support-fins

calibration

calibration: cutout coupon print files (two objects in register, the site's 3MF form), render and Calibrate estimate (61 min, 24 g); the all-coupons plate notes cutout and sampler print on their own (full at 238 x 235)

2026-10-07 11:14:18 -05:00

fins

wall lines: review fixes -- a thick wedge reads its edges' underside, not just the centreline (0.45 mm into a tilted cylinder at 8 lines); a squat brim stays under half the row spacing; a session saved before Wall lines loads at 2

2026-10-14 08:41:44 -05:00

i18n

section view (#250 ): a plane you move and turn hides the part and its supports on one side, so the inside of a bore can be seen and drawn on -- clicks reach only what is shown, the cut faces paint flat slate, Flip / X / Y / Z snap it through the part; view only, never exported or saved

2026-10-14 13:07:13 -05:00

prop

nozzle: a free edge's outermost row steps in as the tip widens -- at 2.0 the 3 mm tip and its 2.5 mm tines hung 1.2 mm past a cube's side (X30), tabs out of the wall instead of under the part

2026-10-14 12:30:30 -05:00

ui

section view: review fixes -- a tap on the plane's handle no longer falls through to a pick (the handle clears its axis on release before app.js reads it, so the press is remembered); Move shows one arrow along the cut's normal; the cut turns and reseats with the part

2026-10-14 13:07:13 -05:00

vendor

import: load the STEP kernel while the user picks a file, cache it a year

2026-09-24 16:15:26 -05:00

_headers

import: load the STEP kernel while the user picks a file, cache it a year

2026-09-24 16:15:26 -05:00

_redirects

Make the controls readable and drop the Brace mode

2026-07-30 13:55:26 -05:00

.gitkeep

Initial commit: fin spec, prototype, project skeleton

2026-07-24 19:25:22 -05:00

app.js

section view: review fixes -- a tap on the plane's handle no longer falls through to a pick (the handle clears its axis on release before app.js reads it, so the press is remembered); Move shows one arrow along the cut's normal; the cut turns and reseats with the part

2026-10-14 13:07:13 -05:00

apple-touch-icon.png

site: add fin logo — favicon set + brand mark (generator in assets/)

2026-08-24 19:12:03 -05:00

cutout.js

Interface material: wall crests + tines as their own 3MF object for a toolchanger (#21 ) (#205 )

2026-10-09 22:00:37 -05:00

draw.js

draw: surface queries through the XY grid -- Full builds 4-5x faster on dense minis (#226 )

2026-10-09 22:09:44 -05:00

favicon-32.png

site: add fin logo — favicon set + brand mark (generator in assets/)

2026-08-24 19:12:03 -05:00

favicon.svg

site: add fin logo — favicon set + brand mark (generator in assets/)

2026-08-24 19:12:03 -05:00

fins.js

nozzle: a Wall lines setting (2/4/6/8) -- thicker walls, wedges and braces for a tall part or a big printer; the tip and tines stay one line

2026-10-14 08:41:44 -05:00

finworker.js

comments: point prop.js mentions at the web/prop/ module that owns the code

2026-09-26 17:46:36 -05:00

index.html

section view (#250 ): a plane you move and turn hides the part and its supports on one side, so the inside of a bore can be seen and drawn on -- clicks reach only what is shown, the cut faces paint flat slate, Flip / X / Y / Z snap it through the part; view only, never exported or saved

2026-10-14 13:07:13 -05:00

inside.js

engine: the weld check no longer reads an edge lying in a wall's end-cap plane as a pierce -- segTriHit's parallel test is relative to the lengths, not an absolute 1e-12 (local issue 023: cube X40 lost 2 stations a wall under a 1e-9 nudge; nudge flips 9 -> 1 of 26); walls the false weld cut short or dropped now build

2026-10-03 20:46:32 -05:00

kiss.js

sway kiss: say where kissEnds measures from for each caller (review)

2026-10-03 15:14:03 -05:00

materials.js

engine: sway brace tines kiss the part's face (kissEnds), and the material's tine bite is gone -- one SWAY.tineReach 0.3 gates placement; Material tooltip no longer claims PETG shrinks a bite; same braces and tines on 16 cases x PLA/PETG, slices identical on 30 of 32 (lighthouse Y90 notch: +-0.13 mm2)

2026-10-03 15:14:03 -05:00

nozzle.js

nozzle: a free edge's outermost row steps in as the tip widens -- at 2.0 the 3 mm tip and its 2.5 mm tines hung 1.2 mm past a cube's side (X30), tabs out of the wall instead of under the part

2026-10-14 12:30:30 -05:00

orient.js

refactor: decouple orient.js from UI i18n and deduplicate translation key (#222 )

2026-10-09 17:58:14 -05:00

overhangs.js

engine: floatingPieces moves to web/pieces.js; plainer readout line

2026-09-27 13:48:23 -05:00

pieces.js

engine: floatingPieces moves to web/pieces.js; plainer readout line

2026-09-27 13:48:23 -05:00

planes.js

comments: say the leaning-fin code they cite is gone

2026-09-27 07:58:51 -05:00

prop.js

engine: downhill walls -- walls that run down an overhang and follow it to the plate (#25 )

2026-10-13 16:24:35 -05:00

solids.js

refactor: kissEnds moves to web/kiss.js (reach and widths as arguments) and loftExtrude to solids.js, so the sway braces can share them; output identical

2026-10-03 15:14:03 -05:00

step.js

import: load the STEP kernel while the user picks a file, cache it a year

2026-09-24 16:15:26 -05:00

stepworker.js

import: load the STEP kernel while the user picks a file, cache it a year

2026-09-24 16:15:26 -05:00

stl.js

stl: review fixes -- bytes after the last triangle still read as binary, keywords any case, solid_name headers

2026-09-30 14:33:13 -05:00

style.css

section view (#250 ): a plane you move and turn hides the part and its supports on one side, so the inside of a bore can be seen and drawn on -- clicks reach only what is shown, the cut faces paint flat slate, Flip / X / Y / Z snap it through the part; view only, never exported or saved

2026-10-14 13:07:13 -05:00

sway.js

Allow optional Sway depth beyond the existing 60 mm cap (#241 )

2026-10-13 07:38:43 -05:00

threemf.js

Interface material: wall crests + tines as their own 3MF object for a toolchanger (#21 ) (#205 )

2026-10-09 22:00:37 -05:00

zip.js

3mf: open a 3MF

2026-09-22 09:00:52 +02:00