Kevin O'Connor f604aeeea3 stm32: Set FLASH_SIZE to 32KB on stm32f103x6 ...

This enables the options to reduce code size during "make menuconfig".

Reported by @qpzm1258.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2026-07-11 11:21:44 -04:00

..

ar100

command: Try to encode messages even if space is low

2026-05-25 17:27:09 -04:00

atsam

stepper: Support step on both edges with custom minimum pulse duration

2025-03-20 19:56:55 -04:00

atsamd

atsamd: Fix possible buffer overflow in usbserial.c

2025-12-17 10:18:39 -05:00

avr

avr: Fix missing SP definition in newer avr-libc and missing include in adc.c (#7233)

2026-03-24 12:51:44 -04:00

generic

canserial: Increase transmit_buf size to 192 bytes

2026-05-25 17:27:09 -04:00

hc32f460

Kconfig: Note which chips require software divide operations

2025-04-17 12:09:19 -04:00

linux

command: Try to encode messages even if space is low

2026-05-25 17:27:09 -04:00

lpc176x

lpc176x: Add CAN bus support

2026-07-08 12:26:25 -04:00

pru

command: Try to encode messages even if space is low

2026-05-25 17:27:09 -04:00

rp2040

rp2040: Add GENERIC_03H CLKDIV 8 option

2026-07-08 12:24:35 -04:00

simulator

command: Fix handling of buffer passing in args[] on 64bit mcu

2020-10-30 14:04:12 -04:00

stm32

stm32: Set FLASH_SIZE to 32KB on stm32f103x6

2026-07-11 11:21:44 -04:00

adccmds.c

adccmds: Add support for homing/probing triggering with regular mcu adc pins

2026-02-23 21:24:38 -05:00

basecmd.c

basecmd: Update stats timing check to support 32bit duration

2025-04-28 19:28:52 -04:00

basecmd.h

stepper: Use a reusable interface to the "move queue"

2020-12-04 16:10:13 -05:00

buttons.c

buttons: initialize mcu buttons based on inverted state

2019-07-05 20:01:07 -04:00

byteorder.h

byteorder: Add a header file defining common byteswap functions

2018-05-21 09:44:40 -04:00

command.c

command: Try to encode messages even if space is low

2026-05-25 17:27:09 -04:00

command.h

command: Try to encode messages even if space is low

2026-05-25 17:27:09 -04:00

compiler.h

compiler.h: Check if __aligned and __section macros are already defined

2016-06-13 23:18:59 -04:00

ctr.h

ctr: Encode negative integers in normal hex notation

2019-08-22 13:06:44 -04:00

debugcmds.c

debugcmds: Remove start/end_group commands

2021-05-07 13:53:47 -04:00

endstop.c

trsync: Introduce new "trigger synchronization" support

2021-06-09 18:58:35 -04:00

gpiocmds.c

gpiocmds: Merge digital output and soft pwm code

2020-12-10 12:06:26 -05:00

i2c_software.c

i2c_software: Place wires in high impedance state after setup

2025-07-22 14:04:50 -04:00

i2c_software.h

i2c: handle errors at i2ccmds

2024-10-26 22:06:30 -04:00

i2ccmds.c

bus: allow mark i2c as write only

2026-02-07 14:01:45 -05:00

i2ccmds.h

ldc1612: shutdown on i2c errors

2024-10-26 22:06:30 -04:00

initial_pins.c

initial_pins: Add check to reduce compile time size when not in use

2022-12-16 22:46:47 -05:00

initial_pins.h

initial_pins: Add ability to configure output pins at mcu startup

2019-03-17 20:56:25 -04:00

Kconfig

ads131m0x: Added ADS131M02 and ADS131M04 sensors support (#7264)

2026-05-23 19:30:38 -04:00

lcd_hd44780.c

lcd_hd44780: Make sure nsecs_to_ticks() is always inlined

2025-04-17 12:09:19 -04:00

lcd_st7920.c

lcd_st7920: Make sure nsecs_to_ticks() is always inlined

2025-04-17 12:09:19 -04:00

Makefile

ads131m0x: Added ADS131M02 and ADS131M04 sensors support (#7264)

2026-05-23 19:30:38 -04:00

neopixel.c

neopixel: Increase PULSE_LONG_TICKS to 800 for compatibility

2025-11-13 15:15:28 -05:00

pulse_counter.c

pulse_counter: Use "clock" suffix instead of "time" in commands

2021-04-30 11:40:37 -04:00

pwmcmds.c

pwmcmds: Use move queue for hard PWM

2020-12-04 16:10:13 -05:00

sched.c

sched: Improve timer vs task priority check

2024-10-26 22:09:14 -04:00

sched.h

sched: Improve timer vs task priority check

2024-10-26 22:09:14 -04:00

sdiocmds.c

stm32: Add sdio support

2023-02-20 19:55:25 -05:00

sdiocmds.h

stm32: Add sdio support

2023-02-20 19:55:25 -05:00

sensor_ads131m0x.c

ads131m0x: Added ADS131M02 and ADS131M04 sensors support (#7264)

2026-05-23 19:30:38 -04:00

sensor_ads1220.c

trigger_analog: Support not compiling trigger_analog on small flash builds

2026-02-23 21:24:38 -05:00

sensor_adxl345.c

sensor_adxl345: No need to schedule start of bulk reading

2024-01-19 11:55:15 -05:00

sensor_angle.c

angle: mt6826s added support

2024-12-12 14:28:45 -05:00

sensor_bmi160.c

bmi160: Add support for BMI160 accelerometer

2026-02-12 17:46:33 -05:00

sensor_bulk.c

sensor_bulk: New C file with helper code for sending bulk sensor measurements

2024-01-19 11:55:15 -05:00

sensor_bulk.h

sensor_bulk: Change maximum data size from 52 to 51 bytes

2024-06-10 12:27:12 -04:00

sensor_hx71x.c

trigger_analog: Support not compiling trigger_analog on small flash builds

2026-02-23 21:24:38 -05:00

sensor_icm20948.c

icm20948: Add support for ICM20948 accelerometer (#6756)

2025-03-04 17:12:26 -05:00

sensor_ldc1612.c

trigger_analog: Support not compiling trigger_analog on small flash builds

2026-02-23 21:24:38 -05:00

sensor_lis2dw.c

sensor_lis2dw: Read 8 samples at a time from sensor fifo

2025-10-13 20:36:11 -04:00

sensor_mpu9250.c

mpu: shutdown on i2c errors

2024-10-26 22:06:30 -04:00

sos_filter.c

trigger_analog: Automatically determine frac_bits in MCU_SosFilter

2026-04-15 10:15:24 -04:00

sos_filter.h

sos_filter: Propagate overflow errors instead of a shutdown

2026-01-25 12:49:01 -05:00

spi_software.c

spi_software: add a delay on mode change

2025-05-26 18:44:29 -04:00

spi_software.h

spi_software: Implementation of software spi

2019-02-13 11:52:20 -05:00

spicmds.c

Kconfig: Support selecting optional features on chips with small flash size

2023-06-08 12:59:30 -04:00

spicmds.h

sensor_angle: Add support for bulk querying of spi angle sensors

2022-03-29 20:34:46 -04:00

stepper.c

stepper: Minor code tweak - remove unneeded parenthesis

2025-05-09 12:58:01 -04:00

stepper.h

trsync: Introduce new "trigger synchronization" support

2021-06-09 18:58:35 -04:00

thermocouple.c

thermocouple: Only shutdown on multiple consecutive sensor errors

2022-09-23 11:56:20 -04:00

tmcuart.c

command: Add command_decode_ptr() helper

2020-10-30 14:04:08 -04:00

trigger_analog.c

trigger_analog: Don't report trigger time as the peak time

2026-01-29 20:57:55 -05:00

trigger_analog.h

trigger_analog: Support not compiling trigger_analog on small flash builds

2026-02-23 21:24:38 -05:00

trsync.c

trsync: Don't require callers of trsync_do_trigger() to disable irqs

2024-10-26 22:11:02 -04:00

trsync.h

trsync: Introduce new "trigger synchronization" support

2021-06-09 18:58:35 -04:00