Oleksandr ShyshatskyiandClaude Sonnet 5.5 df57d2795e Remove the shared-stepper adapter ...

ff_extruder.py was taken from #29 but never enabled. The fork already accepts
the four [extruderN] sections' repeated pins through duplicate_pin_override,
each extruder keeps its own stepper and pressure advance, and no failure on
a stock config has been shown. It can come back if one is.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

2026-10-03 18:07:59 +03:00

..

3rdparty

Prepare next firmware release

2026-09-24 11:37:28 +03:00

anvil-core

Prepare next firmware release

2026-09-24 11:37:28 +03:00

helixscreen

Pin HelixScreen v0.99.118 for Creator 5

2026-09-11 14:25:23 +03:00

klipper

Remove the shared-stepper adapter

2026-10-03 18:07:59 +03:00

klipper-config

Add optional Z-hop and in-dock retract to the return after a tool change

2026-10-03 17:30:49 +03:00

moonraker

Version the pinned recipes on the release, not on memory (#21)

2026-09-08 20:56:59 +03:00

timelapse

Keep the config in a directory of our own (#16)

2026-09-08 10:05:36 +03:00

lib.sh

Version the pinned recipes on the release, not on memory (#21)

2026-09-08 20:56:59 +03:00