firmware/docs/testing.md

Testing: how we know it does not brick

qa/ is the suite. One framework (pytest), two lanes, and a result per assertion rather than per case script.

make qa            # both lanes
make qa-static     # seconds, any machine, any clone -- no docker
make qa-replica    # the gates that decide whether a package bricks a printer

Selection is pytest's: -k nginx, -m static, or a single test id. qa-migration.md is the design and the history.

The lanes

Lane	Needs	What it asks
static	the checkout; the feed for part of it	every shipped script parses and is free of bashisms, every name resolves, the recipe layout holds, and -- when work/packages exists -- the .ipks are what we mean to ship
replica	docker + qemu + the firmware	what the printer does -- on a machine the real app_startup.sh installed the real package onto

The replica lane needs a built package in work/out/*.tgz (make build) and PRINTER_IMAGE in test.env — that image is the replica, and there is no other way to get one. test.env.example carries the published tag; make printer-image builds your own from public firmware. The install is baked into an image once per package, keyed on the package's md5, so rebuilding gets you a fresh bake and not yesterday's.

The static lane is worth running twice, and CI does. A good part of it asks what is inside the .ipk files, and those questions do not fail on a checkout that has no feed — they return quietly, and the lane reports a pass having never opened a package. Run it once for the fast parse-and-name feedback, then again after make packages, when the rest of it can bite.

The replica lane, module by module

module	asks
test_install.py	what the machine's own installer produced: the stock boot chain is untouched and still parses, the wrapper is installed and starts the supervisor, every installed script is sh -n-clean under the printer's own busybox, klipper and the UI are services in the compiled database, klipper depends on the bring-up, the config include set is wired up, the user's printer.cfg survived, and a boot with no stick does not go looking for an update
test_abi.py	the ABI gate, and the only one there is: every ELF object on the installed filesystem -- ours, the stock tree's and whatever bin/payload.sh staged -- is 32-bit little-endian MIPS, and every one the kernel's loader will handle is nan2008/o32/mips32r2. Two exemptions, both measured and both narrow: kernel modules are ET_REL and have no FP ABI to agree about, and FlashForge ships one inert ARM binary
test_upgrade.py	an update replaces the whole of /usr/data/anvil -- a renamed file leaves no stale twin, and a file nobody shipped goes too -- while HelixScreen's settings are carried across it and /usr/data/config, where printer.cfg and moonraker-custom.conf live, is never touched
test_supervisor.py	the s6 we cross-compiled: all 13 binaries load on the printer's kernel, and s6-svwait -U really waits for readiness rather than returning on the fork
test_boot_screen.py	the first-boot screen renders on our own CPython 3.13, one screen's worth of correctly packed bytes, and degrades to "no screen" rather than raising when there is no panel
test_web.py	nginx and moonraker come up under s6, nginx comes back from a kill and stays down after a stop, and moonraker serves on :7125 on our interpreter
test_s6rc.py	the boot itself -- the scanner answers, s6-rc-init lays the scandir down, a killed daemon comes back
test_mcu_bringup.py	ff_mcu_bringup.py runs on FF_PYTHON in the shipped environment and names every port it could not open

Eight of test_s6rc.py's twelve cannot pass on a replica, and that is hardware, not a bug: there are no /dev/ttyS4,5,7 and no /dev/video*, so klippy never connects, camera times out, and the ok-all bundle is unreachable. See qa-migration.md. Everything else is green.

test/ is gone

test/run-tests.py went first, and make test with it. The 28 host-side unit tests that outlived it -- test_startup.py, test_tool_transform.py, test_ffscreen.py, test_chamber.py, test_gcode.py and the two fixtures they shared -- are deleted too, along with make test-py and the CI step that ran them. qa/ is the only suite.

What this costs is worth naming rather than leaving to be discovered. The replica lane covers the boot screen on the real interpreter (qa/replica/test_boot_screen.py) and the install end to end, but nothing now checks the tool-frame arithmetic in ff_toolchange, the chamber macros' per-model branching, the stamp discipline in ff-startup.py, or the verification G-code against the macros we ship. Those were host-side unit tests over our own Python, and they have no replacement.

The replica is a tool, not a test

tools/replica/ builds the machine both suites run against, and the build uses it too -- bin/payload.sh assembles the payload by running the printer's own opkg inside it. It is not under test/ because nothing in it is a test:

tools/replica/
  printer/                  the replica itself: the Dockerfile, binfmt.sh,
                            assemble.sh, entrypoint.sh, seed-prog.sh, bake.sh
  ffsim/                    the host half -- config loading and the docker
                            plumbing. NOT a test framework; it was one, and
                            what is left of it launches containers
  build-printer-image.sh    bakes the replica image -- fetches the firmware
                            itself, so it needs no stock package on disk
  sim-boot-screen.py        `make boot-screen-sim`

qa/lib/replica.py drives tools/replica/printer/ unmodified; it holds a container open where ffsim runs one case script and exits.

Why the harness is Python

The host half of the harness — the orchestrator and the replica launchers — was shell until August 2026. It moved to Python for one specific reason, and it is worth stating because the rule it enforces is the one above.

In the shell suite, "this gate did not run" travelled between processes as the string SKIP: on stdout, and the runner decided by grepping for it:

if "$@" >"$out" 2>&1; then
    if grep -qE '^[[:space:]]*SKIP:|[0-9]+ skipped' "$out"
    then skip "$name"; else pass "$name"; fi

Text on stdout cannot tell you what happened inside a process. A launcher that had already failed would reach the same line by a different road: the file that sources config.env failed to load, so STOCK_TGZ_* was never set, so the launcher concluded there was nothing to test, printed those five characters and exited 0 — on a machine with docker and the firmware sitting right there. That is not a hypothetical; it is how five broken launchers shipped and stayed broken.

What changed:

• A skip is an exception (ffsim.Skip), not a string. Output cannot imitate it, and a gate that fails cannot accidentally claim it was skipped.
• The repo root is found by searching upward for bin/common.sh, not by counting .. from $0. Moving a launcher to a different depth used to break it silently; now it cannot.
• A broken config is not an absent one. Sourcing a file with a syntax error returns non-zero and does not stop the shell, so the old code carried on with half a config. ffsim.config checks each source and names the file that failed.
• pytest results are read from JUnit XML, not from grepping N skipped.
• The suite calls the gates as functions. There is no subprocess between a gate and the thing counting results, so there is no format to agree on.

The four things that used to be reported as skips and are now failures: a config.env that does not parse, a missing case script, a missing package, and a missing baseline. A genuinely absent precondition — no docker, no stock package — is still a skip, because that is still the truth.

Speed

Almost all of a replica run used to be setup, repeated per test case:

	per run
unpack the 182MB factory image into /usr/prog	22s
install the stock package into it, under qemu	37s
the test itself (three boots, install, re-install)	~30s

make printer-image does both of those once, at build time, and publishes the result. tools/replica/printer/bake.sh is the part that cannot be a docker build step — the stock install needs binfmt_misc and chroot, so it runs in a privileged container and the result is committed. The md5 of the package that was installed is recorded in /usr/prog/.BASELINE; entrypoint.sh reinstalls only if a run asks for a different one.

A replica now starts in 0.7s and the whole end-to-end update test takes ~70s. That image contains proprietary FlashForge firmware.

There used to be a second way in, and it is where the numbers in that table came from: make rootfs unsquashed rootfs.squashfs out of a stock package into work/rootfs, and a thin container mounted it and unpacked the factory image for /usr/prog on every single case. It is gone. Every caller set PRINTER_IMAGE anyway — CI extracted a rootfs on every push and read none of it — and make printer-image builds the image from the same public firmware without needing a stock package at all, so the slow path was a second route to the same machine that nothing chose. When the image goes stale, rebuild it.

What takes the time now is real work: two full package builds (the payload is 55MB through xz) and two replica runs. If it needs to get faster again, that is where to look — not in the harness.

What was dropped, and why

Tests that cannot fail are worse than no tests, because they read as coverage:

• test-abi's execution half. It was qemu "$f" -h || [ $? -lt 126 ], which accepts nearly every exit status — it could only fail if qemu itself was missing. Running the binaries for real is what the replica does.

• test-ash's md5sum -s probe. It printed "inconclusive" on every path and could not fail.

• The per-file sh -n "POSIX" loop in run-tests.sh. sh is bash on the build image, so it proved nothing that test-ash does not prove properly with the printer's own busybox. Its bashism grep also flagged local, which busybox ash supports.

• test-install's hand-written replay of app_startup.sh. It re-derived the glob, MACHINE and PID with sed and then called the installer itself — so a mistake in our reading of the boot script could never be caught. The replica now runs the boot script itself, and qa/replica/test_install.py asserts against what it produced.

• The release workflow's final sim-install loop ignored the exit status of every run, so the last gate before publishing could not fail. It stops on the first failure now, and it is REAL_PKG=<pkg> pytest ./qa/replica per model -- 22 named results for each package that ships, where the loop gave one exit code it was throwing away.

• test-printer-db, all of it. It began as a re-implementation of PrinterDetector's scoring formula, mirroring printer_detector.cpp line for line, so a change to the HelixScreen fork's formula left the test passing while reality moved. Narrowing it to scoring-independent invariants kept it honest but not useful enough to earn its place, and the whole check is gone.

• The hand-rolled bashism grep in run-tests.sh. It knew five constructs; shellcheck -s dash knows the whole SC3xxx family and now stands in its place. The same pass gave every replica launcher one shared home for the docker plumbing — now tools/replica/ffsim/replica.py — which also fixed two make test-ash bugs: it ran without the docker socket (so it always silently skipped), and it never read test.env, so it ignored PRINTER_IMAGE and rebuilt the local sim image every run.

• Eight checks, in one pass, once each had been read properly. The suite had grown to twelve gates and most of them were the weaker copy of a gate that survives:

  • test-abi had never asserted anything in CI. run-tests.sh deleted work/modpayload immediately before it ran and CI set KLIPPER_FORK="", so it had no targets on any run, skipped, exited 0 and was printed as ok. qa/replica/test_abi.py now reads the ELF header of every object that actually landed, which is the check test-abi was aiming at.
  • test-macros used jinja2.Environment() — the default {{ }} syntax. The configs contain no {{ at all, only single-brace expressions, so it validated {% %} block structure and never once looked inside an expression. test_default_delimiters_are_blind now pins that.
  • test-ash-conformance parsed the payload with the printer's busybox; qa/replica/test_install.py runs sh -n over every installed script with the same qemu'd busybox.
  • test-model-gate checked what bin/verify.sh §8b/§9 checked and what pack.sh already refuses to build. Its header claimed it proved the two models ship different files; no such check existed in it. verify.sh has since been retired; the model gate is now enforced where it always mattered, by runFirmwareExe.sh refusing a foreign package -- which the replica lane exercises on every install.
  • test-base-cfg compared our printer.base.cfg against work/software/.../printer.base.cfg — which the build overwrote with our own file before the test read it. It had been diffing our file against itself: green on a cold tree, red on a second build, and blind to real drift either way. The comparison moved into bin/unpack.sh, where a pristine stock tree actually exists.
  • test-applets' command-word scan only extracted the first word of a simple, unprefixed command: if timeout 5 foo; then yielded ['if','echo','fi'], so the one failure its docstring named was invisible to it. Its allowlist had drifted to nine entries that excused nothing. The absolute-path half survives, because S50wifi's binaries sit on a branch no simulation reaches.
  • lint-danger's structural greps were satisfiable by comments — the comments in firmwareExe and S80ui mention helix and (at the time) SAFE-MODE, so the checks passed with the logic deleted.
  • case-ui went with the helix-only decision.

Bugs these caught

Not theoretical. Writing them caught real bugs before any hardware was involved:

• backups were taken after the stock run.sh had already overwritten the files, so a restore would have restored the modified versions
• rm -rf $MODDIR/bin with an unset MODDIR expands to rm -rf /bin
• a crashed UI is a zombie, and kill -0 succeeds on a zombie — the crash detector called a dead UI healthy
• the packer emitted both models' filenames from one build, which would have handed a Creator 5 the Pro's firmware
• three checks in the brick lint had been quietly dead for months: two were guarded on a payload/boot.sh that no longer existed, and the file glob never matched firmwareExe or the init.d/S* scripts at all
• a skip counted as a pass for the whole life of the suite, which is how test-abi sat in it for months checking nothing while printing green