Dylan DeverillandClaude Opus 5
7b2391dd95
Holding a paddle bound to a letter produced exactly one character. The emission loop only acts on edges, so a held paddle sent one key-down and nothing further until release. That was the correct consequence of the design rather than a fault in the send path: auto-repeat is not something Windows synthesises for a key it believes is down. A physical keyboard repeats because its own firmware keeps sending make codes while the key is held, and Windows forwards each one. Injected input has no firmware behind it, so the repeat has to be generated here. Re-send the press while the paddle is held, after the user's configured delay and at their configured rate — SPI_GETKEYBOARDDELAY and SPI_GETKEYBOARDSPEED — so a paddle behaves like the key it is bound to rather than at a rate invented here. Both are captured at press time, so the rate cannot shift mid-hold. The read loop already ticks at report rate, so this is a per-frame elapsed check with no new thread or timer. Keys only. Mice do not repeat when held, so mouse-button bindings keep their one-shot behaviour, and gamepad bindings are held state in the pad report, where a repeat would mean nothing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
SteamlessController
A lightweight Windows system tray app that lets you use a Steam Controller as a standard gamepad — without Steam running.
When Steamless Mode is active, the app disables the controller's built-in keyboard/mouse emulation (lizard mode) and exposes it as a virtual Xbox 360 controller via ViGEmBus, making it compatible with any game that supports XInput or the Xbox controller.
Features
- NEW in 1.9 - Bluetooth! Use the controller wired, through the dongle, or paired over Bluetooth LE
- NEW in 1.8 - Automatically enable/disable based on if Steam is running, or a Steam game is running!
- NEW in 1.8 - Advanced debugging and local logging to help diagnose issues
- Rumble Support v2.0
- Support for multiple Steam Controllers! Long live split screen!
- New shiny UI for remapping L4/L5 R4/L5 back buttons!
- Support for Xbox OR PlayStation controllers - with PS Touchpad and Gyro plumbing.
- System tray icon shows connection and mode status
- Steamless Mode — disables lizard mode and exposes controller as Xbox 360 gamepad
- Trackpad Mouse — use the right (or left) trackpad as a mouse cursor
- Back Buttons for Clicking — the upper paddles (L4/R4) left-click by default; rebind any paddle to a gamepad button, right click, or Off
- Use Left Trackpad Instead — mirror all trackpad/back-button functionality to the left side for left-handed users
- Start with Windows — launch automatically at login
- Settings persist across restarts
Requirements
To run
- Windows 10 or later (64-bit)
- ViGEmBus driver installed
- Steam Controller — wired USB (PID
0x1302), wireless dongle (PID0x1304), or Bluetooth LE (PID0x1303, pair via Windows Bluetooth settings) - Steam closed (Steam claims the controller when running)
To build
- Visual Studio 2022 with the Desktop development with C++ workload
- CMake 3.20 or later (included with Visual Studio, or install separately)
- Windows SDK 10.0.22000 or later (installed via Visual Studio Installer)
Building
git clone https://github.com/your-username/SteamlessController.git
cd SteamlessController
cmake -B build
cmake --build build --target SteamlessController
The executable will be at build\Debug\SteamlessController.exe.
For a release build:
cmake -B build/release -G "Visual Studio 18 2025"
cmake --build build/release --config Release --target SteamlessController
If you have Visual Studio 2022, replace
"Visual Studio 18 2025"with"Visual Studio 17 2022".
CMake Targets
| Target | Description |
|---|---|
SteamlessController |
Main system tray application |
SteamProbe |
Console diagnostic tool — dumps raw HID report bytes as you interact with the controller. Useful for protocol research. |
RawControllerProbe |
Checks whether Windows.Gaming.Input.RawGameController can enumerate the Steam Controller (requires WinRT). |
How it works
The Steam Controller exposes a vendor HID collection (usage page 0xFF00) that carries all game input in a 54-byte report (ID 0x42) at ~60 Hz. By default the firmware runs in lizard mode, emulating a keyboard and mouse so the controller works without drivers.
SteamlessController sends HID feature reports to disable lizard mode, then reads the raw input reports and translates them into a virtual Xbox 360 controller via ViGEmBus. A background heartbeat re-sends the disable command every 800 ms to keep lizard mode off.
The full input report layout is documented in src/steam/SteamController.h.
Third-party
- ViGEmClient — MIT License, built from source as a static library