firmware/tools/python

A Python for the Creator 5 Pro that has sqlite3

An adoption, not an investigation -- but it started as one, and this is what the investigation measured. It answers one question: can we put an interpreter on this printer that is not FlashForge's, and does it have the module whose absence has been shaping this repo's decisions for two releases?

Everything below was measured on the printer replica (real rootfs.squashfs under qemu-mipsel) or read out of the objects with readelf, not off a project page. build.sh beside this file rebuilds the whole thing in a throwaway container and is where the numbers came from; bin/patch.sh section 5c is the same build wired into the real build lane, and test/integration/printer/case-python.sh is the gate that proves the result works on the printer's own kernel.

Why: one missing module, two releases of consequences

FlashForge built /usr/prog/Python-3.8.2 without _sqlite3, and shipped no libsqlite3 anywhere on the rootfs. Measured on the replica, with the library path the interpreter needs to start at all:

ModuleNotFoundError: No module named '_sqlite3'

That single omission is why MOONRAKER_VERSION in versions.env is a 2023 commit rather than a release: every Moonraker from v0.9.0 onward keeps its database in sqlite, and v0.9.0 is where it moved off lmdb. The pin is the last commit that still uses lmdb and has the webcam fix Mainsail needs. No release has both. That is not a Moonraker problem; it is this problem, seen from downstream.

The alternatives were: build a _sqlite3 for 3.8.2 (a module against an interpreter we did not build, whose ABI we would be guessing at), or build a whole interpreter. A from-source cross-build costs the same either way, so it is a whole interpreter -- and a current one, which also ends 3.8's end-of-life status as a thing anyone has to think about.

What it is

CPython 3.13.7, --disable-shared, cross-compiled with the repo's pinned Ingenic gcc 7.2 / glibc 2.29 toolchain, against seven static C libraries built alongside it (OpenSSL 3.0.15, sqlite 3.46.1, zlib 1.3.1, libffi 3.4.6, xz 5.4.7, bzip2 1.0.8, expat 2.6.4). Everything is pinned by sha256 in versions.env.

lib-dynload comes to 60 extension modules, including the ones this printer could never have had: _sqlite3, _ssl, _hashlib, _ctypes, _lzma, _bz2, zlib, pyexpat, _asyncio, _decimal, _multiprocessing.

The ABI, which is the whole game

The printer's kernel loads little-endian, NAN2008, o32, mips32r2 and nothing else. It refuses everything else with ENOEXEC -- "cannot execute binary file" -- and explains nothing.

e_flags = 0x70001405   an EXECUTABLE
e_flags = 0x70001407   a SHARED OBJECT -- 0x2 more, EF_MIPS_PIC
loader  = /lib/ld-linux-mipsn8.so.1      rootfs glibc 2.33

Both words are correct and any ABI gate must accept both, or it fails on every one of the 56 extension modules in the tree. c_helper.so reads 0x70001407 too, for the same reason.

-EL -mnan=2008 are mandatory in CFLAGS and in LDFLAGS. This toolchain defaults to big-endian legacy-NaN; the flags are what move it. Passing them in CFLAGS is not enough, because several of the eight projects here do not forward CFLAGS to their link line, and an object linked without them is legacy-NaN however it was compiled.

So the build does not pass the flags at all. It installs PATH wrapper scripts that bake them into the gcc driver:

#!/bin/sh
exec /toolchain/bin/mips-linux-gnu-gcc -EL -mnan=2008 "$@"

and no build system gets a vote. That is the single most important trick in either copy of this build. The wrapper is itself gated -- compile int main(void){return 0;}, read e_flags, refuse to continue unless it is 0x70001405 -- before 300MB of anything is built on top of it.

musl is forbidden here

s6 is built against musl in this same repo, and s6 is 73MB with static glibc versus 3.6MB with musl. None of that applies to the interpreter: klippy dlopens c_helper.so, which is a glibc shared object, and a musl-linked process cannot dlopen it. So this uses the Ingenic glibc toolchain -- the same one that builds c_helper.so, which is also what makes them a matched pair.

glibc 2.29 (toolchain) against 2.33 (rootfs) is forward compatible, and the measured NEEDED list is six ordinary sonames:

libpthread.so.0  libdl.so.2  libatomic.so.1  libm.so.6  libutil.so.1  libc.so.6

libatomic.so.1 is the one worth naming. 64-bit atomics on mips32 are out-of-line calls into libatomic and CPython 3.13's _Py_atomic_* needs them. It is on the rootfs -- /lib/libatomic.so.1.2.0, measured -- but it is the only one of the six that is not obviously part of a base system, so the gate says so out loud.

Static dependencies, and a static libpython

All seven C libraries are built -fPIC and linked in as .a. Nothing of ours ships as a .so, and --disable-shared puts libpython inside the executable rather than beside it.

The reason is not size, it is isolation. A shared build needs an LD_LIBRARY_PATH, and on this printer that path is a minefield: /usr/prog carries libffi.so.8 while the rootfs carries libffi.so.7, FlashForge's openssl is 1.0.2d, and a stock OTA can replace any of it. Statically linked, the interpreter maps nothing under /usr/prog -- which case-python.sh section 3 proves by reading /proc/self/maps of a process that has imported ssl, ctypes, sqlite3, lzma, zlib and hashlib first. Zero mappings. It also means it starts with LD_LIBRARY_PATH empty, which FlashForge's cannot.

The cost is a few MB of duplicated libcrypto between _ssl.so and _hashlib.so. At 30MB that is a good trade.

A --disable-shared interpreter is not automatically usable by third-party extension modules -- they resolve Python's symbols out of the running executable, which only works if it was linked -export-dynamic. That was checked, not assumed: an out-of-tree extension module was cross-compiled against the staged include/ and imported successfully on the replica.

The trap that costs a day: _sqlite3 and -lm

The one module this entire build exists for goes missing silently.

A shared libsqlite3.so carries its own DT_NEEDED on libm. A libsqlite3.a does not. So CPython's

checking for sqlite3_bind_double in -lsqlite3

link probe fails with a wall of undefined reference to floor/log/pow/..., and CPython 3.13 records _sqlite3 as "missing" and carries on. It is a probe failure, not a compile failure. Nothing in 400 lines of build output says why. You get a clean build, a working interpreter, and no sqlite3.

The fix is two exports:

LIBS="-latomic -lm"
LIBSQLITE3_LIBS="-L$DEP/lib -lsqlite3 -lm"

the second stating the link line outright so pkg-config cannot reorder -lm out from under the probe. And because a silent failure fixed by an easily-deleted export is a silent failure waiting to come back, both copies of this build hard-fail when _sqlite3 is absent, bin/verify.sh checks the packaged tree for it, and case-python.sh does not merely import it: it creates a database, inserts rows, closes it, and reopens it from disk in a second process. An import proves the .so loaded. Only the second process proves there is a database.

Two OpenSSL traps

Both hit for real on 3.0.15:

• no-docs does not exist before OpenSSL 3.1. On 3.0.x it is an "Unsupported options" hard error, not a warning.
• The linux-mips32 target hardcodes -mips2 into its cflags. This toolchain defaults to -mfp64, and gcc rejects the combination below mips32r2: "'-mgp32' and '-mfp64' can only be combined if the target supports the mfhc1 and mthc1 instructions". User cflags land after the target's on the command line, so appending -mips32r2 puts the ISA back where the printer is. If a future OpenSSL orders them the other way, linux-generic32 (portable C, no mips assembly) is the fallback -- and both copies of the build take it automatically rather than leaving it as a note, because the failure is a screenful of assembler errors that says nothing about ISA levels.

This is why OPENSSL_VERSION is pinned to the 3.0 LTS branch and not bumped casually.

The gap: there are no CA certificates

--openssldir points at /usr/data/anvil/ssl, which is where the interpreter looks for a trust store on the printer. Nothing installs one there, and the rootfs has none to borrow.

So: import ssl works, TLS works, and verifying a certificate chain does not. ssl.create_default_context() builds a context with an empty trust store and every verified connection fails. Anything that fetches over https on this interpreter has to be handed a cafile of its own until somebody ships a ca-certificates bundle into that directory -- which is ~200KB and an open piece of work, not a decision.

case-python.sh prints the trust-store paths and says which of the two states the printer is in, rather than asserting either, so the day someone ships a bundle the gate reports it instead of failing.

Sizes and time

	files	on disk
make install output	2909	183 MB
trimmed -- what ships	608	30 MB
trimmed, gzipped		10.4 MB

The trim drops the CPython test package and idlelib (nothing on a printer runs either), tkinter (there is no X11), include/ and config-*/ (they exist to build extension modules, which happens on a developer's machine), every .a, and every __pycache__ -- 12MB of .pyc for modules that will be imported once if ever, and which the interpreter regenerates on demand anyway. The interpreter and every lib-dynload/*.so are stripped.

It also empties bin/ of everything except python3.13 itself -- the python3 symlink, idle3, pydoc3 and the *-config scripts -- and drops lib/pkgconfig. Those are all build-time or convenience files, and in a shared prefix root they are not neutral: bin/ and lib/ here also hold s6's binaries and, through anvil-env.sh, sit on every mod process's PATH. See "Where it lands" above. The build asserts bin/ holds exactly one name afterwards, so a future CPython that installs one more launcher fails the build rather than quietly adding a name to PATH.

Cold build: 142 seconds (tools/python/build.sh, 16 cores), of which about 90 is the x86-64 build-python. In the build lane it is ~100s and it happens once: bin/patch.sh caches the cross-built tree in work/.py313 under a stamp of all eight versions, so every later build copies rather than compiles. The stamp is all eight and not just CPython's, because a bumped OpenSSL under an unchanged PY_VERSION has to rebuild.

Cross-building CPython needs a build-python of the same version -- the Makefile runs it to freeze modules, generate the deepfreeze sources and byte-compile the stdlib, and configure hard-errors when the version does not match. That is why docker/Dockerfile.build carries a host C compiler, and why PY_VERSION moves both halves of the build at once.

Where it lands

$MODDIR -- /usr/data/anvil -- is a --prefix root. That is the whole reason s6 was configured for it, and it is why the mod's tree has bin/, lib/, libexec/ and etc/ directly inside it rather than a directory per package. The interpreter is configured --prefix=/usr/data/anvil like everything else, so it installs as bin/python3.13 beside bin/s6-svscan, with its stdlib in lib/python3.13/. One prefix, one place to look.

That path is compiled in -- sys.prefix and the stdlib search that follows from it -- so moving the directory on the printer breaks the interpreter the way moving s6 breaks its waiting verbs. It has to be rebuilt, not renamed; which is itself an argument for keeping it in the one prefix the mod already guarantees rather than inventing a second one.

One thing does not ship: the python3 symlink. make install puts it beside python3.13, along with idle3, pydoc3 and the *-config scripts. anvil-env.sh prepends $MODDIR/bin to PATH -- it has to, because s6-svscan execs s6-supervise by name -- so a bin/python3 of ours would sit in front of FlashForge's for every process that sources it, and anything saying python3 rather than "$FF_PYTHON" would change interpreter without anyone deciding to. The build deletes it before staging and asserts that bin/ contains python3.13 and nothing else; bin/verify.sh checks the packaged tree for it; and case-python.sh section 6 asks the shell, with the mod's own PATH in force, what python3 resolves to. The answer is still FlashForge's binary.

It ships. Nothing runs it.

payload/anvil-env.sh still points FF_PYTHON at /usr/prog/Python-3.8.2/bin/python3. That is timing, not preference: klippy, Moonraker and ff-startup.py import third-party C extensions -- tornado, lmdb, cffi, greenlet, pillow, libnacl -- which exist on this printer only as mipsel .so files built against 3.8. None has been cross-built for 3.13. Switching before they exist is a dark screen and an ImportError in a log nobody reads.

FlashForge's tree is left alone in both directions: nothing writes to /usr/prog, and our interpreter lives entirely under /usr/data/anvil like everything else this mod installs. This is deliberately the same shape as phase 2, which shipped s6 without starting it -- the artefact reaches real printers where it can be measured, and the switch stays a one-line change instead of a build change and a boot change arriving together. Cross-building the extensions is the actual work in adopting this; not the interpreter.

Reproducing

./bin/fetch-assets.sh --all          # pins + the Ingenic toolchain
./tools/python/build.sh              # 142s, artefacts in tools/python/out/

That is how the numbers above were measured, and it is kept here for the record and for trying a version bump before it becomes a pin. It is not how the shipped interpreter is built: bin/patch.sh section 5c compiles it in place inside the repo's own build image, from the sha256-pinned tarballs, and caches it in work/.py313.

The gate, against the tree the build actually produced:

tar -czf work/.py-gate.tgz -C work/.py313 python3.13
PRINTER_IMAGE=monstrofil/creator5-printer:latest \
    ./test/integration/printer-exec.py \
    test/integration/printer/case-python.sh py.tgz=work/.py-gate.tgz

or make test-python, which does both.