getifaddrs listed only the host's IPv4 and IPv6 addresses, so the
per-interface AF_LINK entries FreeBSD's getifaddrs puts first were
missing, and with them the interface index, hardware address, MTU and
counters and every interface without an address.
On Linux each interface now starts with an AF_LINK entry, followed by
its addresses, as FreeBSD 11.4's getifaddrs orders them. Its address is
a sockaddr_dl with the host index, type, name and hardware address
(none for a loopback), sized as FreeBSD's if_attach sizes it. Its
ifa_data is a 152-byte FreeBSD if_data filled as if_data_copy fills it:
type, address and header length, link state, MTU, speed and the host's
packet, byte, error, drop and multicast counters from sysfs, or the
host list's 32-bit counters when sysfs cannot be read. Fields with no
host equivalent are 0 and listed in the debt entry. Windows is
unchanged.
PS4 firmware 10.71 converts "1.2.3.4" followed by a space, tab, LF,
VT, FF or CR, and anything after it ("1.2.3.4 x"), to 1.2.3.4 and
returns 1, where host inet_pton returns 0. Leading whitespace, other
trailing bytes (0x01, 0xa0), "1.2.3 " and IPv6 text with whitespace
still fail there.
A failed conversion leaves the destination and sceNetErrnoLoc
unchanged on the console; Winsock inet_pton writes the parsed prefix
before failing, so the conversion now goes through a local buffer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
v_mad_f32, v_mac_f32, v_madak_f32 and v_madmk_f32 exist only on gfx10.1,
so the RDNA2 oracle can't measure them. Measured on gfx1010 (RX 5700 XT)
in wave32 at IEEE 0 and 1, f32 denormal modes 0 to 3 and round modes 0
to 3, and in wave64, they round the product before the add, flush f32
sources, product (tiny after rounding with an unbounded exponent) and
result in every mode, and choose NaN results like the fma forms.
The behaviour stays left to the driver: translating it on every lane
cost about 15x main on the RX 5700 XT and 23x on an RTX 3070, and a
branch around the exact path still about 6x, so the lowering waits for
the SPIR-V float controls of #981.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The name hashes to zBsgF0q8DIM. Signature and error order follow the
OS 10.01 system module: NOT_INITIALIZED, INVALID_ARG for a NULL output,
INVALID_HANDLE for a bad handle. The emulated pad is not an Access
controller and reports 0.
The OS 10.01 system module checks only that the library is initialised,
then sends a per-process value to ShellCore over Mbus and returns 0 when
that call succeeds. It does not look at pad handles, so the throw while a
pad is open is gone. 0x809200ff, measured in a process that is not a game,
is the failed Mbus call; a game process is assumed to get 0.
The guest's second-kind Bessel functions return -inf and raise the divide-by-zero exception for x = +-0 (see e_jn.c), but the UCRT returns NaN for y1 and yn. Route x == +-0 through a shared helper, cover ynf(2, 0) in the guest math test, and note the special case in the libc technical debt.
A title can relocate a registered shader header, and the register, special and
semantic arrays it points at, into memory of its own and resolve the ABI with
that copy (Astro's Playroom, PPSA01325, #2914). SameHeader accepted such a copy
only while every pointer inside it stayed put, so a moved array left the
resolution throwing "refers to a replaced shader header".
Accept the copy when every array it names still holds the registered bytes: the
registered header then decodes what the copy describes, nothing is copied and
ShaderSnapshot stays immutable. A copy whose arrays differ or are unreadable
still throws.
Adds what testers reported in the Q&A thread and what our own runs
showed: confirming the GPU and the cache state, AC power and refresh
rate, the Windows exit code of an uncaught exception, Windows session
and scheduled-task start, Unity module placement and the MinGW DLLs,
a section on measuring performance, and the report fields.
Drops APS5_NO_MOUSE_CAPTURE, which main no longer has.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BywPXoZACVi8ALV4JKvuPZ
A report names the GPU as the log's `Selected GPU name=` line shows it, since AnyPS5 can fall back to llvmpipe without presentation support or pick another adapter on Windows (suggested by odntht on #6627).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BywPXoZACVi8ALV4JKvuPZ
Draft guide for running a title on AnyPS5: the build and conversion steps,
the environment variables to set for each run, what to read in the log and
the exit code, how to tell a stall from a crash, Windows-specific notes, and
what to include when reporting a result. Maintainers are asked what they need
from it in the Q&A discussion linked from the page.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BywPXoZACVi8ALV4JKvuPZ
An indirect draw drained queue 0's draw pipeline on entry and recorded every
record on the worker, so titles that draw mostly through DRAW_INDIRECT,
DRAW_INDEX_INDIRECT and DRAW_INDEX_INDIRECT_MULTI got no overlap between the
worker's capture of one draw and the committer's recording of the previous.
The draw now drains only when its records or its count overlap a write still
queued on the pipeline. Records drawn inline drain first, so they stay in
order, and the last drawn record is queued like a direct draw, carrying its
write ranges. APS5_NO_PIPELINED_INDIRECT=1 restores the drain on every
indirect draw.
agc_driver_pipelined_indirect_draw holds the committer with a blocking item and
checks that two indirect draws queue behind it and draw what a direct draw
does, and that a draw whose record a queued label writes waits for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Federico Marras