name, after the LAST dash -- which is what
|
|
# makes importlib_metadata-8.7.0 and dbus_fast-5.0.22 both come out right.
|
|
pypkg_version() {
|
|
local _f
|
|
_f="$(pypkg_var "$1" FILE)"
|
|
_f=${_f%.tar.gz}; _f=${_f%.tgz}; _f=${_f%.zip}
|
|
printf '%s' "${_f##*-}"
|
|
}
|
|
# ZLIB_TGZ is pinned above for CPython; pkgs/3rdparty/zlib builds it once for all.
|
|
SODIUM_TGZ="${SODIUM_TGZ:-$ROOT/vendor/libsodium-${SODIUM_VERSION:-unpinned}.tar.gz}"
|
|
SNTPD_TGZ="${SNTPD_TGZ:-$ROOT/vendor/sntpd-${SNTPD_VERSION:-unpinned}.tar.gz}"
|
|
export SODIUM_TGZ SNTPD_TGZ
|
|
|
|
# Output paths are derived by pkgs/lib.sh's pkg_out; these three aliases remain
|
|
# only because payload.sh and fetch-assets.sh name them. Add nothing here.
|
|
SODIUM_BUILD="${SODIUM_BUILD:-$ROOT/work/pkg/libsodium}"
|
|
ZLIB_BUILD="${ZLIB_BUILD:-$ROOT/work/pkg/zlib}"
|
|
export SODIUM_BUILD ZLIB_BUILD
|
|
|
|
PKG_FEED="${PKG_FEED:-$ROOT/work/packages}"
|
|
|
|
# The feed's file extension and index name. Constants rather than a switch:
|
|
# there is one format. They stay named because four things spell them --
|
|
# bin/payload.sh, bin/build-payload.py, the prune and the index step -- and a
|
|
# literal in four places is how the last format change went wrong.
|
|
#
|
|
# THE INDEX NAME ENDS .adb ON PURPOSE. apk decides how to read a repository
|
|
# from how the entry is spelled: a path ending .adb is a v3 index read in
|
|
# place, with the packages as its siblings. A bare directory would send it
|
|
# looking for <dir>/<arch>/Packages.adb and an arch subdirectory instead.
|
|
PKG_EXT=apk
|
|
PKG_INDEX_NAME=anvil.adb
|
|
export PKG_FEED PKG_EXT PKG_INDEX_NAME
|
|
|
|
# WHERE THAT FEED IS SERVED, and the one line a printer needs to upgrade over
|
|
# the network. $MODDIR/etc/apk/repositories ships in anvil-core carrying
|
|
# "$FEED_URL/$IPK_ARCH/$PKG_INDEX_NAME", so a machine installed today already
|
|
# points at the host, and `apk upgrade` starts working the day the host does
|
|
# without a .tgz having to reach the printer first.
|
|
#
|
|
# THE ARCH IS A DIRECTORY, NOT A SUFFIX. Package file names are
|
|
# <name>-<version>.apk with no architecture in them, so two architectures in
|
|
# one directory would be two files with one name. One directory each is what
|
|
# keeps a second machine from needing a second URL.
|
|
#
|
|
# A SETTING RATHER THAN A LITERAL, so a fork serves its own feed by editing
|
|
# config.env rather than a file that ships. It pairs with APK_SIGN_KEY: the
|
|
# URL says where packages come from and the key says whose they are, and a
|
|
# fork that changes one without the other has a feed its printers refuse.
|
|
FEED_URL="${FEED_URL:-http://reforge.8941973.xyz/apk}"
|
|
export FEED_URL
|
|
|
|
# apk-tools: pinned by COMMIT and cloned rather than downloaded, because GitLab
|
|
# regenerates tag archives so their sha256 is not a pin.
|
|
APK_TOOLS_DIR="${APK_TOOLS_DIR:-$ROOT/vendor/apk-tools}"
|
|
APK_TOOLS_BUILD="${APK_TOOLS_BUILD:-$ROOT/work/pkg/apk-tools}"
|
|
|
|
# The NATIVE apk, built by tools/apk-host/build.sh from that same checkout. It
|
|
# is the packager -- `apk mkpkg` and `apk mkndx` run here, on x86-64 -- and it
|
|
# is deliberately not the printer's binary: that one carries prefix.patch and
|
|
# defaults its database to $MODDIR, which is wrong for a build machine.
|
|
APK_HOST_DIR="${APK_HOST_DIR:-$ROOT/work/host}"
|
|
APK_BIN="${APK_BIN:-$APK_HOST_DIR/bin/apk}"
|
|
export APK_TOOLS_DIR APK_TOOLS_BUILD APK_HOST_DIR APK_BIN
|
|
|
|
TEST_ENV="${TEST_ENV:-$ROOT/test.env}"
|
|
# shellcheck disable=SC1090
|
|
[ -f "$TEST_ENV" ] && . "$TEST_ENV"
|
|
|
|
# The release date, and only ever in the outer filename. Set MOD_VER to pin it.
|
|
MOD_VER="${MOD_VER:-$(date -u +%Y%m%d)}"
|
|
export MOD_VER
|
|
|
|
# The stock packages are downloads like everything else in vendor/, pinned by
|
|
# name and sha256 in versions.env. Set either variable in config.env to build
|
|
# against firmware you downloaded yourself; leave it and fetch-assets.sh puts
|
|
# the pinned one here. STOCK_FILE_* is defaulted so a checkout with no
|
|
# versions.env names a missing file rather than the vendor DIRECTORY.
|
|
STOCK_TGZ_CREATOR5PRO="${STOCK_TGZ_CREATOR5PRO:-$ROOT/vendor/${STOCK_FILE_CREATOR5PRO:-Creator5Pro-unpinned.tgz}}"
|
|
STOCK_TGZ_CREATOR5="${STOCK_TGZ_CREATOR5:-$ROOT/vendor/${STOCK_FILE_CREATOR5:-Creator5-unpinned.tgz}}"
|
|
|
|
# Each stock package carries its own firmwareExe and refuses the other model.
|
|
TARGET_MACHINE="${MODEL:-${TARGET_MACHINE:-Creator5Pro}}"
|
|
case "$TARGET_MACHINE" in
|
|
Creator5Pro) TARGET_PID=0029; _stock="${STOCK_TGZ_CREATOR5PRO:-}" ;;
|
|
Creator5) TARGET_PID=0028; _stock="${STOCK_TGZ_CREATOR5:-}" ;;
|
|
*) echo "TARGET_MACHINE must be Creator5 or Creator5Pro (got '$TARGET_MACHINE')" >&2; exit 1 ;;
|
|
esac
|
|
if [ -z "${STOCK_TGZ:-}" ] && [ -n "$_stock" ]; then
|
|
STOCK_TGZ="$_stock"
|
|
fi
|
|
|
|
export TARGET_MACHINE TARGET_PID STOCK_TGZ
|
|
export STOCK_TGZ_CREATOR5PRO STOCK_TGZ_CREATOR5
|