matthewtrahan 26c3b3b5c3 engine: curved walls (#25) -- with opts.curvedWalls, a region whose downhill walls bend past 20 deg swaps when they hold as much, at any weight; unset, the race is unchanged

2026-10-17 09:51:28 -05:00

..

negative-parts

3mf: PrusaSlicer 3's part types (PrusaSlicer3_project.json) are read too, and the three slicers' own files are pinned -- a cube with a negative cube saved by Bambu Studio, OrcaSlicer and PrusaSlicer 3, stripped to the model and the part-type config

2026-10-14 20:21:26 -05:00

bowl.stl

prototype: drop the generated example models -- probe runs on real/; bowl/dome/torus become raster test fixtures

2026-09-28 08:14:34 -05:00

bracket.step

import: open STEP files (#24)

2026-09-24 16:15:26 -05:00

dome_ceiling.stl

prototype: drop the generated example models -- probe runs on real/; bowl/dome/torus become raster test fixtures

2026-09-28 08:14:34 -05:00

gen_curved.py

prototype: drop the generated example models -- probe runs on real/; bowl/dome/torus become raster test fixtures

2026-09-28 08:14:34 -05:00

issue25_curve.stl

engine: downhill walls -- walls that run down an overhang and follow it to the plate (#25)

2026-10-13 16:24:35 -05:00

issue25_spiral.stl

engine: curved walls (#25) -- with opts.curvedWalls, a region whose downhill walls bend past 20 deg swaps when they hold as much, at any weight; unset, the race is unchanged

2026-10-17 09:51:28 -05:00

torus_flat.stl

prototype: drop the generated example models -- probe runs on real/; bowl/dome/torus become raster test fixtures

2026-09-28 08:14:34 -05:00

two-bodies.step

import: open STEP files (#24)

2026-09-24 16:15:26 -05:00