matthewtrahan 322e20ea7e resin pins: break at the part's surface (#309) -- each pin narrows across the gap from its 0.4 mm square to a 0.25 mm contact tip (pinTipW) where it meets the part, like a resin slicer's support, so it snaps there rather than partway down or by tearing a chip out; and Pin depth defaults to 0.1 mm, not 0.3: resin presets sink a tip 0-0.2 mm (Lychee 0, Titancraft 0.07), and the tester's small front walls needed a tool to come off. The field's tooltip says why (site, options.json -> every plugin dialog, zh/pt). FDM sweep 864/864 byte-identical

2026-10-21 08:54:38 -05:00

..

CALIBRATION.md

ui text review fixes -- Cutouts sit below the Tines section, not under Placement (the Tines section comes between them); German Draw note reads 'Klicken Sie auf zwei Punkte'

2026-10-18 22:29:01 -05:00

FIN-SPEC.md

resin pins: break at the part's surface (#309) -- each pin narrows across the gap from its 0.4 mm square to a 0.25 mm contact tip (pinTipW) where it meets the part, like a resin slicer's support, so it snaps there rather than partway down or by tearing a chip out; and Pin depth defaults to 0.1 mm, not 0.3: resin presets sink a tip 0-0.2 mm (Lychee 0, Titancraft 0.07), and the tester's small front walls needed a tool to come off. The field's tooltip says why (site, options.json -> every plugin dialog, zh/pt). FDM sweep 864/864 byte-identical

2026-10-21 08:54:38 -05:00

IMPLEMENTATION-PLAN.md

fins: fins.js is the entry point; map web/fins/ in its header

2026-09-27 09:05:38 -05:00

NOZZLE.md

nozzle: review fixes -- the tine reach grows past a wider contact tip (sphere at 45deg: 6 tines at 2.0, now 26; 30 at 0.4), walls stop at 6 mm so a row never fuses, nozzles to 2.0

2026-10-14 12:30:30 -05:00

PERFORMANCE-SPEC.md

fins: fins.js is the entry point; map web/fins/ in its header

2026-09-27 09:05:38 -05:00

REVIEW-2026-07-24.md

Act on the M4 code review: timing line, sliver guard, STL header

2026-07-25 08:33:27 -05:00

ROADMAP.md

Reach python parity on the shelter hub: pad-seated points, one wall per tube

2026-07-29 19:29:35 -05:00