lightcraft/docs/cr3.md

Canon CR3 decoding

The CR3 adapter reads the CRX Bayer track, CMP1 compression descriptor, CDI1/IAD1 sensor geometry and timed CTMD maker notes. White balance, black/white levels and the default crop come from the file. A Dual Pixel delta track is never substituted for the primary Bayer track.

The EOS R6 Mark III writes ColorData version 66, which keeps version 64's as-shot white balance (word 105) and black level (word 383) offsets. Measured on 33 files from 12 shoots (ISO 100–12800, 1/1250 s–25 s): the as-shot R, G, G, B quadruple is followed by its colour temperature (3271–7424 K across the shoots) and then the fixed preset table (Daylight 5200 K, Shade 7000 K, Cloudy 6000 K, Tungsten 3200 K, ...), and the black levels equal the masked-column levels in every file (512 at low ISO, 2047–2048 above). Word 661 holds 14351 or 13995, but it is not the clipping point: highlights pile up at 16383 and run smoothly through the range above 14351, so version 66 takes its white level from the data.

The in-camera aspect ratio (3:2, 4:3, 16:9, 1:1) is not applied to the sensor data. The maker note's AspectInfo (tag 0x009a: aspect code, cropped width, height, left, top) gives the shot's rectangle inside the recommended crop, and the decoder uses it as the default crop, so the developed image has the shape the photographer framed (PowerShot SX70 HS, EOS 250D, PowerShot G5 X Mark II, EOS M6 Mark II and EOS M50 samples). A rectangle that is missing or does not fit inside the crop is ignored. The embedded JPEG still shows the whole frame.

The EOS R5 Mark II's APS-C crop-mode files (5376 x 3574) state an active area that starts in dark columns (132..~256 sit at the black level) and stops ~130 columns short of the image, while their recommended crop (5088 x 3392, the camera JPEG's size) lies on the image. When the recommended crop doesn't fit inside the stated active area, it is used as the valid area: on raw.pixls.us 7883/7884 the render matches the camera JPEG (high-pass correlation 0.99, was -0.13 with a black band on the left). No other of the 110 CC0 CR3s changes.

The decoder is independent Rust code shared by desktop, CLI and WebAssembly; it has no operating-system imaging dependency or external decoder. Its sources are the public prose descriptions and patents cited in crates/raw/src/vendor/crx.rs. Unsupported coding variants retain the existing embedded-JPEG fallback and its visible warning when a JPEG is present. So does any other CR3 decode error (a corrupt file, or a body whose CRX stream the decoder misreads): every CR3 opened from its embedded JPEG before this decoder, and not every body's variants are known, so a CR3 never fails to import or load where a preview exists. HEVC-only preview tracks are recognized but are not decoded.

Variant status

The supported and rejected CRX coding variants. Every rejection is an explicit RawError::Unsupported whose text is part of the contract: crates/raw/tests/cr3_variants.rs rebuilds each variant as a synthetic CR3 fixture and asserts the exact string, and that header probing (probe_info, the import path) and full decoding fail with the same error, because the engine shows that reason when it falls back to the embedded preview. The same tests decode a control fixture at both edges of each accepted range, so a rejection can only come from the gate named here.

Variant	Status	Gate	Exact rejection
Version 0x100, four Bayer planes, encoding 0, wavelet levels 0 (lossless) or 3 (C-RAW, horizontal tiles)	Supported	supports() in vendor/crx.rs	none
Version 0x200: single-tile 14-bit three-level C-RAW with adaptive quantization, QP map of any height (an odd height leaves the last QP row without a partner and it is used on its own), QP values 131–175 (169–175: EOS R6 Mark II)	Supported	supports(), qp_map()	none
Version other than 0x100/0x200, or wavelet levels other than 0 and 3	Rejected	supports()	Canon CRX version {version:#x}, encoding {encoding}, {planes} planes, {levels} wavelet levels
Bit depth outside 8–16 (the CMP1 parser only accepts 1–16, so 1–7 is what can arrive)	Rejected	supports()	Canon CRX {bits}-bit samples
C-RAW with vertical tiles (tile height below the image height, three levels)	Rejected	supports()	Canon CRX C-RAW with vertical tiles
Version 0x200 that is not a single-tile 14-bit C-RAW	Rejected	supports()	Canon CRX version 0x200 requires a single-tile 14-bit Bayer C-RAW image
Extended CMP1 header with a median bit depth (used by type-3 burst coding)	Rejected	supports()	Canon CRX extended median-bit-depth header
Rounded-plane coding or unexpected plane flags	Rejected	validate_planes()	Canon CRX plane coding flags
Partial-subband coding	Rejected	validate_planes()	Canon CRX partial subband coding
Adaptive quantization gain on a low-frequency band (bands 0–3)	Rejected	validate_planes()	Canon CRX adaptive quantization subband parameters
Uniform quantization value outside 4–44	Rejected	quant_step(), called from validate_planes()	Canon CRX quantization value {value}
Adaptive QP value outside 131–175	Rejected	qp_map()	Canon CRX adaptive QP value {value}
ff11/ff12/ff13 markers in a 0x100 stream	Rejected	layout()	Canon CRX ff11/ff12/ff13 marker family
Marker header of the wrong length (8 bytes expected for ff01, ff02, ff03 and ff12, 16 for ff11 and ff13)	Rejected	layout()	Canon CRX marker {marker:#x} header length {size}
0x200 tile header with a wrong magic, a nonzero reserved field, an empty QP map or QP padding above 7	Rejected	layout()	Canon CRX adaptive quantization tile header
0x200 band header with a nonzero reserved field	Rejected	layout()	Canon CRX adaptive subband reserved field
Container adapter: a track that is not four planes with encoding 0	Rejected	decode() in vendor/cr3.rs	Canon CR3 encoding {encoding} with {planes} planes

supports() also rejects encoding other than 0, a plane count other than 4 and a CFA pattern above 3, but through a CR3 container the adapter rejects the first two before the CRX layer is reached, and the CMP1 parser rejects the third for four-plane tracks. A descriptor the parser cannot accept at all (a zero dimension, a tile larger than the image, a bit depth outside 1–16, a plane count outside 1–4 or a zero header size) is reported as Corrupt (CR3 raw track has an invalid CMP1 descriptor), not as unsupported. A gain on a low-frequency band cannot reach adaptive_step(), which has its own rejection (Canon CRX adaptive low-frequency quantization): validate_planes() refuses it first. That gate is defence in depth and is not tested separately.

Verified sensor decoding

CRX version 0x100, four Bayer planes and ff01/ff02/ff03 marker headers support lossless RAW and three-level C-RAW with horizontal tiles. Uniform quantization values 4–43 are independently verified; 44 continues the sequence (step 102, checked against a measured step on an EOS R50 C-RAW file). Version 0x200 C-RAW supports the ff11/ff12/ff13 marker family, a single 14-bit Bayer tile and its adaptive quantization map. C-RAW is quantized, so next to clipped highlights its reconstruction can overshoot the sensor range by a few quantization steps (up to 36 codes above 16383 in 17 CC0 files); those samples are clamped to the CMP1 bit depth. A lossless sample outside the bit depth is still corrupt data. Other unverified coding variants return explicit unsupported errors (the table above lists them all). Header probing validates the same coding variants and tile/plane layout as full decoding.

crates/raw/tests/cr3_corpus.rs checks every full-sensor sample against a black-box reference, before cropping or colour processing. Public CC0 files are downloaded by cargo xtask corpus --download and kept outside version control. The exact inputs and reference hashes are:

File	Input SHA-256	Sensor FNV-1a (u16 little-endian)
Canon M50 RAW, raw.pixls.us 4657	1ba9ad6b51b315b88820eb0fe5fd7f52bc136ba37b1a5ca76825ebfe25b18058	62261f0ba81cfcd2
Canon M50 C-RAW, raw.pixls.us 2663	15384b775867ec4c42b11882837f1e368cedc0561832ffab271221e6bb80be4c	9aacbfe66f505e1b
Canon R100 RAW, raw.pixls.us 7896	6d83217d58a5e6d2dabcf470430e91a16676b60531c025b81fa7453fc74b0521	cbe5299ab9c52630
Canon R100 C-RAW, raw.pixls.us 7897	0b66842b2fe00329ebc05fe8ab9357ddbbe1a0a2d2e69a2893102de7fdf5c942	341c706b37c38bbf
Canon R8 RAW, raw.pixls.us 6585	7d5c6dbb11ff7e6ee58715d90a20f5d801e8b103f4711ff6ea329ceafcef254c	63c1c6d8d1eb2312
Canon R8 C-RAW, raw.pixls.us 6587	df33cf394573645ce03dea1b2e9f0b5cc2b7734e9e3391ee7114151414cf2812	f836a663a795a375
Canon RP RAW, raw.pixls.us 4674	dcbd0f6f9929de2e2331b0fd10a9d01e7cfd04c5a5e4038456de1647d714cdf2	5cb0f46404b8b663
Canon RP C-RAW, raw.pixls.us 4672	bd3270610593d37ff8a399908bb9406a4e32f9151d55bf19ac1cf8f10d787b46	f48df06ca1d67382
Canon RP RAW, 1.6× crop, raw.pixls.us 4673	7d4ba45dc9264d598336133593c677b09774bcdf13b602ee770e72415a652a16	46808a9de3b3dcc7
Canon RP C-RAW, 1.6× crop, raw.pixls.us 4671	4a859ab137f792aedaf3416b0aad1497ebaab02052a49453902e226699154aa7	39a60c4efed4e1f4

The EOS R5 Mark II files (raw.pixls.us 7881–7884, CC0) are pinned to LightCraft's own decode; no external decoder was run on them:

File	Input SHA-256	Sensor FNV-1a (u16 little-endian)
Canon R5 Mark II RAW, raw.pixls.us 7881	d6e6aa3b493ea8936dff0efb0cc17c87471437e7317bce37c8c82ba08b9cab7b	ff716fb30248496f
Canon R5 Mark II C-RAW, raw.pixls.us 7882	b3c08a5c7a97299dfd58896a12b939e7b43ec78682761812524825e6e5d087be	af32b45357b534e5
Canon R5 Mark II crop-mode RAW, raw.pixls.us 7883	9f88c0ff012924193b7f4497559d133dfe626766d600b5d67689156721739ead	31cf630afe868958
Canon R5 Mark II crop-mode C-RAW, raw.pixls.us 7884	6a597497776a6abbfab8fcf12d0086ac7a3f8afea2879d61accf6bbf48d357d7	4721605b20339332

Reference pixels were observed from the DNGLab 0.8.0 macOS arm64 release binary; no decoder source was read or copied, and it is not shipped or linked. The release ZIP SHA-256 was ee70805cb60f18d5ed62548c4e595f6cee0a33407e15358eb1766a46afc1c16e. The RP references came from the same release's Windows x64 binary (ZIP SHA-256 d3add6b71568bf5f7938468b0b40a0ee1eaec01e0057fe78dcc453188010be9a), after it reproduced the M50 RAW hash above. The RP's 1.6× crop mode writes a single 4032×2656 tile, where full frame (6384×4224) uses two 3192-wide horizontal tiles. All ten sensor comparisons pass. R8 HEVC preview tracks are distinguished from the primary Bayer RAW; the HEVC preview itself is not decoded. Missing corpus files are reported as skipped by the tests.

The version 0x200 QP predictor and entropy framing were checked independently. Controlled input mutations establish floor averaging of paired QP rows before the nonlinear integer table, then multiplication, division by eight, addition of the subband base and a minimum step of one. QP values 131–167 are verified; 168 (quantization value 44, step 102, measured at about 100 on EOS R50 C-RAW files) continues the sequence and is accepted. Other values are rejected.

The QP map is coded as follows (established on the EOS R5 Mark II). Its first symbol is a 32-bit big-endian literal, mapped like every other symbol and added to a prediction of zero. Every later symbol is Rice coded with a limited-length escape: a quotient of 23 or more is written as 23 zeros, the terminating 1 and the symbol in 8 bits. This is the escape layout of ITU-T T.87 for a 32-bit code-length limit and 8-bit symbols, without that standard's minus-one offset. In the R8 maps only the first symbol needs more than 15 leading zeros, and its bits read the same whether taken as a 32-bit literal or as an escape after 16 zeros with a 16-bit literal (the rule LightCraft used before). The R7 maps decoded to their exact ends under that rule, which a later long prefix would have broken; no R7 file was at hand to recheck them. R5 Mark II maps (QP 150–162) also jump by up to 12 where the Rice parameter is 0. That gives 18- to 22-zero prefixes, which the 16-zero rule misread as escapes ("Canon CRX adaptive QP value −21087" and other out-of-range values; the file then opened as a preview). It also gives real escapes, symbols 23 and 24. Escapes were seen only where the Rice parameter is 0 (in 100 of 612 maps; all 351 inspected, up to 10 per map); at a larger parameter they would use the same layout, which is unobserved. With this coding the QP maps of all 33,665 R5 Mark II C-RAW files in a private library (version 0x200, 8480 × 5650) decode to the exact end of their entropy streams, with values 150–162. So do the reduced-size tracks of 306 of those files, the two CC0 R5 Mark II C-RAW files above and the R8 C-RAW fixture; all six fixture hashes are unchanged. Under the 16-zero rule, 174 of those 306 files (57%) failed and opened as previews, all with out-of-range values (none at QP 168). The two CC0 C-RAW files are low-ISO shots whose maps need no long prefix: they decoded under the old rule too, so the escape is covered by synthetic unit tests in crx.rs rather than by a public file. Render cache version 43 redraws thumbnails of files whose decode changed; photos imported as preview-only switch over with Photo ▸ Reload from Disk.

The R5 Mark II sensor has 5650 rows (3574 in crop mode), so its Bayer planes have odd heights (2825, 1787). Lossless planes decode as before. In C-RAW every wavelet level has an odd height (2825 → 1413 → 707), and each subband's entropy stream ends exactly where the subband geometry says. The synthesis uses the same boundary rules that are verified on the R8's odd lengths. Decoded rows show no step down to the last sensor row, and the developed images match the camera's embedded JPEGs at 100 %.

An odd QP-map height (EOS R7: 4732 sensor rows give 1183 QP rows) leaves the last row of the second-level high-frequency bands without a partner row; that row's QP is used on its own. The odd-height map decodes to the exact end of its entropy stream. This rule is not yet checked against a black-box reference: it was checked on paired R7 RAW and C-RAW captures of the same scene (ISO 100 and 6400), whose developed images match visually and whose sensor means agree within 0.1% at ISO 6400. Files with even-height maps never reach this rule, so the six verified fixtures are unchanged. Partial-subband and rounded-plane coding, vertical C-RAW tiling and adaptive low-frequency gains remain unsupported (see the variant table above; cr3_variants.rs pins each rejection). The decoder bounds image dimensions, sample count, tile count, marker headers and temporary allocations. The full sensor buffer is allocated only after the first plane decodes, and plane buffers grow row by row, so a small crafted file fails before reserving memory for the image it claims.

Further bodies: one CC0 file each

All 110 CR3 files on raw.pixls.us (2026-10-12, every one CC0, 31 folders) decode from sensor data; none falls back to the preview, so none of them uses a CRX variant the decoder refuses (vertical C-RAW tiles, partial-subband or rounded-plane coding, multi-tile 0x200, adaptive low-frequency gains) or a CR3 sRAW / mRAW. HEIF stills are separate .HIF files, not CR3. One file per body is pinned in canon_cr3_bodies_decode_like_the_camera_jpeg (crates/raw/tests/cr3_corpus.rs; URLs and SHA-256 in RAW_SAMPLES, xtask/src/main.rs): EOS-1D X Mark III, 90D, 250D, 850D, M200, M50 Mark II, M6 Mark II, R, R3, R5, R6, R6 Mark II, R6 Mark III, R7, R10, RP, R50, R50 V and PowerShot G5 X Mark II, G7 X Mark III, SX70 HS and V1, C-RAW where the body has a CC0 C-RAW sample. No external decoder was run: the sensor hashes pin LightCraft's own decode, and the check is black-box against the camera:

• the green sites of the active area, on a 24 × 16 grid, follow the camera's own embedded JPEG (gamma-encoded Pearson r 0.93–0.99; 0.83 for the M6 Mark II and 0.71 for the G7 X Mark III, whose JPEGs are strongly distortion-corrected; a misread stream gives r near 0);
• each render was inspected at 100 % for tile seams, band or quantiser artefacts (none);
• where raw.pixls.us has RAW and C-RAW shots of one scene, their black-subtracted sensor means correlate on 16 × 16 blocks at 0.99–0.995 (R, R6, 250D, R50, G5 X Mark II, R5 crop mode) and 0.97 (RP); the two R5 full-frame shots correlate at only 0.83, though each follows its own camera JPEG at r 0.98, so the shots differ, not the decodes. The shots differ in exposure, so the means are not compared.

The EOS R6 Mark III (ColorData version 66) reads its as-shot white balance and black level as described at the top of this page; its white level comes from the data.

Not every C-RAW file of a verified body decodes: the decoder accepts adaptive QP values 131–175 only. The 3 of 40 EOS R6 Mark II C-RAW files with QP 172 or 175 a user reported (they opened as their preview with "Canon CRX adaptive QP value 172") now decode (#1694). EOS R7 C-RAW (the odd-height QP map above) has only been checked on six paired RAW / C-RAW captures; the pinned R7 file is lossless, so R7 C-RAW still has no black-box reference.

White level

The white level is Canon's specular white from ColorData (the word after the normal white level), not the sensor's saturation point. On the RP at ISO 100 it is 14558 while samples clip at 16383. At the −⅓-stop ISOs, which pull a higher analog ISO down digitally, it drops further: 11062 at ISO 5000, where red saturates near 13668. Samples above the white level render as clipped. Whether Lightroom recovers them has not been measured.

Colour limits

CR3 carries as-shot white balance but no measured camera matrix is imported here. The existing guarded embedded-JPEG fitting path now includes CR3, with both proxies oriented identically before gathering training pairs. A bounded crop/translation registration of the JPEG is confirmed on held-out edge directions before fitting colour; the existing held-out colour acceptance gates are unchanged. No lens distortion correction is applied (LightCraft has no lens profiles of its own yet), so lenses whose camera JPEG is strongly distortion-corrected may fail the gates and keep the neutral matrix. Render cache version 13 invalidates earlier thumbnails. All developed pixels still come from the RAW sensor; a rejected colour fit retains the documented neutral matrix fallback. See camera-preview-colour.md for the limits of this estimate.