mirror of
https://github.com/Klipper4FlashForge/firmware.git
synced 2026-10-21 21:02:16 -05:00
Oleksandr ShyshatskyiandClaude Opus 5
a6098c7f64
Fourteen sections, install through troubleshooting, in the one file that existed when there was nowhere else to put them. The site gave the manual a home; this moves it there and orders it by what the reader is doing rather than by which subsystem owns the answer. Someone whose printer will not boot should not have to know that the symptom table lives in a file called hardware-testing.md. Three topics were documented two and three times over, and each copy was free to drift: install in README and toolchange.md, calibration in README, calibration.md and toolchange.md, slicer setup in README and toolchange.md, "before you start" in all three. Each is now in one place. The owner path is Is this for you -> Installing -> After the flash -> Your first print -> Nozzle-offset calibration -> Printing -> Upgrading -> When something goes wrong, with error codes, versions and how-it-works behind a Reference group. The README keeps what a front door keeps: what this is, the status checkboxes, what you give up, which file to download, and where to go next. toolchange.md was four documents in one 38 KB file. The owner half -- slicer setup, filament, runout, the offset check before a first print -- is in Printing and Your first print; the design notes, input shaper, roadmap, HelixScreen and reverse-engineering notes stay, and the page moves to Internals. hardware-testing.md was split down the middle by audience the same way: the go/no-go checks and the symptom table were the owner's, and only keeping the two verification files honest as the macros change is ours. Two things this fixes rather than moves. The error-code table was notes/70-error-codes.md, an internals note the README sent owners to; it is docs/error-codes.md now, a page. And toolchange.md still opened "Not yet run on hardware" while the README's checkboxes described a Creator 5 Pro that has been printing for weeks -- the two pages have disagreed since the first hardware run. Contributors are deferred, as agreed: those pages are regrouped, not rewritten. The nav says so. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01S3XZh4SqPdXAowVndz6tMr
