starred/firmware
1
0 Fork 0
mirror of https://github.com/Klipper4FlashForge/firmware.git synced 2026-10-21 21:02:16 -05:00
Code Issues Packages Projects Releases 8 Wiki Activity
Files
fbb3182e68bb633927e7da75bc27e7b348286832
firmware/gcode/creator5-feature-test.gcode
T
Oleksandr ShyshatskyiandClaude Opus 5 424ef059a7 Stop telling the operator to persist prepare=0 
The feature print's header and docs/hardware-testing.md both said to set
FF_BEFORE_PRINT_START.prepare to 0 and offered "persist it by editing
variable_prepare" as the way to make it stick. Following that breaks
every other print on this machine.

The Orca profile here deliberately carries no START_PRINT: [ff_print]
wraps SDCARD_PRINT_FILE and the implicit prepare is what homes and heats
the bed. FlashForge's start block has no G28 and no M190 of its own, so
with prepare persisted at 0 an ordinary file's first move -- G1 Z5 F2400
-- runs on unhomed axes, and nothing has heated the bed.

The feature print is the one exception, because it carries its own
START_PRINT with the TOOLS= list the automatic path cannot derive
(nothing in a sliced file names the tool set without reading the
slicer's config block). So it is a per-print toggle, and both files now
say to put it back afterwards -- or just RESTART, which does it anyway.

Comments and docs only.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-24 15:27:54 +03:00

602 lines
17 KiB
Plaintext
Raw Blame History

; ====================================================================
; Creator 5 / Creator 5 Pro feature-verification print
; Run gcode/creator5-safe-moves.gcode FIRST: it is this file with
; the heat and the filament taken out, 50 mm above the plate.
;
; tools T0,T1 nozzle 220 C bed 60 C layer 0.20 mm
;
; BEFORE YOU START THIS FILE
; * every tool listed above must be docked or mounted, and
; calibrated -- START_PRINT refuses the job otherwise, before
; it heats or homes anything. That refusal is itself the first
; thing this file verifies.
; * this file is the exception: it carries its own START_PRINT, with
; the TOOLS= list the automatic path cannot derive. So turn the
; implicit prepare off FOR THIS PRINT ONLY, or the machine homes,
; purges and grabs twice:
; SET_GCODE_VARIABLE MACRO=FF_BEFORE_PRINT_START VARIABLE=prepare VALUE=0
; and put it BACK when the print is done:
; SET_GCODE_VARIABLE MACRO=FF_BEFORE_PRINT_START VARIABLE=prepare VALUE=1
; Do NOT persist 0 by editing variable_prepare. Every ordinary file
; here relies on the automatic path -- the stock Orca profile calls
; no START_PRINT and carries no G28, so with prepare off nothing
; homes or heats the bed and its first move, G1 Z5 F2400, runs on
; unhomed axes. A restart puts it back to 1 by itself.
; * filament loaded in every listed tool. LOAD_FILAMENT TOOL=<n>
; is not called from here -- it releases the tool when it
; finishes, which is wrong in the middle of a print.
;
; WHAT TO WATCH, IN ORDER
; 1 START_PRINT: homing, then one purge+wipe per tool at the
; chute while the bed heats. A tool that is skipped here was
; not in TOOLS=.
; 2 prime line at Y0, then the console dump: TOOLCHANGE_STATUS
; and TOOL_OFFSET_STATUS record the live geometry into
; /usr/data/logs/printer.log next to the print itself.
; 3 nested squares: one ring per tool, 2.00 mm apart by design.
; Measure the gap on all four sides when it is cold. Left vs
; right is that tool's X offset error, front vs back its Y.
; 4 solid patch: a single first layer. Squish is the verdict on
; the print Z offset -- see docs/toolchange.md before you
; change anything, and correct it with TOOL_Z_ADJUST, not by
; editing nozzle_z.
; 5 fan sweep: each M106 target on its own for 3 s. P101 is a
; no-op by design; bare M106 and P1 are the part fan; P2 is
; the chamber loop + cool pair; P3 is the chamber fan.
; 6 chamber: M141 S40. A Pro heats. A plain Creator 5 answers
; 'no chamber heater on this model' and prints on -- an abort
; here is a real failure.
; 7 tower: one tool change per layer, hot, mid-print. Layer
; shift between rings is a tool-to-tool offset error; a step
; in Z is nozzle_z. THIS is where to press Pause in Mainsail
; and then Resume: hotends off, park lift, reheat, and the
; print carries on from the same spot.
; 8 END_PRINT: heaters off, bed drops to present the part, the
; mounted tool goes back to its dock, motors off.
; ====================================================================
M140 S60
;HEIGHT:0.20
;start_gcode
M106 P101 S0 ; L+R_PLA_Turbo_Fan_0-255 -- NO-OP: printer.macro.cfg's M106 has
; the P101 branch commented out (there is no [fan_generic internal_fan])
M106 P2 S0 ; chamber_loop_fan + chamber_cool_fan
;M191 S0 -- chamber temp: NOT a klipper command in this fork (the app intercepts M191); harmless but noisy, left commented
M106 S0 ; part cooling fan (fan_generic fanM106) -- P1 and bare M106 both land here
M106 P3 S0 ; chamber_fan
M104 S220 T0 ; preheat in parallel
START_PRINT BED=60 TOOL=0 NOZZLE=220 LAYER=0.20 LEVEL=0 TOOLS=0:220,1:220
G90
M83
M109 S220 T0
G1 Z5 F2400
G1 X256 Y0 Z0.2 F6000
G1 E5 F299
G1 X216 E10 F299
;start_gcode end
; ----------------------------------------------------------------------
; Phase 0: report the geometry this print is about to trust
; ----------------------------------------------------------------------
M117 Phase 0: report the geometry this print is about to trust
T0
TOOLCHANGE_STATUS
TOOL_OFFSET_STATUS
M204 S5000
M220 S100
M221 S100
SET_PRESSURE_ADVANCE ADVANCE=0.0300
; the tools this file will need later, warmed to standby now so a
; mid-print change waits for a short reheat and not a cold start
M104 S180 T1
; ----------------------------------------------------------------------
; Phase 1: tool offsets -- one square per tool, 2.00 mm apart
; ----------------------------------------------------------------------
M117 Phase 1: tool offsets -- one square per tool, 2.00 mm apart
; T0 ring: 24.0 x 24.0 mm
G1 E-0.8000 F2400
G1 X58.000 Y163.000 F12000
G1 E0.8000 F2400
G1 X82.000 Y163.000 E0.99780 F1800
G1 X82.000 Y187.000 E0.99780 F1800
G1 X58.000 Y187.000 E0.99780 F1800
G1 X58.000 Y163.000 E0.99780 F1800
; T1 ring: 28.0 x 28.0 mm
G1 E-0.8000 F2400
G1 Z5.200 F1200
M104 S180 T0
M104 S220 T1
T1
M109 S220 T1
; T1 prime line at Y5.0 (the start block primed T0 only)
G1 X256.000 Y5.000 F12000
G1 Z0.200 F1200
G1 E5 F299
G1 X216.000 E10 F299
G1 E-0.8000 F2400
G1 X56.000 Y161.000 F12000
G1 E0.8000 F2400
G1 X84.000 Y161.000 E1.16410 F1800
G1 X84.000 Y189.000 E1.16410 F1800
G1 X56.000 Y189.000 E1.16410 F1800
G1 X56.000 Y161.000 E1.16410 F1800
; ----------------------------------------------------------------------
; Phase 2: first layer -- squish is the print Z offset
; ----------------------------------------------------------------------
M117 Phase 2: first layer -- squish is the print Z offset
G1 E-0.8000 F2400
G1 Z5.200 F1200
M104 S180 T1
M104 S220 T0
T0
M109 S220 T0
G1 X162.500 Y162.500 F12000
G1 Z0.200 F1200
G1 E0.8000 F2400
G1 X187.500 Y162.500 E1.03938 F1800
G1 X187.500 Y187.500 E1.03938 F1800
G1 X162.500 Y187.500 E1.03938 F1800
G1 X162.500 Y162.500 E1.03938 F1800
G1 E-0.8000 F2400
G1 X163.000 Y163.000 F12000
G1 E0.8000 F2400
G1 X187.000 Y163.000 E0.99780 F1800
G1 X187.000 Y163.500 E0.02079 F1800
G1 X163.000 Y163.500 E0.99780 F1800
G1 X163.000 Y164.000 E0.02079 F1800
G1 X187.000 Y164.000 E0.99780 F1800
G1 X187.000 Y164.500 E0.02079 F1800
G1 X163.000 Y164.500 E0.99780 F1800
G1 X163.000 Y165.000 E0.02079 F1800
G1 X187.000 Y165.000 E0.99780 F1800
G1 X187.000 Y165.500 E0.02079 F1800
G1 X163.000 Y165.500 E0.99780 F1800
G1 X163.000 Y166.000 E0.02079 F1800
G1 X187.000 Y166.000 E0.99780 F1800
G1 X187.000 Y166.500 E0.02079 F1800
G1 X163.000 Y166.500 E0.99780 F1800
G1 X163.000 Y167.000 E0.02079 F1800
G1 X187.000 Y167.000 E0.99780 F1800
G1 X187.000 Y167.500 E0.02079 F1800
G1 X163.000 Y167.500 E0.99780 F1800
G1 X163.000 Y168.000 E0.02079 F1800
G1 X187.000 Y168.000 E0.99780 F1800
G1 X187.000 Y168.500 E0.02079 F1800
G1 X163.000 Y168.500 E0.99780 F1800
G1 X163.000 Y169.000 E0.02079 F1800
G1 X187.000 Y169.000 E0.99780 F1800
G1 X187.000 Y169.500 E0.02079 F1800
G1 X163.000 Y169.500 E0.99780 F1800
G1 X163.000 Y170.000 E0.02079 F1800
G1 X187.000 Y170.000 E0.99780 F1800
G1 X187.000 Y170.500 E0.02079 F1800
G1 X163.000 Y170.500 E0.99780 F1800
G1 X163.000 Y171.000 E0.02079 F1800
G1 X187.000 Y171.000 E0.99780 F1800
G1 X187.000 Y171.500 E0.02079 F1800
G1 X163.000 Y171.500 E0.99780 F1800
G1 X163.000 Y172.000 E0.02079 F1800
G1 X187.000 Y172.000 E0.99780 F1800
G1 X187.000 Y172.500 E0.02079 F1800
G1 X163.000 Y172.500 E0.99780 F1800
G1 X163.000 Y173.000 E0.02079 F1800
G1 X187.000 Y173.000 E0.99780 F1800
G1 X187.000 Y173.500 E0.02079 F1800
G1 X163.000 Y173.500 E0.99780 F1800
G1 X163.000 Y174.000 E0.02079 F1800
G1 X187.000 Y174.000 E0.99780 F1800
G1 X187.000 Y174.500 E0.02079 F1800
G1 X163.000 Y174.500 E0.99780 F1800
G1 X163.000 Y175.000 E0.02079 F1800
G1 X187.000 Y175.000 E0.99780 F1800
G1 X187.000 Y175.500 E0.02079 F1800
G1 X163.000 Y175.500 E0.99780 F1800
G1 X163.000 Y176.000 E0.02079 F1800
G1 X187.000 Y176.000 E0.99780 F1800
G1 X187.000 Y176.500 E0.02079 F1800
G1 X163.000 Y176.500 E0.99780 F1800
G1 X163.000 Y177.000 E0.02079 F1800
G1 X187.000 Y177.000 E0.99780 F1800
G1 X187.000 Y177.500 E0.02079 F1800
G1 X163.000 Y177.500 E0.99780 F1800
G1 X163.000 Y178.000 E0.02079 F1800
G1 X187.000 Y178.000 E0.99780 F1800
G1 X187.000 Y178.500 E0.02079 F1800
G1 X163.000 Y178.500 E0.99780 F1800
G1 X163.000 Y179.000 E0.02079 F1800
G1 X187.000 Y179.000 E0.99780 F1800
G1 X187.000 Y179.500 E0.02079 F1800
G1 X163.000 Y179.500 E0.99780 F1800
G1 X163.000 Y180.000 E0.02079 F1800
G1 X187.000 Y180.000 E0.99780 F1800
G1 X187.000 Y180.500 E0.02079 F1800
G1 X163.000 Y180.500 E0.99780 F1800
G1 X163.000 Y181.000 E0.02079 F1800
G1 X187.000 Y181.000 E0.99780 F1800
G1 X187.000 Y181.500 E0.02079 F1800
G1 X163.000 Y181.500 E0.99780 F1800
G1 X163.000 Y182.000 E0.02079 F1800
G1 X187.000 Y182.000 E0.99780 F1800
G1 X187.000 Y182.500 E0.02079 F1800
G1 X163.000 Y182.500 E0.99780 F1800
G1 X163.000 Y183.000 E0.02079 F1800
G1 X187.000 Y183.000 E0.99780 F1800
G1 X187.000 Y183.500 E0.02079 F1800
G1 X163.000 Y183.500 E0.99780 F1800
G1 X163.000 Y184.000 E0.02079 F1800
G1 X187.000 Y184.000 E0.99780 F1800
G1 X187.000 Y184.500 E0.02079 F1800
G1 X163.000 Y184.500 E0.99780 F1800
G1 X163.000 Y185.000 E0.02079 F1800
G1 X187.000 Y185.000 E0.99780 F1800
G1 X187.000 Y185.500 E0.02079 F1800
G1 X163.000 Y185.500 E0.99780 F1800
G1 X163.000 Y186.000 E0.02079 F1800
G1 X187.000 Y186.000 E0.99780 F1800
G1 X187.000 Y186.500 E0.02079 F1800
G1 X163.000 Y186.500 E0.99780 F1800
G1 X163.000 Y187.000 E0.02079 F1800
G1 X187.000 Y187.000 E0.99780 F1800
; ----------------------------------------------------------------------
; Phase 3: fan map -- one target at a time, 3 s each
; ----------------------------------------------------------------------
M117 Phase 3: fan map -- one target at a time, 3 s each
G1 E-0.8000 F2400
G1 Z15.000 F1200
G1 X230.000 Y2.000 F12000
; P101: nothing should spin (no-op)
M117 P101: nothing should spin (no-op)
M106 P101 S255
G4 P3000
; bare M106: part fan, full
M117 bare M106: part fan, full
M106 S255
G4 P3000
; bare M106: part fan, half
M117 bare M106: part fan, half
M106 S128
G4 P3000
; part fan off
M117 part fan off
M106 S0
G4 P3000
; P2: chamber loop + cool fans
M117 P2: chamber loop + cool fans
M106 P2 S255
G4 P3000
; P2 off
M117 P2 off
M106 P2 S0
G4 P3000
; P3: chamber fan
M117 P3: chamber fan
M106 P3 S255
G4 P3000
; P3 off
M117 P3 off
M106 P3 S0
G4 P3000
; ----------------------------------------------------------------------
; Phase 4: M141 -- heats on a Pro, is refused politely otherwise
; ----------------------------------------------------------------------
M117 Phase 4: M141 -- heats on a Pro, is refused politely otherwi
M141 S40
; ----------------------------------------------------------------------
; Phase 5: tower -- one tool change per layer. Pause/Resume here.
; ----------------------------------------------------------------------
M117 Phase 5: tower -- one tool change per layer. Pause/Resume he
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 1/12, Z0.20, T0
M106 S0
G1 X113.000 Y73.000 F12000
G1 Z0.200 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.99780 F1800
G1 X137.000 Y97.000 E0.99780 F1800
G1 X113.000 Y97.000 E0.99780 F1800
G1 X113.000 Y73.000 E0.99780 F1800
G1 E-0.8000 F2400
G1 X113.500 Y73.500 F12000
G1 E0.8000 F2400
G1 X136.500 Y73.500 E0.95623 F1800
G1 X136.500 Y96.500 E0.95623 F1800
G1 X113.500 Y96.500 E0.95623 F1800
G1 X113.500 Y73.500 E0.95623 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 2/12, Z0.40, T1
G1 E-0.8000 F2400
G1 Z5.200 F1200
M104 S180 T0
M104 S220 T1
T1
M109 S220 T1
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z0.400 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 3/12, Z0.60, T0
G1 E-0.8000 F2400
G1 Z5.400 F1200
M104 S180 T1
M104 S220 T0
T0
M109 S220 T0
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z0.600 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 4/12, Z0.80, T1
G1 E-0.8000 F2400
G1 Z5.600 F1200
M104 S180 T0
M104 S220 T1
T1
M109 S220 T1
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z0.800 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 5/12, Z1.00, T0
G1 E-0.8000 F2400
G1 Z5.800 F1200
M104 S180 T1
M104 S220 T0
T0
M109 S220 T0
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z1.000 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 6/12, Z1.20, T1
G1 E-0.8000 F2400
G1 Z6.000 F1200
M104 S180 T0
M104 S220 T1
T1
M109 S220 T1
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z1.200 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 7/12, Z1.40, T0
G1 E-0.8000 F2400
G1 Z6.200 F1200
M104 S180 T1
M104 S220 T0
T0
M109 S220 T0
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z1.400 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 8/12, Z1.60, T1
G1 E-0.8000 F2400
G1 Z6.400 F1200
M104 S180 T0
M104 S220 T1
T1
M109 S220 T1
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z1.600 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 9/12, Z1.80, T0
G1 E-0.8000 F2400
G1 Z6.600 F1200
M104 S180 T1
M104 S220 T0
T0
M109 S220 T0
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z1.800 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 10/12, Z2.00, T1
G1 E-0.8000 F2400
G1 Z6.800 F1200
M104 S180 T0
M104 S220 T1
T1
M109 S220 T1
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z2.000 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 11/12, Z2.20, T0
G1 E-0.8000 F2400
G1 Z7.000 F1200
M104 S180 T1
M104 S220 T0
T0
M109 S220 T0
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z2.200 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
;LAYER_CHANGE
;HEIGHT:0.20
; tower layer 12/12, Z2.40, T1
G1 E-0.8000 F2400
G1 Z7.200 F1200
M104 S180 T0
M104 S220 T1
T1
M109 S220 T1
M106 S255
G1 X113.000 Y73.000 F12000
G1 Z2.400 F1200
G1 E0.8000 F2400
G1 X137.000 Y73.000 E0.89802 F1800
G1 X137.000 Y97.000 E0.89802 F1800
G1 X113.000 Y97.000 E0.89802 F1800
G1 X113.000 Y73.000 E0.89802 F1800
G1 E-0.8000 F2400
G1 X113.450 Y73.450 F12000
G1 E0.8000 F2400
G1 X136.550 Y73.450 E0.86435 F1800
G1 X136.550 Y96.550 E0.86435 F1800
G1 X113.450 Y96.550 E0.86435 F1800
G1 X113.450 Y73.450 E0.86435 F1800
; ----------------------------------------------------------------------
; Phase 6: hand back to the machine end block
; ----------------------------------------------------------------------
M117 Phase 6: hand back to the machine end block
G1 E-0.8000 F2400
M141 S0
M106 S0
TOOLCHANGE_STATUS
;end_gcode
END_PRINT
;end_gcode end
; filament extruded by the body: 163.1 mm (~0.5 g of PLA)
Reference in new issue View Git Blame Copy Permalink