Oleksandr ShyshatskyiandClaude Opus 5
42d876d5eb
firmwareExe runs a real PA calibration at print start, inside the nozzle clean. CommMgr::paTestMgr @0x791640 prints one slow-fast-slow line per candidate at Y = 50 + 5*i for seven fixed PA values, asks the eBoard to score each line, keeps the smallest that scores 9, repeats until three sweeps have produced a winner and averages those three. All of that is host code and is recovered here in full. Only the verdict crosses into the closed toolhead MCU, over two commands that pa_adjust.py already forwards -- and pa_adjust.py is in our tree byte-identical to FlashForge's, with [pa_adjust] already in printer.base.cfg. So PA_ACTION and PA_GET should answer on a Reforge machine today; that is step one of the port. This supersedes "sensor unknown" in 60-background.md and "callable, not reproducible" in 25-app-vs-klipper-ownership.md. What stays unknown is narrower: which sensor the eBoard samples, what ACTION=11 and PC=666 select, and what the non-9 verdicts mean. Two findings that shape the port. PA_GET only respond_info()s its value, so the sweep cannot be a G-code macro -- it needs an extra that queries the eBoard directly. And PA_ACTION is an immediate MCU command, so FlashForge never synchronises the measurement window with motion; the port must copy that timing rather than improve it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Kw2rehvQJ7LSc28hPikfqk
Reforge
Custom firmware for the FlashForge Creator 5 and Creator 5 Pro.
It installs the way a normal FlashForge update does: copy one file to a USB stick, plug it in, power the printer on. No jailbreak, no soldering, no opening the case, no ssh needed to get started — the printer's own updater does the work.
Packages are published on the Releases page — two files per release, one per model, marked pre-release while the mod is young. Help and support: the Discord.
Unofficial and unaffiliated with FlashForge. It voids your warranty and you are responsible for your machine. See Status for what has actually been tried on hardware before you flash anything.
Status
It runs on a real printer — a Creator 5 Pro, flashed and printing:
A checked box happened on that machine; an empty one has not, yet.
For everyone:
- Install and migration from stock firmware — the printer's own updater does it; your unit's factory calibration imports itself on the first boot
- Printing — gcode straight from the slicer, nothing edited
- Toolchanges — a current Klipper with real toolchanger support, in place of the 0.12-era tree FlashForge ships
- Nozzle-offset calibration
- Mainsail at
http://<printer-ip>/, with a current Moonraker behind it — anything that speaks the Klipper API works - Camera — mjpg-streamer, already on the printer; the mod just starts it
- Wifi
- HelixScreen on the printer's own screen
- Chamber heater
- Creator 5 (non-Pro) — its package builds and passes the same replica test suite, but has not touched hardware
- Going back to stock — proven on the printer replica, not yet needed on the machine. The stock package restores everything it carries; Moonraker is not in it, so the mod's build stays and keeps working — see Support
For the tinkerer:
- ssh as root — a random password is chosen on the first install
and written to
anvil-password.txton your stick; updates keep it (make passwdbakes in your own)
What you give up
FlashForge's application is one binary, and replacing it takes everything
that lived inside it: the network API on :8898, and with it FlashPrint,
Orca's FlashForge profile and the mobile app. Moonraker's API takes over.
Flashing the stock package brings them back.
If your prints already come out the way you want and you like the printer's own screen, this mod is not for you. It trades FlashForge's polish for Klipper's reach, and it expects you to be comfortable with a Klipper config and an ssh session when something breaks — Is this for you is the honest version of that question.
Get it
Creator 5 and Creator 5 Pro are not interchangeable. The printer refuses a package built for the other model — the most common reason a flash "does nothing". Yours is in Settings → About.
| Your printer | The file on the Releases page |
|---|---|
| Creator 5 | Creator5-anvil-<date>.tgz |
| Creator 5 Pro | Creator5Pro-anvil-<date>.tgz |
Download the stock FlashForge package for your model before you begin. It is the undo button: flashing it back puts the printer as it was.
Start here
| Is this for you | Who should flash this, who should stay on stock, and what it asks of you |
| Installing | The flash, the first boot, your root password |
| Your first print | The go/no-go checks, calibration, and the two verification files |
| Support | The logs, and the way back to stock |
The full manual is at
reforge.readthedocs.io. If you want the
insides — one file, firmwareExe, with the stock boot scripts, updater and
recovery path left untouched — How it works is under
For contributors.
Credits
Built on the work of others: ghzserg/FF publishes the stock packages and factory image everything here starts from; Mainsail, Moonraker and HelixScreen are shipped as released; the toolchanger status API follows viesturz/klipper-toolchanger so tool-aware UIs work unchanged.