Oleksandr ShyshatskyiandClaude Sonnet 5.5 df57d2795e Remove the shared-stepper adapter ...

ff_extruder.py was taken from #29 but never enabled. The fork already accepts
the four [extruderN] sections' repeated pins through duplicate_pin_override,
each extruder keeps its own stepper and pressure advance, and no failure on
a stock config has been shown. It can come back if one is.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

2026-10-03 18:07:59 +03:00

..

lib

The stock firmware is a pinned download like everything else

2026-08-30 16:01:47 +03:00

replica

Prepare next firmware release

2026-09-24 11:37:28 +03:00

static

Remove the shared-stepper adapter

2026-10-03 18:07:59 +03:00

conftest.py

Replace opkg with apk, and sign the feed

2026-08-31 14:32:07 +03:00