matthewtrahan 322e20ea7e resin pins: break at the part's surface (#309) -- each pin narrows across the gap from its 0.4 mm square to a 0.25 mm contact tip (pinTipW) where it meets the part, like a resin slicer's support, so it snaps there rather than partway down or by tearing a chip out; and Pin depth defaults to 0.1 mm, not 0.3: resin presets sink a tip 0-0.2 mm (Lychee 0, Titancraft 0.07), and the tester's small front walls needed a tool to come off. The field's tooltip says why (site, options.json -> every plugin dialog, zh/pt). FDM sweep 864/864 byte-identical

2026-10-21 08:54:38 -05:00

..

bridge.js

plugins/shared: the bridge exports reportLine, for a host whose dialog is a web page (SolidWorks) to show the shared result line; every other export unchanged

2026-10-05 20:51:22 -05:00

draw_entry.js

tall ribs: walls over 10 cm get face ribs at the plate (Brace tall walls, on) -- a user: fins taller than 10 cm wobble; Auto, Full and Draw, last around every support, kept sideClear off the part and other supports

2026-10-16 14:31:03 -05:00

fins_entry.js

plugins: Placement mode (Auto / Full coverage) and Long walls in options.json -- every plugin dialog, the CLI (--mode full, --no-long-walls) and MCP can run Full coverage, which they couldn't (a user's wide roof parts got a handful of walls in Auto; Full holds most of them); Auto stays the default; Full builds at the default coverage as the site does, so the slider hides there and Long walls shows only in Full; labelled "Placement mode" since FreeCAD names a property after its label and every FreeCAD object already has a Placement, and its add-on now refuses such a label

2026-10-19 09:31:08 -05:00

options.json

resin pins: break at the part's surface (#309) -- each pin narrows across the gap from its 0.4 mm square to a 0.25 mm contact tip (pinTipW) where it meets the part, like a resin slicer's support, so it snaps there rather than partway down or by tearing a chip out; and Pin depth defaults to 0.1 mm, not 0.3: resin presets sink a tip 0-0.2 mm (Lychee 0, Titancraft 0.07), and the tester's small front walls needed a tool to come off. The field's tooltip says why (site, options.json -> every plugin dialog, zh/pt). FDM sweep 864/864 byte-identical

2026-10-21 08:54:38 -05:00

report.js

plugins: Direction and Pin depth in options.json, so every dialog, the CLI (--tine-dir, --pin-depth) and the MCP server offer resin pins; the report says pins (#309)

2026-10-17 09:47:53 -05:00

seat.js

resin pins: break at the part's surface (#309) -- each pin narrows across the gap from its 0.4 mm square to a 0.25 mm contact tip (pinTipW) where it meets the part, like a resin slicer's support, so it snaps there rather than partway down or by tearing a chip out; and Pin depth defaults to 0.1 mm, not 0.3: resin presets sink a tip 0-0.2 mm (Lychee 0, Titancraft 0.07), and the tester's small front walls needed a tool to come off. The field's tooltip says why (site, options.json -> every plugin dialog, zh/pt). FDM sweep 864/864 byte-identical

2026-10-21 08:54:38 -05:00