mirror of
https://github.com/Klipper4FlashForge/firmware.git
synced 2026-10-21 12:52:16 -05:00
Oleksandr ShyshatskyiandClaude Opus 5
b55461cd6b
EXCLUDE_OBJECT installs the ExcludeObject move transform, and inside a cancelled object _ignore_move updates Python state without ever calling next_transform.move(). Nothing reaches the toolhead, so the lookahead buffer that normally blocks gcode.run_script never fills, and virtual_sdcard.work_handler runs on its own yields alone -- one reactor.pause per 8192-byte read, about 330 lines apart. The eboard's soft-PWM refresh misses its deadline and the MCU shuts down with "Timer too close". Measured on a Creator 5 Pro: 37 s from "Excluding object" to the shutdown, with 1 Hz status queries answered in 1.30-1.78 s throughout while the main MCU sat at mcu_awake=0.000 and gcodein=0. EXCLUDE_OBJECT_DEFINE is not the cost. The line costs 115 ms through the live klippy and nothing thereafter; three prints of the same file without a cancel complete with bytes_retransmit=0. Removing it removes the object there is to cancel, not the work. tools/gcode-bench holds the harnesses, including the shlex fast path that takes that DEFINE from 91.6 ms to 5.9 ms on the printer -- worth having for large plates, but not this bug. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01AVUMfbNuKUWWV32PBcydwb