Several links pointed at heading anchors that no longer exist (renamed
or moved sections), so they did not jump to the intended section.
Update them to the current anchors, and use a relative path for the
sample-pwm-tool.cfg link so it resolves like the other config links.
Signed-off-by: Satvik Mishra <Satvikmishra.ipu146183@maims.ac.in>
This doc still says the Pi 2 is an option for Klipper, in this day and age, i am not sure it is. From anecdotal evidence, the lowest pi recommended should be the zero2w. I also changed the wording and removed some Octoprint wording in that section to better reflect how things are today, as i don't think even with virtual_sdcard these older devices will keep up.
Signed-off-by: James Hartley <james@hartleyns.com>
The section-index plugin can cause some confusing navigation. Use the
simpler site navigation for now.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Create a sample-aliases.cfg with all the aliases that are currently
hardcoded in the klippy.pins.py module.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Add support for automatically calculating the internal step_distance
from new config parameters - rotation_distance, microsteps,
full_steps_per_rotation, and gear_ratio.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Use javascript to fixup the "github pages" rendering of links to files
outside the docs/ directory. Then use normal relative links in the
documentation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Move all the config reference information from files in the config/
directory to a new Config_Reference.md document.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Fix rendering of Patreon URL in FAQ. Use same "ls" command to find
the serial port that Installation.md uses. Note Raspberry Pi 4 is
supported. Note problems with ModemManager. Point to Bed_Level.md in
Z position_endstop question. Link to Config_checks.md in "Z
screaching" FAQ.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Update BLTouch.md, FAQ.md, and sample-probe-as-z-endstop.cfg to
recommend using a safe_z_home config section over a homing_override
config section.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Add note that `under power` may be related to communication issues.
Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The junction_deviation configuration parameter has a number of quirks
that make it difficult to configure. Replace it with a
"square_corner_velocity" configuration parameter.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Satvik Mishra