matthewtrahan d3d606f9b8 ring fade: review fix -- fade the rings only; the axis guide line's opacity is never reset by the gizmo, so scaling it compounded every frame and left the line gone for the session

2026-10-18 15:36:14 -05:00

..

braceghost.js

sway (Auto braces): the rotate rings fade back (to 15%) while a brace preview is up and fade in again when it goes -- they sat over the ghost and the side being aimed at; faint, a drag still turns the part. ui/ringfade.js scales the gizmo's per-frame opacity

2026-10-18 15:36:14 -05:00

calibrate.js

feat(i18n): add Simplified Chinese web UI translations

2026-10-17 13:50:21 -05:00

dom.js

ui: move the three.js stage out of app.js into ui/scene.js (#22)

2026-09-24 22:04:40 -05:00

export.js

ui: plates, all on screen -- the plates sit side by side in one row (ui/plateview.js), each with its bed and a Plate N label, the ones not being edited showing their part and fins dimmed; a click on a plate in the view or on its tab edits it and the camera glides there; See all pulls back over the row. Deleting a plate or removing a model shows Undo for 10 s before anything is freed; Export all writes one .zip of 3MFs; each plate keeps its section cut and Suggest list

2026-10-18 13:28:24 -05:00

finbuild.js

sway: review fixes -- the Tine contact offset field is gone (a positive offset lifts the tines off the part, zero meets it flush; the engine keeps its -0.01 default, the same output as main), Brace walls above starts at 5 cm, tests pin a full-height hand brace, the low-click reason and the cross ribs at the page's settings (two per brace over the start height, closed, clear of the part, no brace or tine lost), and the new and changed strings in de, nl, pt, ar and zh

2026-10-18 15:36:14 -05:00

finkeys.js

remove fins: key review fixes -- an exact key wins (a #n twin's removal hid its first copy), older and unparseable keys match exactly only, and the net is across 0.4 / along 2.5 mm of the wall plus height within 0.35: a removed fin gone from the rebuild no longer hides the neighbour beside it (Full coverage fill walls sit 0.5 mm apart), at the cost of a few removals coming back (m4 X30 77/84)

2026-10-16 16:50:16 -05:00

history.js

sway: review fixes -- the Tine contact offset field is gone (a positive offset lifts the tines off the part, zero meets it flush; the engine keeps its -0.01 default, the same output as main), Brace walls above starts at 5 cm, tests pin a full-height hand brace, the low-click reason and the cross ribs at the page's settings (two per brace over the start height, closed, clear of the part, no brace or tine lost), and the new and changed strings in de, nl, pt, ar and zh

2026-10-18 15:36:14 -05:00

i18n.js

feat(i18n): add Simplified Chinese web UI translations

2026-10-17 13:50:21 -05:00

io.js

ui: plates review fixes -- the viewer's and printer's settings (nozzle, layer view, rings, mouse preset) stay put across a switch instead of following the plate; Export all locks the tabs while it switches; an import comes back to the plate it was started on (or lands nowhere if that plate was deleted); a multi-file import whose last file fails drops its empty plate; and a plate keeps its stash until its restore succeeds

2026-10-18 13:28:24 -05:00

islands.js

islands: review fixes -- the readout's '(+N midair starts)' no longer stacks on every rebuild, removal or Show midair starts toggle (only the line's rewrites append it; builds redraw the card); the red's bare area is read before the island walls, so Full's rows-or-patch pick stays main's; the card says when the island pass ran out of walls, and in Full on a point-seated part with the pad off that none got one

2026-10-18 09:05:08 -05:00

more.js

ui: More settings review fixes -- the changed count stays on the line while the section is open, the sway switch drops its 'tall parts' hint under the Tall parts heading, and the wall-lines exception is described as the guard it is

2026-10-15 22:09:44 -05:00

navigation.js

toolbar: the left pane's pose and view tools move into the bottom view toolbar -- Undo/Redo, then Rotate (90° steps, Reset, Lay a face flat, rotate rings), Suggest, Strength (lit while a load is set), Section and View (Mouse preset, Show layers); each popover opens above its own badge and extends right; the left pane keeps only the stats card (local issue 42)

2026-10-15 15:51:17 -05:00

navpresets.js

nav: a remembered preset key must be the table's own -- 'toString' from corrupted storage came back as a function and unbound every mouse button (review). tests: navpresets -- a prototype key falls back to Default

2026-10-08 17:15:13 -05:00

part.js

ui: plates, all on screen -- the plates sit side by side in one row (ui/plateview.js), each with its bed and a Plate N label, the ones not being edited showing their part and fins dimmed; a click on a plate in the view or on its tab edits it and the camera glides there; See all pulls back over the row. Deleting a plate or removing a model shows Undo for 10 s before anything is freed; Export all writes one .zip of 3MFs; each plate keeps its section cut and Suggest list

2026-10-18 13:28:24 -05:00

pick.js

picks: reflow pick.js's header comment

2026-10-14 21:05:50 -05:00

plates.js

ui: plates review fixes -- a click on the edited plate's part, fins, walls or cut handle is for that plate, not a switch to a bed behind it; a plate left before its fins build keeps the fins it was parked with (same pose only; a new part drops them); deleting an empty plate keeps the last Undo

2026-10-18 13:28:24 -05:00

plateview.js

ui: plates review fixes -- a click on the edited plate's part, fins, walls or cut handle is for that plate, not a switch to a bed behind it; a plate left before its fins build keeps the fins it was parked with (same pose only; a new part drops them); deleting an empty plate keeps the last Undo

2026-10-18 13:28:24 -05:00

plugins.js

feat(i18n): add Simplified Chinese web UI translations

2026-10-17 13:50:21 -05:00

pose.js

sway (Auto braces): the rotate rings fade back (to 15%) while a brace preview is up and fade in again when it goes -- they sat over the ghost and the side being aimed at; faint, a drag still turns the part. ui/ringfade.js scales the gizmo's per-frame opacity

2026-10-18 15:36:14 -05:00

readout.js

feat(sway): cap drawn braces at click height and add brace calibration

2026-10-18 15:36:14 -05:00

remove.js

feat(i18n): add Simplified Chinese web UI translations

2026-10-17 13:50:21 -05:00

ringfade.js

ring fade: review fix -- fade the rings only; the axis guide line's opacity is never reset by the gizmo, so scaling it compounded every frame and left the line gone for the session

2026-10-18 15:36:14 -05:00

scale.js

ui: plates -- tabs under the top bar hold one model each, with its own pose, settings, drawn walls, removed fins and undo; + adds a plate, x deletes one, several files imported at once go one to a plate, and Export gets All plates (3MF). A switch stashes the live part and its state and restores the other plate's as undo does, so nothing is re-read or re-welded

2026-10-18 13:28:24 -05:00

scene.js

render: draw while something may be changing (input, orbit easing, a mesh added or removed, a build landing) and every 500 ms otherwise -- idle went from 60 frames a second to 2

2026-10-14 21:14:50 -05:00

search.js

sway: review fixes -- the Tine contact offset field is gone (a positive offset lifts the tines off the part, zero meets it flush; the engine keeps its -0.01 default, the same output as main), Brace walls above starts at 5 cm, tests pin a full-height hand brace, the low-click reason and the cross ribs at the page's settings (two per brace over the start height, closed, clear of the part, no brace or tine lost), and the new and changed strings in de, nl, pt, ar and zh

2026-10-18 15:36:14 -05:00

section.js

ui: plates review fixes -- a click on the edited plate's part, fins, walls or cut handle is for that plate, not a switch to a bed behind it; a plate left before its fins build keeps the fins it was parked with (same pose only; a new part drops them); deleting an empty plate keeps the last Undo

2026-10-18 13:28:24 -05:00

session.js

sway preview: review fixes -- removing or restoring an Auto fin refreshes the hover memo (a removed brace no longer refuses the spot), a rebuild or a move off the upright side drops the ghost and its queued frame, the stored spot stays on the face's plane (a reopened session finds the same face), the memo keeps 200 spots, a capped top on a band edge keeps its band count through the save round-trip, cross ribs shear the part once per lean instead of per arm and retry, and a session without settings leaves the new fields as they are

2026-10-18 15:36:14 -05:00

settings.js

sway: review fixes -- the Tine contact offset field is gone (a positive offset lifts the tines off the part, zero meets it flush; the engine keeps its -0.01 default, the same output as main), Brace walls above starts at 5 cm, tests pin a full-height hand brace, the low-click reason and the cross ribs at the page's settings (two per brace over the start height, closed, clear of the part, no brace or tine lost), and the new and changed strings in de, nl, pt, ar and zh

2026-10-18 15:36:14 -05:00

strength.js

ui: Remove model -- a button in the stats card takes the part off the plate and brings back the start page, so the next model needs no reload; the drawn walls, removed fins, load arrow, Suggest list, section cut, scale, import note and undo go with it, the fin settings stay

2026-10-18 09:23:30 -05:00

suggest.js

ui: plates, all on screen -- the plates sit side by side in one row (ui/plateview.js), each with its bed and a Plate N label, the ones not being edited showing their part and fins dimmed; a click on a plate in the view or on its tab edits it and the camera glides there; See all pulls back over the row. Deleting a plate or removing a model shows Undo for 10 s before anything is freed; Export all writes one .zip of 3MFs; each plate keeps its section cut and Suggest list

2026-10-18 13:28:24 -05:00

toolbar.js

ui: Remove model -- a button in the stats card takes the part off the plate and brings back the start page, so the next model needs no reload; the drawn walls, removed fins, load arrow, Suggest list, section cut, scale, import note and undo go with it, the fin settings stay

2026-10-18 09:23:30 -05:00

topbar.js

site: the top bar fits any window -- under 1320 px GitHub and Ko-fi go to icons, under 1140 the brand text, Build volume label and some slider width go; below ~1000 it wraps onto more rows (right-aligned) instead of pushing buttons off the edge, and ui/topbar.js keeps --topbar-h so the rails, narrow dropped panels and the welcome card start under it

2026-10-07 10:47:29 -05:00

volume.js

ui: plates, all on screen -- the plates sit side by side in one row (ui/plateview.js), each with its bed and a Plate N label, the ones not being edited showing their part and fins dimmed; a click on a plate in the view or on its tab edits it and the camera glides there; See all pulls back over the row. Deleting a plate or removing a model shows Undo for 10 s before anything is freed; Export all writes one .zip of 3MFs; each plate keeps its section cut and Suggest list

2026-10-18 13:28:24 -05:00

walls.js

sway (Auto braces): a click over the rotate rings stands the brace -- the ghost shows there too, a click stands it and a drag still turns the part; a press that snapped a ring (5 deg comes within the 4 px a click allows) is a turn and stands nothing; and off an upright side the dot and crosshair go even with no brace shown (moving onto the top after placing one left them, and a build landing mid-hover left the crosshair)

2026-10-18 15:36:14 -05:00