Commit Graph

Select branches

Hide Pull Requests

afc-migration

assign-tool

master

restore-stock-klipper-hooks

worktree-adopt-installer

worktree-docs-pa-calibration-catchup

worktree-max-residual-default

worktree-timelapse-test-gcode

#1

#10

#11

#12

#13

#14

#15

#16

#17

#18

#18/merge

#19

#2

#20

#21

#22

#23

#24

#25

#26

#26/merge

#27

#27/merge

#29

#3

#31

#32

#35

#35/merge

#4

#40

#40/merge

#5

#6

#7

#8

#9

v20260825-nova-kakhovka

v20260825b-nova-kakhovka

v20260827-melitopol

v20260827b-melitopol

v20260827c-melitopol

v20260827d-melitopol

v20260827e-melitopol

v20260827f-melitopol

Mono Color

• 91945be138 Soften toolchange accel to 8640 and add TOOLCHANGE_TEST afc-migration Oleksandr ShyshatskyiandClaude Opus 5.5 2026-10-18 09:06:56 +03:00
• 186028a5e1 Make the tuned dock motion the only one Oleksandr ShyshatskyiandClaude Opus 5.5 2026-10-18 08:52:45 +03:00
• 3865e30238 Tune toolchange motion on hardware: soft docking, arc lane entry Oleksandr ShyshatskyiandClaude Opus 5.5 2026-10-18 08:47:11 +03:00
• 60496eb660 Optimize guarded toolchange motion and gear acceleration Oleksandr Shyshatskyi 2026-10-12 12:21:16 +03:00
• 565d5753a0 Remove the shared-stepper adapter Oleksandr ShyshatskyiandClaude Sonnet 5.5 2026-10-03 18:07:59 +03:00
• df57d2795e Remove the shared-stepper adapter master Oleksandr ShyshatskyiandClaude Sonnet 5.5 2026-10-03 18:07:59 +03:00
• d3b0df7212 Drop the next-tool preheat from ADAPTIVE_MESH Oleksandr ShyshatskyiandClaude Sonnet 5.5 2026-10-03 17:28:18 +03:00
• 308d97ef21 Add optional Z-hop and in-dock retract to the return after a tool change 3 people 2026-10-03 17:30:49 +03:00
• 7e8ea9dbf4 Drop the next-tool preheat from ADAPTIVE_MESH Oleksandr ShyshatskyiandClaude Sonnet 5.5 2026-10-03 17:28:18 +03:00
• b96262aab7 Take the mesh, print-start and shared-stepper pieces of #29 3 people 2026-10-03 11:48:20 +03:00
• bb84772a75 Take the mesh, print-start and shared-stepper pieces of #29 3 people 2026-10-03 11:48:20 +03:00
• 3d9f19391e Clear active bed mesh before parking with Z unhomed (#32) 3 people 2026-10-03 09:27:45 +01:00
• b9a5f873a6 Make the park status and mesh tests agree Oleksandr ShyshatskyiandClaude Sonnet 5.5 2026-10-03 11:16:13 +03:00
• 3860c24252 klipper: clear active mesh before parking with Z unhomed Steven Owen 2026-09-29 21:58:14 +01:00
• 01892ff6f1 Fix toolchanger status while parking (#31) steven-o-cymru 2026-10-03 09:14:16 +01:00
• 6485d8d863 Fix toolchanger status while parking Steven Owen 2026-09-27 23:55:44 +01:00
• 6b3f01a0d0 AFC: wait for the new head's temperature before the restore Oleksandr ShyshatskyiandClaude Sonnet 5.5 2026-10-03 11:11:05 +03:00
• b0c7f8eebd Improve tool calibration safety and speed Oleksandr Shyshatskyi 2026-09-28 12:09:44 +03:00
• 5d672ec6fe Preserve firmware calibration import marker Oleksandr Shyshatskyi 2026-09-27 19:41:13 +03:00
• f3561b1770 Update AFC for multiple tool mappings Oleksandr Shyshatskyi 2026-09-27 19:03:25 +03:00
• 548041197e AFC: reset tool mapping after each print Oleksandr Shyshatskyi 2026-09-27 11:27:40 +03:00
• 5b760343b7 AFC: move back to the print at travel speed after a toolchange Oleksandr ShyshatskyiandClaude Opus 5.5 2026-09-27 10:46:20 +03:00
• fca18d5958 Run AFC's Moonraker writes off klippy's main thread Oleksandr ShyshatskyiandClaude Opus 5.5 2026-09-26 18:22:44 +03:00
• 1e3c355162 Migrate filament handling to AFC over the toolchanger Oleksandr ShyshatskyiandClaude Opus 5.5 2026-09-26 13:58:18 +03:00
• 96c056593e Add release notes for v20260827f-melitopol v20260827f-melitopol Oleksandr Shyshatskyi 2026-09-24 19:26:20 +03:00
• 80a4d64ffd Prepare next firmware release Oleksandr Shyshatskyi 2026-09-24 11:37:28 +03:00
• 56836ca9e9 klipper: pin per-tool exclude object fix Oleksandr Shyshatskyi 2026-09-23 16:44:11 +03:00
• 79c0b63277 Add release notes for v20260827e-melitopol v20260827e-melitopol Oleksandr Shyshatskyi 2026-09-11 22:14:16 +03:00
• 4f6bd1ee1c Pin HelixScreen v0.99.118 for Creator 5 Monstrofil 2026-09-11 14:25:23 +03:00
• 65a1d9dc28 Do not home XY twice when tool is mounted Monstrofil 2026-09-09 19:16:07 +03:00
• bbc57db25c Ship Klipper examples and docs for Moonraker (#24) Monstrofil 2026-09-09 13:51:06 +03:00
• 5718603f1c Document how a spool's material reaches OrcaSlicer (#25) MonstrofilandClaude Opus 5 2026-09-09 13:15:19 +03:00
• 99cc086e8d versions.md: the HelixScreen pin, and a Klipper commit (#23) MonstrofilandClaude Opus 5 2026-09-09 13:15:16 +03:00
• f095075985 Put FlashForge's chelper back where our Klipper replaced it (#22) MonstrofilandClaude Opus 5 2026-09-08 21:07:25 +03:00
• 5f237eff62 Version the pinned recipes on the release, not on memory (#21) MonstrofilandClaude Opus 5 2026-09-08 20:56:59 +03:00
• 5316694795 Put FlashForge's klipperDaemon back on a printer that lost it (#20) MonstrofilandClaude Opus 5 2026-09-08 12:53:54 +03:00
• 1afd5dd2d2 Leave FlashForge's klipperDaemon alone (#19) MonstrofilandClaude Opus 5 2026-09-08 11:33:55 +03:00
• e20ed98dac Refuse to install on FlashForge firmware older than 1.9.6 (#17) MonstrofilandClaude Opus 5 2026-09-08 10:39:37 +03:00
• 0747bc500b Keep the config in a directory of our own (#16) MonstrofilandClaude Opus 5 2026-09-08 10:05:36 +03:00
• b1a5036ec5 The recovery package ships from this branch, not from master restore-stock-klipper-hooks Oleksandr ShyshatskyiandClaude Opus 5 2026-09-07 20:56:08 +03:00
• ebc3d60c58 Put back the one file a stock flash cannot Oleksandr ShyshatskyiandClaude Opus 5 2026-09-07 20:47:04 +03:00
• 0c9cf62415 Document tool numbers assign-tool Oleksandr ShyshatskyiandClaude Opus 5 2026-09-07 20:27:41 +03:00
• fda2d8791c ASSIGN_TOOL: point a file's number at a tool Oleksandr ShyshatskyiandClaude Opus 5 2026-09-07 20:25:05 +03:00
• 0d73319936 Say which tool you mean, everywhere Oleksandr ShyshatskyiandClaude Opus 5 2026-09-07 20:23:27 +03:00
• 33960257ba Give a tool a number, and the number a tool Oleksandr ShyshatskyiandClaude Opus 5 2026-09-07 20:11:55 +03:00
• cfaa7e4ff9 Document OrcaSlicer Moonraker upload setup Oleksandr Shyshatskyi 2026-09-02 13:54:58 +03:00
• fc137ec59d Prepare beta release documentation Oleksandr Shyshatskyi 2026-09-02 13:41:27 +03:00
• 7c74f025ae Document pressure-advance calibration (#15) MonstrofilandClaude Sonnet 5 2026-09-02 13:03:36 +03:00
• 14625b2ad7 Correct pressure-advance page: there is no factory value worktree-docs-pa-calibration-catchup Oleksandr ShyshatskyiandClaude Sonnet 5 2026-09-01 22:41:39 +03:00
• c2b3319fb0 Point pressure-advance results at the slicer, not printer.cfg Oleksandr ShyshatskyiandClaude Sonnet 5 2026-09-01 22:33:42 +03:00
• 0696276d37 Add a simple pressure-advance calibration page Oleksandr ShyshatskyiandClaude Sonnet 5 2026-09-01 22:32:01 +03:00
• 1a4d217e5c Document automatic pressure-advance calibration Oleksandr ShyshatskyiandClaude Sonnet 5 2026-09-01 21:32:41 +03:00
• c536a4f06e installing.md: show the first-boot screen instead of describing it (#14) MonstrofilandClaude Sonnet 5 2026-09-01 20:58:51 +03:00
• 53a9941660 Add release notes for v20260827d-melitopol v20260827d-melitopol Oleksandr Shyshatskyi 2026-09-01 20:55:46 +03:00
• 9c88036dab Pin HelixScreen to v0.99.115-creator5.5 Oleksandr Shyshatskyi 2026-09-01 20:54:39 +03:00
• 6bf7eef238 A TEMP= heat-up is put back on exit, like every other snapshot Oleksandr ShyshatskyiandClaude Fable 5 2026-09-01 17:24:12 +03:00
• a29fd1913d HelixScreen's filament panel now acts on the tool you picked v20260827c-melitopol Oleksandr ShyshatskyiandClaude Opus 5 2026-09-01 15:29:50 +03:00
• b3710c37c4 Merge pull request #13 from Klipper4FlashForge/worktree-pa-sweep-chute Monstrofil 2026-09-01 15:39:14 +03:00
• 9973019ec8 A printer ships knowing where its updates come from Oleksandr ShyshatskyiandClaude Opus 5 2026-09-01 14:09:34 +03:00
• e5d6e5025a Merge pull request #12 from Klipper4FlashForge/relax-max-residual Monstrofil 2026-08-31 23:26:06 +03:00
• 5d29871172 Merge pull request #11 from Klipper4FlashForge/worktree-autohome-xyz-calib Monstrofil 2026-08-31 23:25:53 +03:00
• 4e041a0897 A failed pre-flight check must not leak the PARK= override Oleksandr ShyshatskyiandClaude Fable 5 2026-08-31 23:25:28 +03:00
• 8cd284d3ee A driver latch found already on is debris, not state to preserve Oleksandr Shyshatskyi 2026-08-31 21:22:12 +03:00
• 2b92a76f2f The PA sweep never moves the carriage, so park it over the chute first Oleksandr Shyshatskyi 2026-08-31 21:14:44 +03:00
• 7b4ce414b5 max_residual guards against a mis-trigger, not against probe scatter Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 20:55:10 +03:00
• 01e53aa3f6 Drop the PARK= opt-out from TOOL_LOCATE_SENSOR Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 20:49:34 +03:00
• af16ea0cb5 Drop the HOME= opt-out from the offset commands Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 20:47:15 +03:00
• 2923c2d921 XYZ calibration homes itself instead of refusing Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 20:31:55 +03:00
• 954c9e9a90 Merge pull request #10 from Klipper4FlashForge/worktree-apk-poc Monstrofil 2026-08-31 16:11:33 +03:00
• 75db01dec8 A dry run that proves the timelapse pipeline before a spool is spent worktree-timelapse-test-gcode Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 15:58:41 +03:00
• 074ffb9799 Merge PR #9: the chamber heater's fan follows the heater Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 15:46:00 +03:00
• f11b63b6c1 Give apk a version it can parse in CI, and say so when it cannot Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 15:34:02 +03:00
• b55461cd6b Cancelling an object leaves the SD reader with nothing to pace it Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 15:25:51 +03:00
• 734a04db45 Make the apk feed buildable by CI, and signable by a release Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 15:15:29 +03:00
• f8b925e48f Replace opkg with apk, and sign the feed Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 14:32:07 +03:00
• d1ef791745 The chamber heater's fan follows the heater, not the touchscreen Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 13:50:53 +03:00
• da77666593 Merge pull request #8 from Klipper4FlashForge/worktree-s6rc-postinst Monstrofil 2026-08-31 13:09:30 +03:00
• 2be2de2bc5 The compile does not drive s6-rc-update: on a printer it empties the scandir Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 13:04:42 +03:00
• e3d5a62860 The ntp service execs ntpclient, the only name that sets the clock Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 13:04:28 +03:00
• dda4eb4025 s6-rc-update ships, and the compile runs it before current moves Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 12:43:22 +03:00
• 9fcfaa43a4 klipper-config links the configs it ships, rather than hoping anvil-core did Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 12:26:48 +03:00
• 15aa6abdda The boot database is compiled on the printer too, not only by the build Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 12:22:48 +03:00
• a51b09884d klippy is exec'd directly; start-stop-daemon matched moonraker Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 11:25:15 +03:00
• 5ccfc85558 Make the import gate assert the module it exists for, and prove it bites Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 13:33:20 +03:00
• bf12558082 Document VFA where a Klipper-literate reader will look for it Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 01:15:13 +03:00
• 28eb20f3da Package numpy, because klippy does not start without it Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 01:12:55 +03:00
• a10930aa26 Name the thing that actually applies the VFA numbers: GigaDevice's mclib Oleksandr ShyshatskyiandClaude Opus 5 2026-08-30 23:13:38 +03:00
• 6a4067e863 VFA calibration is one import away, and that import stops klippy booting Oleksandr ShyshatskyiandClaude Opus 5 2026-08-30 23:04:23 +03:00
• 2a5e6832aa klippy is exec'd directly; start-stop-daemon matched moonraker Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 11:25:15 +03:00
• bd0df7c28d FF_PA_CALIBRATE runs FlashForge's PA sweep and reports the number Oleksandr ShyshatskyiandClaude Opus 5 2026-08-31 01:00:20 +03:00
• 5b291d0b46 The PA verdict comes off a serial sensor on the eBoard's second UART Oleksandr ShyshatskyiandClaude Opus 5 2026-08-30 23:14:25 +03:00
• 42d876d5eb The auto-PA sweep is host code; only the per-line verdict is in the eBoard Oleksandr ShyshatskyiandClaude Opus 5 2026-08-30 23:03:37 +03:00
• 9ef21c1fb8 wpa_supplicant is a supervised longrun, not a oneshot that forks Oleksandr ShyshatskyiandClaude Opus 5 2026-08-30 22:17:00 +03:00
• d3dd609e84 Merge pull request #5 from Klipper4FlashForge/worktree-reforge-start-img Monstrofil 2026-08-30 16:06:12 +03:00
• 85615447c5 Merge pull request #6 from Klipper4FlashForge/pin-helixscreen-v0.99.115-creator5.3 Monstrofil 2026-08-30 16:04:29 +03:00
• 6bb58a4091 The timelapse pin is main's head, and v0.0.1 is not a newer one Oleksandr ShyshatskyiandClaude Opus 5 2026-08-30 15:56:32 +03:00
• 3dc50ad187 moonraker-timelapse ships as a package Oleksandr ShyshatskyiandClaude Opus 5 2026-08-30 15:47:02 +03:00
• 58cfd00415 FlashForge's ffmpeg cannot render a rotated webcam, so we build our own Oleksandr ShyshatskyiandClaude Opus 5 2026-08-30 15:46:51 +03:00
• 3462bc5f01 Warn against power-off on the start.img splash Oleksandr ShyshatskyiandClaude Sonnet 5 2026-08-30 15:33:23 +03:00
• 1ceaa09b46 Ship our own start.img instead of FlashForge's Oleksandr ShyshatskyiandClaude Sonnet 5 2026-08-30 15:29:53 +03:00