mirror of
https://github.com/Klipper4FlashForge/firmware.git
synced 2026-10-22 13:22:16 -05:00
worktree-timelapse-test-gcode
4
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Oleksandr ShyshatskyiandClaude Opus 5
|
2e9f2214a0 |
Merge master into the comment trim
Master moved twelve commits while this branch ran: patch.sh became
payload.sh, run-pre.sh and run-append.sh became runFirmwareExe.sh, the
install manifest and anvil.conf are gone, and versions.env was trimmed
harder there than here (53 comment lines against 185).
Resolved so the merge contributes comments and nothing else. Verified
mechanically: every one of the 270 files in the tree now carries
exactly master's code, and no file this branch touched is resurrected.
- master's deletions accepted: bin/patch.sh, bin/verify.sh,
installer/run-{pre,append}.sh, anvil.conf.in
- versions.env: master's, which is the better trim
- 26 files master only renamed through: this branch's trim kept, with
patch.sh -> payload.sh applied
- 14 files master rewrote to describe the new installer: master's
text taken wholesale, to be re-trimmed separately
- stale references to the manifest and run-append.sh corrected in
pkgs/3rdparty/busybox/build.sh and pkgs/moonraker/build.sh
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NMMpQTajN7RDJySrhQ2cTE
|
||
|
Oleksandr ShyshatskyiandClaude Opus 5
|
b98552386b |
No FlashForge component ships; patch.sh is payload.sh
The software component existed to give the mod one exec hook. It is not needed for that any more, so a release now carries our installer and our payload and nothing else: 26MB smaller, 21MB of which was FlashForge's own firmwareExe travelling back to the partition it was already on, along with their klippy tree, their wifi module and their configs. WHAT IT GIVES BACK. /usr/prog/PROGRAM/software is no longer rewritten, so the version directory there stays FlashForge's with their genuine firmwareExe inside it -- and app_startup.sh's five-second watchdog, which copies one out of that directory when nothing by that name is running, has something to copy again. A printer whose payload fails to install now comes up on the stock UI instead of a blank screen. That recovery has been broken since we started deleting their binary out of a component we shipped; docs/how-it-works.md claimed it worked throughout. THE ROOT PASSWORD moves with it, because it used to ride in the component's shadow file. bin/pack.sh bakes ROOT_PW_HASH into the installer, single-quoted -- an unquoted $6$... would have the printer's shell expand $6 as a positional parameter and ship a truncated hash -- and the installer writes it to /usr/prog/etc/shadow. The random-password path asks one question instead of four: FlashForge ship the same root hash on every machine, so a live shadow still carrying it means nobody has set a password and it is ours to set. The .prev-root-hash recording, the shipped-vs-live comparison and the restore-it- afterwards step were all machinery for surviving a file that nothing overwrites any more, and are gone. pack.sh checks the hardcoded constant against the stock package it built from, because getting it wrong is silent and total: every printer would read as "already set" and none would ever get a password. bin/patch.sh is bin/payload.sh. It patched nothing any more -- no splice, no shadow edit, no firmwareExe deletion -- and what is left is the payload: the feed installed by the printer's own opkg, the seeded config, the manifest. Its sections are renumbered 1-5 with no gaps, and the five tombstone comments marking where removed sections used to be are gone with them. test_recipe_layout.py loses six of its nine tests. Each compared the tree against a description of the tree -- no fourth directory kind, each kind still used, 3rdparty carries no files of ours, installer/ holds exactly two named files -- and none could go red for a reason a printer would notice, while all six went red the moment the layout legitimately changed. The two that bite are kept: a payload/ path escaping $MODDIR, and a recipe name at both levels, which makes pkg_dir silently build the wrong package. SW_VER is deleted from config.env.example and both workflows: it stamped a component that is not built. Gates: 112 static tests pass. The generated installer is verified after substitution -- all four lines present, and `sh -n` over the result, because a hash with a stray character in it would otherwise reach a printer as a syntax error whose only symptom is a package that installs nothing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01CH7Yb4wuPhnppHAB25UX7e |
||
|
Oleksandr ShyshatskyiandClaude Opus 5
|
9b5b562a22 |
Comments: keep the contract and the trap, drop the narration
A sweep over every commented file in the tree. What is kept is what a reader needs to change the code safely: what a thing is, its signature, the invariants other files depend on, and the traps that fail silently (find's non-zero exit under set -e, s6's baked-in libexecdir, the -lm that decides whether _sqlite3 exists, opkg's compile-time prefix). What goes is the narration around it: incident histories, arguments against alternatives already rejected, restatements of the code below, and paragraphs re-explaining a rule three files already state. One paragraph in pkgs/3rdparty/opkg/build.sh was duplicated outright. Comment lines 7971 -> 6158. Every change is comment-only: no non-comment line differs anywhere in the 86 files, checked mechanically. Commented-out config directives (#fast_feed: 30000 and friends) are documentation of defaults and are kept. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NMMpQTajN7RDJySrhQ2cTE |
||
|
Oleksandr ShyshatskyiandClaude Opus 5
|
f67e7a269f |
ls pkg/ was thirty-eight entries and four of them mattered
pkg/ -> pkgs/, and the thirty-four recipes that build a pinned tarball and
carry no files of this repo move down a level into pkgs/3rdparty/. What is
left at the top is the four components a person actually edits: anvil-core,
klipper, moonraker, helixscreen.
THE LINE IS MECHANICAL, NOT EDITORIAL, and that is why it can be a directory
rather than a field in pkg.conf. "Do we actively modify it" drifts -- the day
somebody patches zlib nobody would agree which side it belongs on, and the
answer would be a rename touching CI and docs decided by taste. "Does it carry
files of ours" is a fact about the tree: it is exactly whether the recipe has
a payload/, prog/ or seed/, checkable in one assertion, and
test_recipe_layout.py now demands the move in both directions -- a 3rdparty
recipe that grows one of the three must come up, and a top-level recipe with
none of them must go down, or the top level slowly refills and the split stops
meaning anything.
ONE FUNCTION KNOWS THE TWO DEPTHS. pkgs/lib.sh's pkg_dir resolves a recipe id
to its directory and nothing else spells either path -- not a recipe, not
bin/build-packages.sh, not a test. Names stay unique across both levels
because pkg_out, pkg_stamp and the .ipk filename are all keyed by the bare
name; a duplicate would resolve to whichever level is searched first and
build the wrong thing silently, so that is a test too.
Recipes now source `. ./bin/common.sh` instead of counting `..` from $0.
Depth-counting would have needed two spellings for two levels, and it was
never buying anything: `. pkg/lib.sh` on the next line already required the
working directory to be the repo root.
A SECOND SILENT-SHRINK BUG, and this one was live. qa/static's _files()
expanded a list of globs and returned whatever matched, so "pkgs/*/build.sh"
quietly stopped covering thirty-four recipes the moment they moved -- the lane
stayed green, and the only visible sign was a test count dropping by 34 in a
run nobody was counting. _files() now refuses a pattern that matches nothing.
That is the same failure the ash-compatibility check had a guard for and the
syntax check did not, which is why the guard reads the way it does.
AND ONE PACKAGE WAS SHIPPING PYTHON BYTECODE. anvil-core stages a directory of
.py helpers wholesale, so any test that imported one left a __pycache__ beside
it -- gitignored, invisible in a diff, copied by cp -a like anything else. The
package's contents depended on whether pytest had been run on the machine that
built it: two builds of one commit, different sha256, cause nowhere in the
tree. What it shipped was worthless as well as unstable, compiled by the build
image's python 3.11 for a printer running the 3.13 this repo cross-builds. The
sweep is in pkg_ship now, once, and the two hand-written copies in
pkgs/klipper and pkgs/moonraker are deleted -- the trap is set for any recipe
that stages a tree of .py files, and the two recipes that had hit it had each
solved it locally while the third, which had not, was the one shipping.
Measured:
* the rename changes no package bytes. Same cached build trees, feed built
with the diff stashed and unstashed: all 41 .ipk match.
* with the bytecode sweep, anvil-core returns to exactly the bytes the
previous commit produced.
* no package in the feed contains a .pyc or a __pycache__.
* make qa-static: 247 passed (236 before this work + 11 layout tests).
* make test: 8 passed, 0 failed, including unpack/patch/pack/verify on the
synthetic stock package. make test-py: 181 passed.
Not explained: anvil-python-dev produced two different sha256 from an
UNCHANGED work/pkg/python at two points today, under code that was identical
both times -- so it is not reproducible from a cached tree, and it is not this
commit's doing (the stashed and unstashed builds above agree on it). Worth a
look; the dev split in bin/build-packages.sh is where to start.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|