matthewtrahan 736cf9e5d1 section view (#250): a plane you move and turn hides the part and its supports on one side, so the inside of a bore can be seen and drawn on -- clicks reach only what is shown, the cut faces paint flat slate, Flip / X / Y / Z snap it through the part; view only, never exported or saved

2026-10-14 13:07:13 -05:00

..

bridge.test.js

draw: lines down to 2 mm, and squat walls when no full wall fits -- on the part with 0.6 mm of room, on the plate (only over clear plate) as a brimmed stem; tried after both full walls fail, so every line that built before builds the same (local issue 011)

2026-10-04 14:09:50 -05:00

draw_entry.test.js

plugins: the Material option becomes the site's Support gap -- PLA's pad numbers, a 0.1-0.4 gap field in every dialog, Cura's Match Cura and Onshape's PLA/PETG/Custom go

2026-10-14 07:54:03 -05:00

entry_options.test.js

plugins: the Material option becomes the site's Support gap -- PLA's pad numbers, a 0.1-0.4 gap field in every dialog, Cura's Match Cura and Onshape's PLA/PETG/Custom go

2026-10-14 07:54:03 -05:00

entry.test.js

engine: let a plugin ask for sway braces

2026-09-30 08:11:47 -05:00

options.test.js

section view (#250): a plane you move and turn hides the part and its supports on one side, so the inside of a bore can be seen and drawn on -- clicks reach only what is shown, the cut faces paint flat slate, Flip / X / Y / Z snap it through the part; view only, never exported or saved

2026-10-14 13:07:13 -05:00

pieces.test.js

shared: review fixes -- overFaces is the site's red (kept), smallFaces its amber; draw tests compare coordinates

2026-10-01 08:32:48 -05:00

sensitivity_repro.js

plugins: move the engine bridge and bundle step into plugins/shared (step 1 of one engine for every plugin)

2026-09-25 16:18:40 -05:00