Add SPI access, internal-clock PLL setup, integrated-current-sense
current control, SpreadCycle, temperature reporting, and standard TMC
fault and status helpers. Check the PLL whenever registers are restored
and clear the phase offset when reinitializing the PLL.
Document the new configuration and include a Klippy regression case.
Derived from the GPLv3 TMC5262 driver by Rogerio Goncalves in Kalico.
Signed-off-by: Rogerio Goncalves <rogerlz@gmail.com>
Signed-off-by: Uriah Kessman <fishyfabspnw@gmail.com>
Embedding the minimal Kconfig in the identify dictionary pushed the
stm32f042 regression build past its 32KiB flash limit on older
toolchains. Disabling NeoPixel support frees enough space to fit.
Signed-off-by: Morton Jonuschat <mjonuschat@gmail.com>
The n32g45x had no build coverage. Add a USB and a CAN config so CI
compiles both the 96MHz and 128MHz clock paths.
Signed-off-by: Lev Voronov <minicx@disroot.org>
Rework the tap_threshold to use units of hz/mm (instead of hz). This
will make it easier to implement tap calibration based on results of
PROBE_EDDY_CURRENT_CALIBRATE and previous tap attempts. It can also
make the tap_threshold more stable with different probe speeds and
sensor rates.
As a result of this change, existing user configurations will need to
be updated. It is hoped that existing configurations will have a
value that is sufficiently low that they will reliably get an error
until they can recalibrate.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Print near the origin lead in to fast motor movements, therefore the
movement needs to be scaled down. The start of the scaling is done via
a rotation velocity limit from the config.
Signed-off-by: Nils Hensch <nils.hensch@gmx.de>
The config option 'z_offset' name is confusing as its behavior is
notably different from how other probe hardware uses 'z_offset'.
Rename to 'descend_z' to make its behavior more clear.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Allow the user to deselect CONFIG_WANT_TRIGGER_ANALOG even if one of
the sensors could utilize the support.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Use SOS filters + derivative filter to generate dF/dT on mcu.
Feed that to the MCU's trigger_analog peak detection.
Interpret peak time as a tap event
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
This also enables arbitrary using names for primary carriages
with generic_cartesian kinematics.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
Numerically optimized versions of *EI shapers have been tuned
for specific ranges of damping ratios and will show poor stability
outside of these designated ranges.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
Commit d40fd219 added support for defining extra axes, however that
change could break the M114 command. Update the code to fix M114.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Add a new G-Code command that can register a manual_stepper as an
additional axis on standard G-Code G1 commands.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* tests: Added a regression test for generic_cartesian kinematics
* kinematics: An intial implementation of generic_cartesian kinematics
* generic_cartesian: Refactored kinematics configuration API
* generic_cartesian: Use stepper instead of kinematic_stepper in configs
* generic_cartesian: Added SET_STEPPER_KINEMATICS command
* generic_cartesian: Fixed parsing of section names
* docs: Generic Caretsian kinematics documentation and config samples
* generic_cartesian: Implemented multi-mcu homing validation
* generic_cartesian: Fixed typos in docs, minor fixes
* generic_cartesian: Renamed `kinematics` option to `carriages`
* generic_cartesian: Moved kinematic_stepper.py file
* idex_modes: Internal refactoring of handling dual carriages
* stepper: Refactored the code to not store a reference to config object
* config: Updated example-generic-cartesian config
* generic_cartesian: Restricted SET_STEPPER_CARRIAGES and exported status
* idex_modes: Fixed handling stepper kinematics with input shaper enabled
* config: Updated configs and tests for SET_DUAL_CARRIAGE new params
* generic_cartesian: Avoid inheritance in the added classes
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
Support setting individual options instead of one global option (
WANT_BUTTONS, WANT_TMCUART, WANT_NEOPIXEL, WANT_PULSE_COUNTER,
WANT_HX71X).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Previous implementation could crash the idex carriages into each other.
The new code moves the idex carriages together, eliminating this risk
and decreasing the time needed to restore the carriages positions.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
* Create the load_cell host module skeleton to create the sensors and start taking samples.
* Add support for the HX717 and HX711 ADC sensors.
Signed-off-by: Gareth Farrington <gareth@waves.ky>
Uriah Kessman