Commit Graph

Select branches

Hide Pull Requests

afc-migration

assign-tool

master

restore-stock-klipper-hooks

worktree-adopt-installer

worktree-docs-pa-calibration-catchup

worktree-max-residual-default

worktree-timelapse-test-gcode

#1

#10

#11

#12

#13

#14

#15

#16

#17

#18

#18/merge

#19

#2

#20

#21

#22

#23

#24

#25

#26

#26/merge

#27

#27/merge

#29

#3

#31

#32

#35

#35/merge

#4

#40

#40/merge

#5

#6

#7

#8

#9

v20260825-nova-kakhovka

v20260825b-nova-kakhovka

v20260827-melitopol

v20260827b-melitopol

v20260827c-melitopol

v20260827d-melitopol

v20260827e-melitopol

v20260827f-melitopol

Mono Color

• 401c2ecf35 The ff-*.cfg are ours: overwrite them, and say so at the top Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 15:54:11 +03:00
• 9b1f944293 Ship the ff-*.cfg includes in printer.base.cfg Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 15:39:15 +03:00
• f10d002cf6 Set the chamber light on in printer.base.cfg too Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 15:44:19 +03:00
• a70462b323 Light the chamber at startup; firmwareExe is not there to do it Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 15:36:46 +03:00
• 424ef059a7 Stop telling the operator to persist prepare=0 Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 15:27:54 +03:00
• f70369155b Run the brick-safety gates in CI, and stop skipping quietly Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 15:17:15 +03:00
• 79ca564d36 ff-toolchange.cfg: drop the comment block that outlived its code Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:22:14 +03:00
• 30b21262ed Ship the two verification files, not the thing that wrote one Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 15:02:16 +03:00
• 959fbd356a Generate the print that proves the macros, not just the machine Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 14:57:23 +03:00
• cd36ff584c Restore the exec bit on 31 scripts, so CI can run any of them Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 14:53:13 +03:00
• e0dad3513c Rewrite the host half of the harness in Python, so a broken gate fails Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 14:28:47 +03:00
• 5bf57cb75a ff_toolchange: RESTORE_AXIS, and three more upstream commands Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 14:08:15 +03:00
• 9008a9a00f Cut test_script_roots down to the one check that earns it Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 14:09:12 +03:00
• 71044d5867 Drop runout_distance and its watcher Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 14:01:55 +03:00
• 1d8f3091dd Say what happened instead of quoting the app's error codes Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:55:51 +03:00
• 14b8b1fe8f Drop the two macro bodies nothing calls Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:42:00 +03:00
• 15ef06dcef Ship [ff_print], fold _FF_PRINT_END into END_PRINT, drop the origin flag Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:35:55 +03:00
• 9d33c8c591 Fix the two docker build contexts the move left behind Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:59:03 +03:00
• 43baf4054e Drop the unit lane; one suite, in test/integration Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:37:58 +03:00
• 2ae9736e97 Name the two lanes unit and integration, and fix what the move broke Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:23:18 +03:00
• 8337359a68 Split test/ into the two lanes it already had Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:13:04 +03:00
• 801c772c21 ff_toolchange: align the compat views with klipper-toolchanger Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:07:45 +03:00
• a7e0b3fd3e Bring the MCU handshake in line with the decompiled stock routine Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:01:35 +03:00
• 91604c2dfb Cut the suite to four gates, and rewrite the Python half as pytest Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 13:00:12 +03:00
• 3a28fdf65b Drop test-chelper and its build gate Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 12:38:31 +03:00
• 71cea577c5 Drop test-printer-db and test-env Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 12:33:50 +03:00
• 7f30fc1132 Drop the dead weight in test/ Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 12:24:37 +03:00
• 3a968d4219 Land the ffcfg refactor that was sitting in the working tree Oleksandr ShyshatskyiandClaude Opus 5 2026-08-24 12:24:18 +03:00
• 2ad7304397 Drop assets/orca and the last four fork-only calls Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 23:07:21 +03:00
• 35aa61fccb Keep the Orca profile stock; prepare from the file by default Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 23:03:18 +03:00
• 764af2aacd Drop SDCARD_SET_CHANNEL: upstream needs no channel Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 23:01:40 +03:00
• 848db028d0 Drop the four SDCARD_* calls: nothing left to clear Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 22:59:09 +03:00
• 86be9462b4 Merge the published master: same tree, unrelated history Oleksandr Shyshatskyi 2026-08-23 22:53:44 +03:00
• 8208fef216 ff_print: restore the SDCARD_* FIXME lost in the move Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 22:43:43 +03:00
• 1840a80a2f ff_print: record what the Creator 5 stock block actually contains Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 22:38:09 +03:00
• 382fa5f2cb ff_print: optional automatic prepare, off by default Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 22:32:33 +03:00
• 4705992627 Actually run test-printer-db Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 22:23:04 +03:00
• 3b7da4489b Rename the printer-database drop-in: it covers both Creator 5 models Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 22:20:14 +03:00
• 38be3baec7 HelixScreen: tell the two Creator 5 models apart by the chamber heater Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 22:16:09 +03:00
• 12bbd1e7dc Retire the probe profile: there is one package now Oleksandr Shyshatskyi 2026-08-23 22:15:07 +03:00
• 3369a5ee1b Creator 5: ship a chamber config with no heater, not a disabled one Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 22:08:27 +03:00
• 607e6595fb Start the camera ourselves: mjpg-streamer was on the disk all along Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 22:06:25 +03:00
• 5bdf78109a Retire firmwareExe: own the web stack, and say what goes with it Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 21:50:32 +03:00
• 493ef79e45 Prove ff-mcu-bringup.py actually runs on the printer Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 21:07:35 +03:00
• 8df9baf179 Do the MCU handshake in Python, from start.sh; ff-*.cfg are mandatory Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 20:52:21 +03:00
• d43b1beaa3 Do the MCU handshake ourselves instead of patching FlashForge's binary Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 20:40:12 +03:00
• 424412e348 Hand the heat and level boards their bootloader handshake Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 20:13:45 +03:00
• 801cd4e897 Drop the implicit start-G-code layer; keep START_PRINT and END_PRINT Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 18:44:32 +03:00
• 9b20ca0f84 Retry Klipper startup until every MCU answers Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 18:34:31 +03:00
• 827730761f Run FlashForge's stock slicer start G-code unmodified Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 18:25:08 +03:00
• ce85153838 Refuse to ship a c_helper.so that does not match klippy Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 17:45:04 +03:00
• cc0b340dbd S50wifi: hand the waiting off to the background Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 17:20:04 +03:00
• 44d45f2c46 Repoint the toolchange docs at their new paths Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 17:20:04 +03:00
• a9299397f4 Build the toolchanger from this repo instead of a TOOLCHANGE= path Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 16:50:44 +03:00
• 0ef9d6b86b Move the imported toolchange files into this repo's layout Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 16:48:25 +03:00
• e514f885e1 Import creator5-toolchange with its history Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 16:48:00 +03:00
• 8a038acb27 Run the printer's own boot script for the update test, and cut the suite to 5m Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 16:36:45 +03:00
• 22d16f984e Run the printer's own boot script for the update test, and cut the suite to 5m Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 16:36:45 +03:00
• 628a580c23 Split the repo into ship / build / test lanes, and add the printer replica Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 14:30:09 +03:00
• a5300bde12 Split the repo into ship / build / test lanes, and add the printer replica Oleksandr ShyshatskyiandClaude Opus 5 2026-08-23 14:30:09 +03:00
• a30884db11 ff_legacy: import the stock firmware's calibration automatically Alexander 2026-08-22 22:31:31 +03:00
• 2178968a2a Build a separate package per model; add the model-gate test Oleksandr Shyshatskyi 2026-08-22 22:27:55 +03:00
• 855bb52573 Build a separate package per model; add the model-gate test Oleksandr Shyshatskyi 2026-08-22 22:27:55 +03:00
• 8da5c911ca Recovery is the stock package; add the model gate check Oleksandr Shyshatskyi 2026-08-22 22:11:53 +03:00
• 3a70b678f4 Recovery is the stock package; add the model gate check Oleksandr Shyshatskyi 2026-08-22 22:11:53 +03:00
• 2d92c681ec Run everything in Docker; test against the printer's real busybox Oleksandr Shyshatskyi 2026-08-22 22:02:11 +03:00
• ff7204f7d5 Run everything in Docker; test against the printer's real busybox Oleksandr Shyshatskyi 2026-08-22 22:02:11 +03:00
• f935948d77 Initial commit: USB-installable custom firmware builder for Creator 5 Oleksandr Shyshatskyi 2026-08-22 21:48:56 +03:00
• 4415905fb3 Initial commit: USB-installable custom firmware builder for Creator 5 Oleksandr Shyshatskyi 2026-08-22 21:48:56 +03:00
• ade7979623 CALIBRATE_TOOL_OFFSETS: klipper-toolchanger's calibration entry point Monstrofil 2026-08-22 21:30:21 +03:00
• 7d30d8d8bc Calibration: verify the plate is off with the empty carriage first AlexanderandClaude Fable 5 2026-08-22 17:01:31 +03:00
• 5d27532b0d tool T<n>: report detect_state for klipper-toolchanger UIs AlexanderandClaude Fable 5 2026-08-22 16:35:31 +03:00
• 241bc8dd4a G28 wrapper: rename to G28.1 (Klipper requires the same command type) AlexanderandClaude Fable 5 2026-08-22 16:25:40 +03:00
• d96952a2d4 G28 docks a mounted tool before homing Z; resonance tests grab a head AlexanderandClaude Fable 5 2026-08-22 16:18:52 +03:00
• 12df5bc9f2 Runout: optionally print through the PTFE buffer before pausing AlexanderandClaude Fable 5 2026-08-22 16:04:03 +03:00
• adbb2620ae PURGE: add the app's cold wipe; express the wipe height in the raw frame AlexanderandClaude Fable 5 2026-08-22 15:13:21 +03:00
• 42a83d34ea Re-derive offsets at connect: station_z is not loaded yet in __init__ AlexanderandClaude Fable 5 2026-08-22 14:35:27 +03:00
• 43ff1b7362 Apply the absolute bed-frame Z at every grab; autosave dock positions AlexanderandClaude Fable 5 2026-08-22 14:12:38 +03:00
• 2d8017ca5c Port runout/clog pause and pre-print nozzle clean + tool-presence gate AlexanderandClaude Fable 5 2026-08-22 09:25:12 +03:00
• f8836392d5 Port filament load/unload/purge from the touchscreen app AlexanderandClaude Fable 5 2026-08-21 22:53:55 +03:00
• 1c1a06d1d8 Expose klipper-toolchanger-shaped status for HelixScreen AlexanderandClaude Fable 5 2026-08-21 13:07:31 +03:00
• 23d600f954 Notes: app-vs-Klipper ownership map; fix station-sensor provenance AlexanderandClaude Fable 5 2026-08-21 12:58:20 +03:00
• 065afec2cf Store calibration in Klipper config; add nozzle-offset calibration AlexanderandClaude Fable 5 2026-08-21 12:54:10 +03:00
• 8549b86118 Link community Discord for jailbreak instructions Alexander 2026-08-20 20:03:35 +03:00
• 2bc36a899d Roadmap: block touchscreen UI during Mainsail prints Alexander 2026-08-20 19:58:28 +03:00
• 7d7f1aef3c Add condensed reverse-engineering notes Alexander 2026-08-20 19:56:12 +03:00
• c8f59f75e3 Move support badge to the top Alexander 2026-08-20 19:50:49 +03:00
• d485f25d49 Add Buy Me a Coffee link Alexander 2026-08-20 19:49:56 +03:00
• c2f47707f9 First version Alexander 2026-08-20 19:43:24 +03:00