mirror of
https://github.com/Klipper4FlashForge/firmware.git
synced 2026-10-22 05:12:16 -05:00
worktree-timelapse-test-gcode
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Oleksandr ShyshatskyiandClaude Opus 5
|
2e9f2214a0 |
Merge master into the comment trim
Master moved twelve commits while this branch ran: patch.sh became
payload.sh, run-pre.sh and run-append.sh became runFirmwareExe.sh, the
install manifest and anvil.conf are gone, and versions.env was trimmed
harder there than here (53 comment lines against 185).
Resolved so the merge contributes comments and nothing else. Verified
mechanically: every one of the 270 files in the tree now carries
exactly master's code, and no file this branch touched is resurrected.
- master's deletions accepted: bin/patch.sh, bin/verify.sh,
installer/run-{pre,append}.sh, anvil.conf.in
- versions.env: master's, which is the better trim
- 26 files master only renamed through: this branch's trim kept, with
patch.sh -> payload.sh applied
- 14 files master rewrote to describe the new installer: master's
text taken wholesale, to be re-trimmed separately
- stale references to the manifest and run-append.sh corrected in
pkgs/3rdparty/busybox/build.sh and pkgs/moonraker/build.sh
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NMMpQTajN7RDJySrhQ2cTE
|
||
|
Oleksandr ShyshatskyiandClaude Opus 5
|
b98552386b |
No FlashForge component ships; patch.sh is payload.sh
The software component existed to give the mod one exec hook. It is not needed for that any more, so a release now carries our installer and our payload and nothing else: 26MB smaller, 21MB of which was FlashForge's own firmwareExe travelling back to the partition it was already on, along with their klippy tree, their wifi module and their configs. WHAT IT GIVES BACK. /usr/prog/PROGRAM/software is no longer rewritten, so the version directory there stays FlashForge's with their genuine firmwareExe inside it -- and app_startup.sh's five-second watchdog, which copies one out of that directory when nothing by that name is running, has something to copy again. A printer whose payload fails to install now comes up on the stock UI instead of a blank screen. That recovery has been broken since we started deleting their binary out of a component we shipped; docs/how-it-works.md claimed it worked throughout. THE ROOT PASSWORD moves with it, because it used to ride in the component's shadow file. bin/pack.sh bakes ROOT_PW_HASH into the installer, single-quoted -- an unquoted $6$... would have the printer's shell expand $6 as a positional parameter and ship a truncated hash -- and the installer writes it to /usr/prog/etc/shadow. The random-password path asks one question instead of four: FlashForge ship the same root hash on every machine, so a live shadow still carrying it means nobody has set a password and it is ours to set. The .prev-root-hash recording, the shipped-vs-live comparison and the restore-it- afterwards step were all machinery for surviving a file that nothing overwrites any more, and are gone. pack.sh checks the hardcoded constant against the stock package it built from, because getting it wrong is silent and total: every printer would read as "already set" and none would ever get a password. bin/patch.sh is bin/payload.sh. It patched nothing any more -- no splice, no shadow edit, no firmwareExe deletion -- and what is left is the payload: the feed installed by the printer's own opkg, the seeded config, the manifest. Its sections are renumbered 1-5 with no gaps, and the five tombstone comments marking where removed sections used to be are gone with them. test_recipe_layout.py loses six of its nine tests. Each compared the tree against a description of the tree -- no fourth directory kind, each kind still used, 3rdparty carries no files of ours, installer/ holds exactly two named files -- and none could go red for a reason a printer would notice, while all six went red the moment the layout legitimately changed. The two that bite are kept: a payload/ path escaping $MODDIR, and a recipe name at both levels, which makes pkg_dir silently build the wrong package. SW_VER is deleted from config.env.example and both workflows: it stamped a component that is not built. Gates: 112 static tests pass. The generated installer is verified after substitution -- all four lines present, and `sh -n` over the result, because a hash with a stray character in it would otherwise reach a printer as a syntax error whose only symptom is a package that installs nothing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01CH7Yb4wuPhnppHAB25UX7e |
||
|
Oleksandr ShyshatskyiandClaude Opus 5
|
56b5b6c334 |
The printer image is the only replica; make rootfs was a second way nothing took
`make rootfs` unsquashed rootfs.squashfs out of the stock package into
work/rootfs, and a thin container bind-mounted it with PROG_DUMP supplying
/usr/prog from the factory image. Every caller set PRINTER_IMAGE anyway --
both workflows wrote it into test.env BEFORE running `make rootfs`, so CI
unpacked a 93MB package, unsquashed a rootfs and downloaded a 182MB factory
image on every push and read none of it. build-printer-image.sh never used
work/rootfs either: Dockerfile.full does its own extraction from the same
public firmware and needs no stock package at all.
So the fallback went, and PROG_DUMP with it -- it was only ever read when the
replica was built locally, and both implementations already passed it empty
otherwise. Gone: the target, extract-rootfs.py, gates.extract_rootfs and its
two tar helpers, the thin printer/Dockerfile, the `prebuilt` flag threaded
through both Replica implementations, and Replica.start's want_output, whose
only message was that the local build was about to be slow.
PRINTER_IMAGE is pinned to 1.9.7-1.2.9-20260810 rather than :latest. It is
now the entire substrate the brick-safety gates run on and the only input
nothing checksums, so a floating tag would let it change under a green suite
-- the drift the sha256 pins in both workflows exist to prevent.
THREE THINGS THAT COULD NOT HAVE PASSED, found while doing it:
* Neither workflow built the feed. bin/patch.sh has refused to start
without one since
|
||
|
Oleksandr ShyshatskyiandClaude Opus 5
|
9b5b562a22 |
Comments: keep the contract and the trap, drop the narration
A sweep over every commented file in the tree. What is kept is what a reader needs to change the code safely: what a thing is, its signature, the invariants other files depend on, and the traps that fail silently (find's non-zero exit under set -e, s6's baked-in libexecdir, the -lm that decides whether _sqlite3 exists, opkg's compile-time prefix). What goes is the narration around it: incident histories, arguments against alternatives already rejected, restatements of the code below, and paragraphs re-explaining a rule three files already state. One paragraph in pkgs/3rdparty/opkg/build.sh was duplicated outright. Comment lines 7971 -> 6158. Every change is comment-only: no non-comment line differs anywhere in the 86 files, checked mechanically. Commented-out config directives (#fast_feed: 30000 and friends) are documentation of defaults and are kept. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NMMpQTajN7RDJySrhQ2cTE |
||
|
Oleksandr ShyshatskyiandClaude Opus 5
|
c92b3c9e86 |
anvil.conf is gone; a component runs because it is installed
The file held three unrelated things behind one name: gates deciding which services boot, switches for the splash / the startup wait / the first-boot import, and tunables for the camera and the nice values. Every one of them defaulted to on, and what each offered was a half-installed printer -- a state nobody chose on purpose and everything downstream carried a second answer for. firmwareExe no longer expands the ok-all bundle and filters it, it asks for the bundle: BOOT_SET=ok-all. A printer that should not run a component does not have it -- `opkg remove`, or a stock FlashForge package. The settings worth keeping are each stated once now, in the service that uses them: the camera's resolution in its run script, nice 10 there and nice 5 in moonraker's (the values every install was getting from the template, not the 0 the inline fallback said). ff-startup's `up` stops passing --timeout and --klipper-tries at all, because 240 and 6 are already ff-startup.py's own defaults and two statements of a default can disagree. Nothing sources the file, so nothing reads it, so it must not survive an upgrade looking editable. run-append.sh stops preserving it and removes it unconditionally beside init.d and anvil-service.sh -- unconditionally because the pre-manifest sweep removes seven DIRECTORIES and would leave this file sitting at the top of $MODDIR. The two upgrade tests that asserted the edit survived now assert the file does not. seed/ leaves anvil-core entirely, which takes with it the recipe's one exception to "every sibling directory is shipped", the seed mount in the replica plumbing, and its exemption in the .ipk allowlist. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015E7armHFDcnZFZwdAbqkbt |
||
|
Oleksandr ShyshatskyiandClaude Opus 5
|
52ac068f0c |
ffsim: four items the qa migration left with no caller
Nothing here changes what the three surviving launchers do. Each item was
reachable only from a case script or a test that qa/ has since replaced.
Config.stock_for() picked the model's stock baseline for the install
cases. Those are qa/replica/test_install.py now, and
qa/lib/config.py carries the live copy. Nothing under
tools/replica/ or bin/ asks for a baseline, so the
three STOCK_TGZ* keys leave WANTED with it -- the
dump no longer reads a value nobody wants.
Config.config_env stored on every instance and read by nothing. load()
Config.test_env still names the file that failed in its own error;
that is a local, and it stays.
stage_payload()'s anvil.conf, prog/start.sh and run-append.sh were
three explicit copies staged flat for case-moonraker.sh and case-upgrade.sh.
Both are qa/ modules. The one case that still opens
anything under /tmp/payload is case-boot-screen-dump.sh,
and it reads bin/ffscreen.py -- which arrives in the
copytree.
gates.shutil_which() an alias for shutil.which that re-imported a module
already imported at the top of the file. _rmtree had
the same redundant import.
Three comments were describing things that no longer exist: command()'s
docstring offered it as something to diff against the shell launcher's argv
(that launcher and the test that diffed it are gone), _python_tarball and
_python_trees both pointed at _s6_tarball for a rationale, and config.py's
header used `make test-install` as its example of an override.
Verified: pyflakes clean over the package and its three launchers, Config.load
and Replica.command still build a 41-argument argv, and stage_payload still
puts bin/ffscreen.py where case-boot-screen-dump.sh reads it. qa/static is 43
passed either side; its remaining errors are this checkout's missing
vendor/opkg-utils, and test_shell_syntax.py does not collect because the
uncommitted test/ deletion in the working tree leaves PY_GLOBS' "test/*.py"
matching nothing. Both predate this commit and neither is touched by it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016bLGYpVAeVzAX6NeAxcU42
|
||
|
Oleksandr ShyshatskyiandClaude Opus 5
|
c185ef3285 |
The replica is a build tool; test/ is 28 unit tests
Two changes that turned out to be one.
MOVED, NOT DELETED. `test/ffsim/` and `test/integration/printer/` are
`tools/replica/`. They were never tests: bin/patch.sh calls
bin/build-payload.py, which starts a replica and assembles the payload by
running the PRINTER'S OWN opkg against / inside it -- so the "test harness"
was on the build path, and deleting it as asked would have broken `make
build`. qa/lib/replica.py drives the same directory unmodified. No content
changed; what changed is qa/lib/replica.py's build directory, three launcher
sys.path lines, the Makefile targets and the CI shellcheck glob.
tools/replica/README.md says who drives it and why it is not under test/.
CUT TO 28. The five surviving modules were 136 tests; they are 28, chosen on
one question: would this failure be SILENT? What is kept is the mistakes that
run perfectly and are wrong --
test_startup 8 no stamp unless the values are verifiably saved (a
stamp written early is a printer that has lost its
factory calibration for good), and the handover order
test_tool_transform 7 every one is a move to the wrong place: a sign, a
frame left applied while probing, a stale gcode_move
cache, a config a calibrated printer cannot parse
test_ffscreen 5 the four ways it can do harm rather than look wrong
test_chamber 4 the chamber mistakes that cost a print before anyone
sees them, plus the parse gate they rest on
test_gcode 4 a renamed macro, and the safe file being cold
What went: the panel narration, the geometry probe and parse_geometry, the
z_adjust and per-job-Z bookkeeping, the config layout checks, the G-code
bounds checks. Each is either a wrong number shown to a person, or a failure
the printer reports loudly the first time -- and qa/replica/test_boot_screen.py
already renders the real frames on the real machine.
The rewrite is not a delete: assertions were folded so a kept test asks its
question in every direction it can be got wrong (both models, both rotations,
all four ways the migration can fail), and each file's header now says what it
dropped and why, where the next person will open it.
Also gone: conftest's `rootfs` fixture, orphaned two commits ago. Nothing under
test/ needs the firmware, docker, or a network any more.
28 host-side tests pass in 0.15s. qa/static unchanged at 218. `make rootfs`
re-verified end to end from its new path.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UzLebCrvc8ssWR5JuEsha4
|