matthewtrahan dfcaa5c1b9 tall ribs: walls over 10 cm get face ribs at the plate (Brace tall walls, on) -- a user: fins taller than 10 cm wobble; Auto, Full and Draw, last around every support, kept sideClear off the part and other supports

2026-10-16 14:31:03 -05:00

..

calibration

tall ribs: walls over 10 cm get face ribs at the plate (Brace tall walls, on) -- a user: fins taller than 10 cm wobble; Auto, Full and Draw, last around every support, kept sideClear off the part and other supports

2026-10-16 14:31:03 -05:00

examples

probe: --opts merges extra buildFins options into each build

2026-10-13 16:24:35 -05:00

fill-rows

prototype: fill rows -- parallel rows along one heading, each row's longest buildable pieces by Draw's builder; Isaac must-hold 76 -> 89% (11 walls, 2.6 -> 4.3 g), mixed on other figures

2026-10-16 08:41:38 -05:00

stress

ci: run the Deno test suite on every PR and push to main (#39)

2026-09-23 08:30:21 -05:00

sweep

engine: raster swap's grip rule scales with height -- max(0.1 mm, 5% of the grip's z); compare.js matches

2026-09-30 18:31:14 -05:00

ui-smoke

rotate: a ring drag with the Rotate popover folded shows its angle in a small label above the Rotate badge (the turn so far, then the pose), fading 1.2 s after release -- the readout moved into the popover in #286, so a drag showed no angle; ui-smoke's ring drag now drives the rotate gizmo (it found the Section plane's)

2026-10-15 18:42:46 -05:00

check_gcode.py

Keep fins apart in space, count them in the fit, and slice one

2026-07-25 09:28:58 -05:00

check_stl.py

check_stl: review fixes -- the inside depth comes from the standoff pass's own samples (a second sampling doubled the judge on big parts: voron housing +269 s), check_props signs its samples with a ray test, and the 0.2 mm is called a sampling tolerance

2026-10-16 14:17:31 -05:00

combined_proto.js

prototype: drop why_no_fin.js; verify_fins.js defaults to auto

2026-09-27 07:58:51 -05:00

debug_patches.js

Stand the fin beside the part and give it tines (M4 geometry)

2026-07-25 08:32:10 -05:00

footcheck.js

prototype: footcheck --web takes a relative path (review)

2026-10-05 07:46:28 -05:00

probe_straightness.js

Split regions into straight sub-patches and rows of walls (M5a, M5b, M6b)

2026-07-29 14:10:42 -05:00

probe_tines2.py

Add roadmap; correct the overhang threshold; measure where tines can go

2026-07-24 20:55:29 -05:00

probe_tines3.py

Add roadmap; correct the overhang threshold; measure where tines can go

2026-07-24 20:55:29 -05:00

probe_tines.py

Add roadmap; correct the overhang threshold; measure where tines can go

2026-07-24 20:55:29 -05:00

spike_arrow.py

Initial commit: fin spec, prototype, project skeleton

2026-07-24 19:25:22 -05:00

spike_fins.py

Add roadmap; correct the overhang threshold; measure where tines can go

2026-07-24 20:55:29 -05:00

spike_orient.py

Add roadmap; correct the overhang threshold; measure where tines can go

2026-07-24 20:55:29 -05:00

spike_overhangs.py

Add roadmap; correct the overhang threshold; measure where tines can go

2026-07-24 20:55:29 -05:00

verify_fins.js

prototype: drop why_no_fin.js; verify_fins.js defaults to auto

2026-09-27 07:58:51 -05:00