matthewtrahan 64f7fb7d61 sway: review fixes -- the Tine contact offset field is gone (a positive offset lifts the tines off the part, zero meets it flush; the engine keeps its -0.01 default, the same output as main), Brace walls above starts at 5 cm, tests pin a full-height hand brace, the low-click reason and the cross ribs at the page's settings (two per brace over the start height, closed, clear of the part, no brace or tine lost), and the new and changed strings in de, nl, pt, ar and zh

2026-10-18 15:36:14 -05:00

..

blender

plugins: Direction and Pin depth in options.json, so every dialog, the CLI (--tine-dir, --pin-depth) and the MCP server offer resin pins; the report says pins (#309)

2026-10-17 09:47:53 -05:00

cli

cli: .obj input, --object picks from a multi-object OBJ as from a 3MF plate; the MCP server's path says so

2026-10-16 10:00:56 -05:00

cura

plugins: gap review fixes -- Blender's float32 gap at 0.4 is in range, Onshape's gap bounds are the site's 0.1-0.4, Cura README

2026-10-14 07:54:03 -05:00

freecad

plugins: Direction and Pin depth in options.json, so every dialog, the CLI (--tine-dir, --pin-depth) and the MCP server offer resin pins; the report says pins (#309)

2026-10-17 09:47:53 -05:00

fusion

engine: sway brace tines kiss the part's face (kissEnds), and the material's tine bite is gone -- one SWAY.tineReach 0.3 gates placement; Material tooltip no longer claims PETG shrinks a bite; same braces and tines on 16 cases x PLA/PETG, slices identical on 30 of 32 (lighthouse Y90 notch: +-0.13 mm2)

2026-10-03 15:14:03 -05:00

mcp

cli: .obj input, --object picks from a multi-object OBJ as from a 3MF plate; the MCP server's path says so

2026-10-16 10:00:56 -05:00

onshape

plugins: gap review fixes -- Blender's float32 gap at 0.4 is in range, Onshape's gap bounds are the site's 0.1-0.4, Cura README

2026-10-14 07:54:03 -05:00

orca

orca: review fix -- fins that reach no layer say nothing was added, not N walls

2026-10-01 07:33:44 -05:00

prusa

plugins: the Material option becomes the site's Support gap -- PLA's pad numbers, a 0.1-0.4 gap field in every dialog, Cura's Match Cura and Onshape's PLA/PETG/Custom go

2026-10-14 07:54:03 -05:00

rhino

rhino: README says beta -- what's been run in a real Rhino 8 (smoke test, the installed .yak's SupportFins) and what hasn't (the settings dialog, Draw's clicks, slicing an export, Windows)

2026-10-18 15:34:39 -05:00

shared

sway: review fixes -- the Tine contact offset field is gone (a positive offset lifts the tines off the part, zero meets it flush; the engine keeps its -0.01 default, the same output as main), Brace walls above starts at 5 cm, tests pin a full-height hand brace, the low-click reason and the cross ribs at the page's settings (two per brace over the start height, closed, clear of the part, no brace or tine lost), and the new and changed strings in de, nl, pt, ar and zh

2026-10-18 15:36:14 -05:00

solidworks

plugins: the Material option becomes the site's Support gap -- PLA's pad numbers, a 0.1-0.4 gap field in every dialog, Cura's Match Cura and Onshape's PLA/PETG/Custom go

2026-10-14 07:54:03 -05:00