matthewtrahan de94a63a73 web: a Curved walls checkbox (Auto and Full, off by default) -- undoable, saved with the session; the plugins leave it out until the print test

2026-10-17 09:51:28 -05:00

..

blender

plugins: Direction and Pin depth in options.json, so every dialog, the CLI (--tine-dir, --pin-depth) and the MCP server offer resin pins; the report says pins (#309)

2026-10-17 09:47:53 -05:00

cli

cli: .obj input, --object picks from a multi-object OBJ as from a 3MF plate; the MCP server's path says so

2026-10-16 10:00:56 -05:00

cura

plugins: gap review fixes -- Blender's float32 gap at 0.4 is in range, Onshape's gap bounds are the site's 0.1-0.4, Cura README

2026-10-14 07:54:03 -05:00

freecad

plugins: Direction and Pin depth in options.json, so every dialog, the CLI (--tine-dir, --pin-depth) and the MCP server offer resin pins; the report says pins (#309)

2026-10-17 09:47:53 -05:00

fusion

engine: sway brace tines kiss the part's face (kissEnds), and the material's tine bite is gone -- one SWAY.tineReach 0.3 gates placement; Material tooltip no longer claims PETG shrinks a bite; same braces and tines on 16 cases x PLA/PETG, slices identical on 30 of 32 (lighthouse Y90 notch: +-0.13 mm2)

2026-10-03 15:14:03 -05:00

mcp

cli: .obj input, --object picks from a multi-object OBJ as from a 3MF plate; the MCP server's path says so

2026-10-16 10:00:56 -05:00

onshape

plugins: gap review fixes -- Blender's float32 gap at 0.4 is in range, Onshape's gap bounds are the site's 0.1-0.4, Cura README

2026-10-14 07:54:03 -05:00

orca

orca: review fix -- fins that reach no layer say nothing was added, not N walls

2026-10-01 07:33:44 -05:00

prusa

plugins: the Material option becomes the site's Support gap -- PLA's pad numbers, a 0.1-0.4 gap field in every dialog, Cura's Match Cura and Onshape's PLA/PETG/Custom go

2026-10-14 07:54:03 -05:00

shared

web: a Curved walls checkbox (Auto and Full, off by default) -- undoable, saved with the session; the plugins leave it out until the print test

2026-10-17 09:51:28 -05:00

solidworks

plugins: the Material option becomes the site's Support gap -- PLA's pad numbers, a 0.1-0.4 gap field in every dialog, Cura's Match Cura and Onshape's PLA/PETG/Custom go

2026-10-14 07:54:03 -05:00